Commit 09df1c16 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo

I2C_foo were used for some i2c addresses. Bad, since those constants could
mean other i2c chip things.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 7c9b5048
......@@ -39,7 +39,7 @@
MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = { I2C_BT832_ALT1>>1, I2C_BT832_ALT2>>1,
static unsigned short normal_i2c[] = { I2C_ADDR_BT832_ALT1>>1, I2C_ADDR_BT832_ALT2>>1,
I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
......
......@@ -3046,7 +3046,7 @@ static void miro_pinnacle_gpio(struct bttv *btv)
gpio_inout(0xffffff, 0);
gpio = gpio_read();
id = ((gpio>>10) & 63) -1;
msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
if (id < 32) {
btv->tuner_type = miro_tunermap[id];
if (0 == (gpio & 0x20)) {
......@@ -3442,8 +3442,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
/* detect Bt832 chip for quartzsight digital camera */
if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
(bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
(bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
boot_bt832(btv);
}
......@@ -3452,19 +3452,19 @@ void __devinit bttv_init_card2(struct bttv *btv)
/* try to detect audio/fader chips */
if (!bttv_tvcards[btv->c.type].no_msp34xx &&
bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
request_module("msp3400");
if (bttv_tvcards[btv->c.type].msp34xx_alt &&
bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
request_module("msp3400");
if (!bttv_tvcards[btv->c.type].no_tda9875 &&
bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
request_module("tda9875");
if (!bttv_tvcards[btv->c.type].no_tda7432 &&
bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
request_module("tda7432");
if (bttv_tvcards[btv->c.type].needs_tvaudio)
......@@ -3475,7 +3475,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
if (btv->tda9887_conf)
tda9887 = 1;
if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
tda9887 = 1;
/* Hybrid DVB card, DOES have a tda9887 */
if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
......
......@@ -198,13 +198,13 @@ static int mxb_probe(struct saa7146_dev* dev)
/* loop through all i2c-devices on the bus and look who is there */
list_for_each(item,&mxb->i2c_adapter.clients) {
client = list_entry(item, struct i2c_client, list);
if( I2C_TEA6420_1 == client->addr )
if( I2C_ADDR_TEA6420_1 == client->addr )
mxb->tea6420_1 = client;
if( I2C_TEA6420_2 == client->addr )
if( I2C_ADDR_TEA6420_2 == client->addr )
mxb->tea6420_2 = client;
if( I2C_TEA6415C_2 == client->addr )
mxb->tea6415c = client;
if( I2C_TDA9840 == client->addr )
if( I2C_ADDR_TDA9840 == client->addr )
mxb->tda9840 = client;
if( I2C_SAA7111 == client->addr )
mxb->saa7111a = client;
......
......@@ -71,7 +71,7 @@ module_param(maxvol, int, S_IRUGO | S_IWUSR);
/* Address to scan (I2C address of this chip) */
static unsigned short normal_i2c[] = {
I2C_TDA7432 >> 1,
I2C_ADDR_TDA7432 >> 1,
I2C_CLIENT_END,
};
I2C_CLIENT_INSMOD;
......
......@@ -43,7 +43,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define TEST 0x04
/* addresses to scan, found only at 0x42 (7-Bit) */
static unsigned short normal_i2c[] = { I2C_TDA9840, I2C_CLIENT_END };
static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END };
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
......
#ifndef __INCLUDED_TDA9840__
#define __INCLUDED_TDA9840__
#define I2C_TDA9840 0x42
#define I2C_ADDR_TDA9840 0x42
#define TDA9840_DETECT _IOR('v',1,int)
/* return values for TDA9840_DETCT */
......
......@@ -40,7 +40,7 @@ MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = {
I2C_TDA9875 >> 1,
I2C_ADDR_TDA9875 >> 1,
I2C_CLIENT_END
};
I2C_CLIENT_INSMOD;
......
......@@ -40,7 +40,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
/* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END };
static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END };
/* magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
......
......@@ -2,8 +2,8 @@
#define __INCLUDED_TEA6420__
/* possible addresses */
#define I2C_TEA6420_1 0x4c
#define I2C_TEA6420_2 0x4d
#define I2C_ADDR_TEA6420_1 0x4c
#define I2C_ADDR_TEA6420_2 0x4d
struct tea6420_multiplex
{
......
......@@ -137,14 +137,14 @@ struct CHIPSTATE {
/* i2c addresses */
static unsigned short normal_i2c[] = {
I2C_TDA8425 >> 1,
I2C_TEA6300 >> 1,
I2C_TEA6420 >> 1,
I2C_TDA9840 >> 1,
I2C_TDA985x_L >> 1,
I2C_TDA985x_H >> 1,
I2C_TDA9874 >> 1,
I2C_PIC16C54 >> 1,
I2C_ADDR_TDA8425 >> 1,
I2C_ADDR_TEA6300 >> 1,
I2C_ADDR_TEA6420 >> 1,
I2C_ADDR_TDA9840 >> 1,
I2C_ADDR_TDA985x_L >> 1,
I2C_ADDR_TDA985x_H >> 1,
I2C_ADDR_TDA9874 >> 1,
I2C_ADDR_PIC16C54 >> 1,
I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
......@@ -1269,8 +1269,8 @@ static struct CHIPDESC chiplist[] = {
.name = "tda9840",
.id = I2C_DRIVERID_TDA9840,
.insmodopt = &tda9840,
.addr_lo = I2C_TDA9840 >> 1,
.addr_hi = I2C_TDA9840 >> 1,
.addr_lo = I2C_ADDR_TDA9840 >> 1,
.addr_hi = I2C_ADDR_TDA9840 >> 1,
.registers = 5,
.checkit = tda9840_checkit,
......@@ -1286,8 +1286,8 @@ static struct CHIPDESC chiplist[] = {
.id = I2C_DRIVERID_TDA9873,
.checkit = tda9873_checkit,
.insmodopt = &tda9873,
.addr_lo = I2C_TDA985x_L >> 1,
.addr_hi = I2C_TDA985x_H >> 1,
.addr_lo = I2C_ADDR_TDA985x_L >> 1,
.addr_hi = I2C_ADDR_TDA985x_H >> 1,
.registers = 3,
.flags = CHIP_HAS_INPUTSEL,
......@@ -1308,8 +1308,8 @@ static struct CHIPDESC chiplist[] = {
.checkit = tda9874a_checkit,
.initialize = tda9874a_initialize,
.insmodopt = &tda9874a,
.addr_lo = I2C_TDA9874 >> 1,
.addr_hi = I2C_TDA9874 >> 1,
.addr_lo = I2C_ADDR_TDA9874 >> 1,
.addr_hi = I2C_ADDR_TDA9874 >> 1,
.getmode = tda9874a_getmode,
.setmode = tda9874a_setmode,
......@@ -1319,8 +1319,8 @@ static struct CHIPDESC chiplist[] = {
.name = "tda9850",
.id = I2C_DRIVERID_TDA9850,
.insmodopt = &tda9850,
.addr_lo = I2C_TDA985x_L >> 1,
.addr_hi = I2C_TDA985x_H >> 1,
.addr_lo = I2C_ADDR_TDA985x_L >> 1,
.addr_hi = I2C_ADDR_TDA985x_H >> 1,
.registers = 11,
.getmode = tda985x_getmode,
......@@ -1332,8 +1332,8 @@ static struct CHIPDESC chiplist[] = {
.name = "tda9855",
.id = I2C_DRIVERID_TDA9855,
.insmodopt = &tda9855,
.addr_lo = I2C_TDA985x_L >> 1,
.addr_hi = I2C_TDA985x_H >> 1,
.addr_lo = I2C_ADDR_TDA985x_L >> 1,
.addr_hi = I2C_ADDR_TDA985x_H >> 1,
.registers = 11,
.flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
......@@ -1357,8 +1357,8 @@ static struct CHIPDESC chiplist[] = {
.name = "tea6300",
.id = I2C_DRIVERID_TEA6300,
.insmodopt = &tea6300,
.addr_lo = I2C_TEA6300 >> 1,
.addr_hi = I2C_TEA6300 >> 1,
.addr_lo = I2C_ADDR_TEA6300 >> 1,
.addr_hi = I2C_ADDR_TEA6300 >> 1,
.registers = 6,
.flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
......@@ -1379,8 +1379,8 @@ static struct CHIPDESC chiplist[] = {
.id = I2C_DRIVERID_TEA6300,
.initialize = tea6320_initialize,
.insmodopt = &tea6320,
.addr_lo = I2C_TEA6300 >> 1,
.addr_hi = I2C_TEA6300 >> 1,
.addr_lo = I2C_ADDR_TEA6300 >> 1,
.addr_hi = I2C_ADDR_TEA6300 >> 1,
.registers = 8,
.flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
......@@ -1400,8 +1400,8 @@ static struct CHIPDESC chiplist[] = {
.name = "tea6420",
.id = I2C_DRIVERID_TEA6420,
.insmodopt = &tea6420,
.addr_lo = I2C_TEA6420 >> 1,
.addr_hi = I2C_TEA6420 >> 1,
.addr_lo = I2C_ADDR_TEA6420 >> 1,
.addr_hi = I2C_ADDR_TEA6420 >> 1,
.registers = 1,
.flags = CHIP_HAS_INPUTSEL,
......@@ -1413,8 +1413,8 @@ static struct CHIPDESC chiplist[] = {
.name = "tda8425",
.id = I2C_DRIVERID_TDA8425,
.insmodopt = &tda8425,
.addr_lo = I2C_TDA8425 >> 1,
.addr_hi = I2C_TDA8425 >> 1,
.addr_lo = I2C_ADDR_TDA8425 >> 1,
.addr_hi = I2C_ADDR_TDA8425 >> 1,
.registers = 9,
.flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
......@@ -1437,8 +1437,8 @@ static struct CHIPDESC chiplist[] = {
.name = "pic16c54 (PV951)",
.id = I2C_DRIVERID_PIC16C54_PV9,
.insmodopt = &pic16c54,
.addr_lo = I2C_PIC16C54 >> 1,
.addr_hi = I2C_PIC16C54>> 1,
.addr_lo = I2C_ADDR_PIC16C54 >> 1,
.addr_hi = I2C_ADDR_PIC16C54>> 1,
.registers = 2,
.flags = CHIP_HAS_INPUTSEL,
......@@ -1456,8 +1456,8 @@ static struct CHIPDESC chiplist[] = {
/*.id = I2C_DRIVERID_TA8874Z, */
.checkit = ta8874z_checkit,
.insmodopt = &ta8874z,
.addr_lo = I2C_TDA9840 >> 1,
.addr_hi = I2C_TDA9840 >> 1,
.addr_lo = I2C_ADDR_TDA9840 >> 1,
.addr_hi = I2C_ADDR_TDA9840 >> 1,
.registers = 2,
.getmode = ta8874z_getmode,
......
/*
* V4L I2C address list
* V4L I2C address list
*
*
* Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
* Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
* Based on a previous mapping by
* Ralph Metzler (rjkm@thp.uni-koeln.de)
* Gerd Knorr <kraxel@goldbach.in-berlin.de>
* Ralph Metzler (rjkm@thp.uni-koeln.de)
* Gerd Knorr <kraxel@goldbach.in-berlin.de>
*
*/
/* bttv address list */
#define I2C_TSA5522 0xc2
#define I2C_TDA7432 0x8a
#define I2C_BT832_ALT1 0x88
#define I2C_BT832_ALT2 0x8a // alternate setting
#define I2C_TDA8425 0x82
#define I2C_TDA9840 0x84
#define I2C_TDA9850 0xb6 /* also used by 9855,9873 */
#define I2C_TDA9874 0xb0 /* also used by 9875 */
#define I2C_TDA9875 0xb0
#define I2C_HAUPEE 0xa0
#define I2C_STBEE 0xae
#define I2C_VHX 0xc0
#define I2C_MSP3400 0x80
#define I2C_MSP3400_ALT 0x88
#define I2C_TEA6300 0x80 /* also used by 6320 */
#define I2C_DPL3518 0x84
#define I2C_TDA9887 0x86
#define I2C_ADDR_TSA5522 0xc2
#define I2C_ADDR_TDA7432 0x8a
#define I2C_ADDR_BT832_ALT1 0x88
#define I2C_ADDR_BT832_ALT2 0x8a // alternate setting
#define I2C_ADDR_TDA8425 0x82
#define I2C_ADDR_TDA9840 0x84
#define I2C_ADDR_TDA9850 0xb6 /* also used by 9855,9873 */
#define I2C_ADDR_TDA9874 0xb0 /* also used by 9875 */
#define I2C_ADDR_TDA9875 0xb0
#define I2C_ADDR_HAUPEE 0xa0
#define I2C_ADDR_STBEE 0xae
#define I2C_ADDR_VHX 0xc0
#define I2C_ADDR_MSP3400 0x80
#define I2C_ADDR_MSP3400_ALT 0x88
#define I2C_ADDR_TEA6300 0x80 /* also used by 6320 */
#define I2C_ADDR_DPL3518 0x84
#define I2C_ADDR_TDA9887 0x86
/*
* i2c bus addresses for the chips supported by tvaudio.c
*/
#define I2C_TDA8425 0x82
#define I2C_TDA9840 0x84 /* also used by TA8874Z */
#define I2C_TDA985x_L 0xb4 /* also used by 9873 */
#define I2C_TDA985x_H 0xb6
#define I2C_TDA9874 0xb0 /* also used by 9875 */
#define I2C_ADDR_TDA8425 0x82
#define I2C_ADDR_TDA9840 0x84 /* also used by TA8874Z */
#define I2C_ADDR_TDA985x_L 0xb4 /* also used by 9873 */
#define I2C_ADDR_TDA985x_H 0xb6
#define I2C_ADDR_TDA9874 0xb0 /* also used by 9875 */
#define I2C_TEA6300 0x80 /* also used by 6320 */
#define I2C_TEA6420 0x98
#define I2C_ADDR_TEA6300 0x80 /* also used by 6320 */
#define I2C_ADDR_TEA6420 0x98
#define I2C_PIC16C54 0x96 /* PV951 */
#define I2C_ADDR_PIC16C54 0x96 /* PV951 */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment