arm64: dts: ti: k3-j721e-main: Add output tap delay values

Add output tap delay values as given in the latest Data Manual[1],
SPRSP36E, revised December 2019.

[1] https://www.ti.com/lit/gpn/tda4vmSigned-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201129175223.21751-2-nsekhar@ti.com

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi

@@ -1080,7 +1080,11 @@ main_sdhci0: sdhci@4f80000 {
 		bus-width = <8>;
 		mmc-hs400-1_8v;
 		mmc-ddr-1_8v;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0xf>;
+		ti,otap-del-sel-mmc-hs = <0xf>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		ti,strobe-sel = <0x77>;
 		dma-coherent;
@@ -1095,7 +1099,12 @@ main_sdhci1: sdhci@4fb0000 {
 		clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
 		assigned-clocks = <&k3_clks 92 0>;
 		assigned-clock-parents = <&k3_clks 92 1>;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
@@ -1111,7 +1120,12 @@ main_sdhci2: sdhci@4f98000 {
 		clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
 		assigned-clocks = <&k3_clks 93 0>;
 		assigned-clock-parents = <&k3_clks 93 1>;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;