Commit 0a0f7cc2 authored by Peng Fan's avatar Peng Fan Committed by Shawn Guo

soc: imx: add i.MX93 SRC power domain driver

Support controlling power domain managed by System Reset
Controller(SRC). Current supported power domain is mediamix power
domain.
Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent df5a6965
...@@ -20,4 +20,12 @@ config SOC_IMX8M ...@@ -20,4 +20,12 @@ config SOC_IMX8M
support, it will provide the SoC info like SoC family, support, it will provide the SoC info like SoC family,
ID and revision etc. ID and revision etc.
config SOC_IMX9
tristate "i.MX9 SoC family support"
depends on ARCH_MXC || COMPILE_TEST
default ARCH_MXC && ARM64
select SOC_BUS
help
If you say yes here, you get support for the NXP i.MX9 family
endmenu endmenu
...@@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o ...@@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2022 NXP
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/of_device.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#define MIX_SLICE_SW_CTRL_OFF 0x20
#define SLICE_SW_CTRL_PSW_CTRL_OFF_MASK BIT(4)
#define SLICE_SW_CTRL_PDN_SOFT_MASK BIT(31)
#define MIX_FUNC_STAT_OFF 0xB4
#define FUNC_STAT_PSW_STAT_MASK BIT(0)
#define FUNC_STAT_RST_STAT_MASK BIT(2)
#define FUNC_STAT_ISO_STAT_MASK BIT(4)
struct imx93_power_domain {
struct generic_pm_domain genpd;
struct device *dev;
void __iomem *addr;
struct clk_bulk_data *clks;
int num_clks;
bool init_off;
};
#define to_imx93_pd(_genpd) container_of(_genpd, struct imx93_power_domain, genpd)
static int imx93_pd_on(struct generic_pm_domain *genpd)
{
struct imx93_power_domain *domain = to_imx93_pd(genpd);
void __iomem *addr = domain->addr;
u32 val;
int ret;
ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
if (ret) {
dev_err(domain->dev, "failed to enable clocks for domain: %s\n", genpd->name);
return ret;
}
val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
val &= ~SLICE_SW_CTRL_PDN_SOFT_MASK;
writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
!(val & FUNC_STAT_ISO_STAT_MASK), 1, 10000);
if (ret) {
dev_err(domain->dev, "pd_on timeout: name: %s, stat: %x\n", genpd->name, val);
return ret;
}
return 0;
}
static int imx93_pd_off(struct generic_pm_domain *genpd)
{
struct imx93_power_domain *domain = to_imx93_pd(genpd);
void __iomem *addr = domain->addr;
int ret;
u32 val;
/* Power off MIX */
val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
val |= SLICE_SW_CTRL_PDN_SOFT_MASK;
writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
val & FUNC_STAT_PSW_STAT_MASK, 1, 1000);
if (ret) {
dev_err(domain->dev, "pd_off timeout: name: %s, stat: %x\n", genpd->name, val);
return ret;
}
clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
return 0;
};
static int imx93_pd_remove(struct platform_device *pdev)
{
struct imx93_power_domain *domain = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
if (!domain->init_off)
clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
of_genpd_del_provider(np);
pm_genpd_remove(&domain->genpd);
return 0;
}
static int imx93_pd_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct imx93_power_domain *domain;
int ret;
domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
if (!domain)
return -ENOMEM;
domain->addr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(domain->addr))
return PTR_ERR(domain->addr);
domain->num_clks = devm_clk_bulk_get_all(dev, &domain->clks);
if (domain->num_clks < 0)
return dev_err_probe(dev, domain->num_clks, "Failed to get domain's clocks\n");
domain->genpd.name = dev_name(dev);
domain->genpd.power_off = imx93_pd_off;
domain->genpd.power_on = imx93_pd_on;
domain->dev = dev;
domain->init_off = readl(domain->addr + MIX_FUNC_STAT_OFF) & FUNC_STAT_ISO_STAT_MASK;
/* Just to sync the status of hardware */
if (!domain->init_off) {
ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
if (ret) {
dev_err(domain->dev, "failed to enable clocks for domain: %s\n",
domain->genpd.name);
return ret;
}
}
ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
if (ret)
return ret;
platform_set_drvdata(pdev, domain);
return of_genpd_add_provider_simple(np, &domain->genpd);
}
static const struct of_device_id imx93_pd_ids[] = {
{ .compatible = "fsl,imx93-src-slice" },
{ }
};
MODULE_DEVICE_TABLE(of, imx93_pd_ids);
static struct platform_driver imx93_power_domain_driver = {
.driver = {
.name = "imx93_power_domain",
.owner = THIS_MODULE,
.of_match_table = imx93_pd_ids,
},
.probe = imx93_pd_probe,
.remove = imx93_pd_remove,
};
module_platform_driver(imx93_power_domain_driver);
MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
MODULE_DESCRIPTION("NXP i.MX93 power domain driver");
MODULE_LICENSE("GPL");
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2022 NXP
*/
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
static int imx93_src_probe(struct platform_device *pdev)
{
return devm_of_platform_populate(&pdev->dev);
}
static const struct of_device_id imx93_src_ids[] = {
{ .compatible = "fsl,imx93-src" },
{ }
};
MODULE_DEVICE_TABLE(of, imx93_src_ids);
static struct platform_driver imx93_src_driver = {
.driver = {
.name = "imx93_src",
.owner = THIS_MODULE,
.of_match_table = imx93_src_ids,
},
.probe = imx93_src_probe,
};
module_platform_driver(imx93_src_driver);
MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
MODULE_DESCRIPTION("NXP i.MX93 src driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment