Commit 0a09d9a4 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  Doc Fix: remove mention of combined mode-related kernel parameters
  libata: fix kernel-doc parameters
  Fix pata_qdi.c probe code
  pata_scc: fix compilation
  sata_via: add missing PM hooks
  sata_nv: fix ADMA freeze/thaw/irq_clear issues
  pata_pcmcia.c: add card ident for jvc cdrom
  sata_promise: SATAII-150/300 TX4 port numbering fix
  sata_promise: fix another error decode regression
  libata-acpi: fix _GTF command protocol for ATAPI devices
parents 44ce6294 e0863397
......@@ -754,14 +754,6 @@ and is between 256 and 4096 characters. It is defined in the file
inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
Format: <irq>
combined_mode= [HW] control which driver uses IDE ports in combined
mode: legacy IDE driver, libata, or both
(in the libata case, libata.atapi_enabled=1 may be
useful as well). Note that using the ide or libata
options may affect your device naming (e.g. by
changing hdc to sdb).
Format: combined (default), ide, or libata
inttest= [IA64]
io7= [HW] IO7 for Marvel based alpha systems
......
......@@ -489,8 +489,7 @@ static void taskfile_load_raw(struct ata_port *ap,
/* convert gtf to tf */
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
tf.protocol = atadev->class == ATA_DEV_ATAPI ?
ATA_PROT_ATAPI_NODATA : ATA_PROT_NODATA;
tf.protocol = ATA_PROT_NODATA;
tf.feature = gtf->tfa[0]; /* 0x1f1 */
tf.nsect = gtf->tfa[1]; /* 0x1f2 */
tf.lbal = gtf->tfa[2]; /* 0x1f3 */
......
......@@ -895,6 +895,7 @@ static u64 ata_read_native_max_address(struct ata_device *dev)
/**
* ata_set_native_max_address_ext - LBA48 native max set
* @dev: Device to query
* @new_sectors: new max sectors value to set for the device
*
* Perform an LBA48 size set max upon the device in question. Return the
* actual LBA48 size or zero if the command fails.
......@@ -932,6 +933,7 @@ static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sector
/**
* ata_set_native_max_address - LBA28 native max set
* @dev: Device to query
* @new_sectors: new max sectors value to set for the device
*
* Perform an LBA28 size set max upon the device in question. Return the
* actual LBA28 size or zero if the command fails.
......
......@@ -357,6 +357,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
......
......@@ -375,7 +375,7 @@ static __init int qdi_init(void)
res = inb(port + 3);
if (res & 1) {
/* Single channel mode */
if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04))
if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
ct++;
} else {
/* Dual channel mode */
......
......@@ -1142,14 +1142,14 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static int printed_version;
unsigned int board_idx = (unsigned int) ent->driver_data;
const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
struct device *dev = &pdev->dev;
struct ata_host *host;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
host = ata_port_alloc_pinfo(&pdev->dev, ppi, 1);
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
if (!host)
return -ENOMEM;
......
......@@ -257,6 +257,8 @@ static void nv_adma_port_stop(struct ata_port *ap);
static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int nv_adma_port_resume(struct ata_port *ap);
#endif
static void nv_adma_freeze(struct ata_port *ap);
static void nv_adma_thaw(struct ata_port *ap);
static void nv_adma_error_handler(struct ata_port *ap);
static void nv_adma_host_stop(struct ata_host *host);
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
......@@ -444,8 +446,8 @@ static const struct ata_port_operations nv_adma_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.freeze = nv_adma_freeze,
.thaw = nv_adma_thaw,
.error_handler = nv_adma_error_handler,
.post_internal_cmd = nv_adma_post_internal_cmd,
.data_xfer = ata_data_xfer,
......@@ -815,8 +817,16 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
u16 status;
u32 gen_ctl;
u32 notifier, notifier_error;
/* if ADMA is disabled, use standard ata interrupt handler */
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
>> (NV_INT_PORT_SHIFT * i);
handled += nv_host_intr(ap, irq_stat);
continue;
}
/* if in ATA register mode, use standard ata interrupt handler */
/* if in ATA register mode, check for standard interrupts */
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
>> (NV_INT_PORT_SHIFT * i);
......@@ -826,7 +836,6 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
command is active, to prevent losing interrupts. */
irq_stat |= NV_INT_DEV;
handled += nv_host_intr(ap, irq_stat);
continue;
}
notifier = readl(mmio + NV_ADMA_NOTIFIER);
......@@ -912,22 +921,77 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
static void nv_adma_freeze(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
void __iomem *mmio = pp->ctl_block;
u16 tmp;
nv_ck804_freeze(ap);
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
return;
/* clear any outstanding CK804 notifications */
writeb( NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT),
ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
/* Disable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
writew( tmp & ~(NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
}
static void nv_adma_thaw(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
void __iomem *mmio = pp->ctl_block;
u16 tmp;
nv_ck804_thaw(ap);
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
return;
/* Enable interrupt */
tmp = readw(mmio + NV_ADMA_CTL);
writew( tmp | (NV_ADMA_CTL_AIEN | NV_ADMA_CTL_HOTPLUG_IEN),
mmio + NV_ADMA_CTL);
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
}
static void nv_adma_irq_clear(struct ata_port *ap)
{
struct nv_adma_port_priv *pp = ap->private_data;
void __iomem *mmio = pp->ctl_block;
u16 status = readw(mmio + NV_ADMA_STAT);
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
void __iomem *dma_stat_addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
u32 notifier_clears[2];
/* clear ADMA status */
writew(status, mmio + NV_ADMA_STAT);
writel(notifier | notifier_error,
pp->notifier_clear_block);
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
ata_bmdma_irq_clear(ap);
return;
}
/* clear any outstanding CK804 notifications */
writeb( NV_INT_ALL << (ap->port_no * NV_INT_PORT_SHIFT),
ap->host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
/** clear legacy status */
iowrite8(ioread8(dma_stat_addr), dma_stat_addr);
/* clear ADMA status */
writew(0xffff, mmio + NV_ADMA_STAT);
/* clear notifiers - note both ports need to be written with
something even though we are only clearing on one */
if (ap->port_no == 0) {
notifier_clears[0] = 0xFFFFFFFF;
notifier_clears[1] = 0;
} else {
notifier_clears[0] = 0;
notifier_clears[1] = 0xFFFFFFFF;
}
pp = ap->host->ports[0]->private_data;
writel(notifier_clears[0], pp->notifier_clear_block);
pp = ap->host->ports[1]->private_data;
writel(notifier_clears[1], pp->notifier_clear_block);
}
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
......
......@@ -45,7 +45,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
#define DRV_VERSION "2.05"
#define DRV_VERSION "2.07"
enum {
......@@ -653,6 +653,8 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
qc->err_mask |= ac_err_mask;
pdc_reset_port(ap);
ata_port_abort(ap);
}
static inline unsigned int pdc_host_intr( struct ata_port *ap,
......@@ -924,6 +926,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
struct ata_host *host;
void __iomem *base;
int n_ports, i, rc;
int is_sataii_tx4;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
......@@ -962,10 +965,23 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
}
host->iomap = pcim_iomap_table(pdev);
for (i = 0; i < host->n_ports; i++)
is_sataii_tx4 = 0;
if ((pi->flags & (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) == (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) {
is_sataii_tx4 = 1;
dev_printk(KERN_INFO, &pdev->dev, "applying SATAII TX4 port numbering workaround\n");
}
for (i = 0; i < host->n_ports; i++) {
static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
int ata_nr;
ata_nr = i;
if (is_sataii_tx4)
ata_nr = sataii_tx4_port_remap[i];
pdc_ata_setup_port(host->ports[i],
base + 0x200 + i * 0x80,
base + 0x400 + i * 0x100);
base + 0x200 + ata_nr * 0x80,
base + 0x400 + ata_nr * 0x100);
}
/* initialize adapter */
pdc_host_init(host);
......
......@@ -93,6 +93,10 @@ static struct pci_driver svia_pci_driver = {
.name = DRV_NAME,
.id_table = svia_pci_tbl,
.probe = svia_init_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
.remove = ata_pci_remove_one,
};
......@@ -112,6 +116,10 @@ static struct scsi_host_template svia_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const struct ata_port_operations vt6420_sata_ops = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment