Commit 0a19ea8e authored by Vojtech Pavlik's avatar Vojtech Pavlik

Merge suse.cz:/home/vojtech/bk/linus into suse.cz:/home/vojtech/bk/input

parents 27e0f0fe 99f30a27
......@@ -174,11 +174,18 @@ running once the system is up.
atascsi= [HW,SCSI] Atari SCSI
atkbd.set= [HW] Select keyboard code set
Format: <int>
atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess, EzKey
and similar keyboards
atkbd.reset= [HW] Reset keyboard during initialization
atkbd.set= [HW] Select keyboard code set
Format: <int> (2 = AT (default) 3 = PS/2)
atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar keyboards
atkbd.softrepeat=
[HW] Use software keyboard repeat
atkbd.reset= [HW] Reset keyboard during initialization
autotest [IA64]
......
......@@ -28,7 +28,7 @@ in the package: See the file COPYING.
1. Usage
~~~~~~~~
The drivers/usb/acm.c drivers works with USB modems and USB ISDN terminal
The drivers/usb/class/cdc-acm.c drivers works with USB modems and USB ISDN terminal
adapters that conform to the Universal Serial Bus Communication Device Class
Abstract Control Model (USB CDC ACM) specification.
......@@ -65,9 +65,9 @@ minor/major numbers anywhere you want, but either the above location or
To use the modems you need these modules loaded:
usbcore.o
usb-[uo]hci.o or uhci.o
acm.o
usbcore.ko
uhci-hcd.ko ohci-hcd.ko or ehci-hcd.ko
cdc-acm.ko
After that, the modem[s] should be accessible. You should be able to use
minicom, ppp and mgetty with them.
......
......@@ -216,11 +216,6 @@ source "drivers/input/Kconfig"
source "drivers/char/Kconfig"
config KBDMOUSE
bool
depends on ARCH_ACORN && BUSMOUSE=y
default y
source "drivers/media/Kconfig"
source "fs/Kconfig"
......
......@@ -588,30 +588,6 @@ config PC9800_OLDLP_CONSOLE
bool "Support for console on line printer"
depends on PC9800_OLDLP
menu "Mice"
config BUSMOUSE
tristate "Bus Mouse Support"
---help---
Say Y here if your machine has a bus mouse as opposed to a serial
mouse. Most people have a regular serial MouseSystem or
Microsoft mouse (made by Logitech) that plugs into a COM port
(rectangular with 9 or 25 pins). These people say N here.
If you have a laptop, you either have to check the documentation or
experiment a bit to find out whether the trackball is a serial mouse
or not; it's best to say Y here for you.
This is the generic bus mouse driver code. If you have a bus mouse,
you will have to say Y here and also to the specific driver for your
mouse below.
To compile this driver as a module, choose M here: the
module will be called busmouse.
endmenu
config QIC02_TAPE
tristate "QIC-02 tape support"
help
......
......@@ -49,7 +49,6 @@ obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
obj-$(CONFIG_PC9800_OLDLP) += lp_old98.o
obj-$(CONFIG_BUSMOUSE) += busmouse.o
obj-$(CONFIG_DTLK) += dtlk.o
obj-$(CONFIG_R3964) += n_r3964.o
obj-$(CONFIG_APPLICOM) += applicom.o
......
......@@ -77,7 +77,7 @@ static void ns558_isa_probe(int io)
* No one should be using this address.
*/
if (check_region(io, 1))
if (!request_region(io, 1, "ns558-isa"))
return;
/*
......@@ -89,7 +89,8 @@ static void ns558_isa_probe(int io)
outb(~c & ~3, io);
if (~(u = v = inb(io)) & 3) {
outb(c, io);
return;
i = 0;
goto out;
}
/*
* After a trigger, there must be at least some bits changing.
......@@ -99,7 +100,8 @@ static void ns558_isa_probe(int io)
if (u == v) {
outb(c, io);
return;
i = 0;
goto out;
}
wait_ms(3);
/*
......@@ -110,7 +112,8 @@ static void ns558_isa_probe(int io)
for (i = 0; i < 1000; i++)
if ((u ^ inb(io)) & 0xf) {
outb(c, io);
return;
i = 0;
goto out;
}
/*
* And now find the number of mirrors of the port.
......@@ -118,7 +121,9 @@ static void ns558_isa_probe(int io)
for (i = 1; i < 5; i++) {
if (check_region(io & (-1 << i), (1 << i))) /* Don't disturb anyone */
release_region(io & (-1 << (i-1)), (1 << (i-1)));
if (!request_region(io & (-1 << i), (1 << i), "ns558-isa")) /* Don't disturb anyone */
break;
outb(0xff, io & (-1 << i));
......@@ -126,18 +131,25 @@ static void ns558_isa_probe(int io)
if (inb(io & (-1 << i)) != inb((io & (-1 << i)) + (1 << i) - 1)) b++;
wait_ms(3);
if (b > 300) /* We allow 30% difference */
if (b > 300) { /* We allow 30% difference */
release_region(io & (-1 << i), (1 << i));
break;
}
}
i--;
if (i != 4) {
if (!request_region(io & (-1 << i), (1 << i), "ns558-isa"))
return;
}
if (!(port = kmalloc(sizeof(struct ns558), GFP_KERNEL))) {
printk(KERN_ERR "ns558: Memory allocation failed.\n");
return;
goto out;
}
memset(port, 0, sizeof(struct ns558));
memset(port, 0, sizeof(struct ns558));
port->type = NS558_ISA;
port->size = (1 << i);
port->gameport.io = io;
......@@ -148,8 +160,6 @@ static void ns558_isa_probe(int io)
sprintf(port->phys, "isa%04x/gameport0", io & (-1 << i));
sprintf(port->name, "NS558 ISA");
request_region(io & (-1 << i), (1 << i), "ns558-isa");
gameport_register_port(&port->gameport);
printk(KERN_INFO "gameport: NS558 ISA at %#x", port->gameport.io);
......@@ -157,6 +167,9 @@ static void ns558_isa_probe(int io)
printk(" speed %d kHz\n", port->gameport.speed);
list_add(&port->node, &ns558_list);
return;
out:
release_region(io & (-1 << i), (1 << i));
}
#ifdef CONFIG_PNP
......
......@@ -17,6 +17,7 @@ config KEYBOARD_ATKBD
depends on INPUT && INPUT_KEYBOARD
select SERIO
select SERIO_I8042 if PC
select SERIO_GSCPS2 if GSC
help
Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
you'll need this, unless you have a different type keyboard (USB, ADB
......
......@@ -37,14 +37,13 @@ MODULE_LICENSE("GPL");
static int atkbd_set = 2;
module_param_named(set, atkbd_set, int, 0);
MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3, 4)");
MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
static int atkbd_reset;
#else
static int atkbd_reset = 1;
#endif
static int atkbd_softrepeat;
module_param_named(reset, atkbd_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
......@@ -52,6 +51,14 @@ static int atkbd_softrepeat;
module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
static int atkbd_scroll;
module_param_named(scroll, atkbd_scroll, bool, 0);
MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
static int atkbd_extra;
module_param_named(extra, atkbd_extra, bool, 0);
MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
/*
* Scancode to keycode tables. These are just the default setting, and
* are loadable via an userland utility.
......@@ -127,11 +134,11 @@ static unsigned char atkbd_unxlate_table[128] = {
#define ATKBD_CMD_EX_SETLEDS 0x20eb
#define ATKBD_CMD_OK_GETID 0x02e8
#define ATKBD_RET_ACK 0xfa
#define ATKBD_RET_NAK 0xfe
#define ATKBD_RET_BAT 0xaa
#define ATKBD_RET_EMUL0 0xe0
#define ATKBD_RET_EMULX 0x80
#define ATKBD_RET_EMUL1 0xe1
#define ATKBD_RET_RELEASE 0xf0
#define ATKBD_RET_HANGUEL 0xf1
......@@ -141,6 +148,22 @@ static unsigned char atkbd_unxlate_table[128] = {
#define ATKBD_KEY_UNKNOWN 0
#define ATKBD_KEY_NULL 255
#define ATKBD_SCR_1 254
#define ATKBD_SCR_2 253
#define ATKBD_SCR_4 252
#define ATKBD_SCR_8 251
#define ATKBD_SCR_CLICK 250
#define ATKBD_SPECIAL 250
static unsigned char atkbd_scroll_keys[5][2] = {
{ ATKBD_SCR_1, 0x45 },
{ ATKBD_SCR_2, 0x29 },
{ ATKBD_SCR_4, 0x36 },
{ ATKBD_SCR_8, 0x27 },
{ ATKBD_SCR_CLICK, 0x60 },
};
/*
* The atkbd control structure
*/
......@@ -155,6 +178,7 @@ struct atkbd {
unsigned char cmdbuf[4];
unsigned char cmdcnt;
unsigned char set;
unsigned char extra;
unsigned char release;
int lastkey;
volatile signed char ack;
......@@ -189,6 +213,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
{
struct atkbd *atkbd = serio->private;
unsigned int code = data;
int scroll = 0, click = -1;
int value;
#ifdef ATKBD_DEBUG
......@@ -284,6 +309,21 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
else
printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' to make it known.\n", code & 0x80 ? "e0" : "", code & 0x7f);
break;
case ATKBD_SCR_1:
scroll = 1 - atkbd->release * 2;
break;
case ATKBD_SCR_2:
scroll = 2 - atkbd->release * 4;
break;
case ATKBD_SCR_4:
scroll = 4 - atkbd->release * 8;
break;
case ATKBD_SCR_8:
scroll = 8 - atkbd->release * 16;
break;
case ATKBD_SCR_CLICK:
click = !atkbd->release;
break;
default:
value = atkbd->release ? 0 :
(1 + (!atkbd_softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key)));
......@@ -305,6 +345,13 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
atkbd_report_key(&atkbd->dev, regs, atkbd->keycode[code], value);
}
if (scroll || click != -1) {
input_regs(&atkbd->dev, regs);
input_report_key(&atkbd->dev, BTN_MIDDLE, click);
input_report_rel(&atkbd->dev, REL_WHEEL, scroll);
input_sync(&atkbd->dev);
}
atkbd->release = 0;
out:
return IRQ_HANDLED;
......@@ -420,7 +467,7 @@ static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int co
| (test_bit(LED_CAPSL, dev->led) ? 4 : 0);
atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS);
if (atkbd->set == 4) {
if (atkbd->extra) {
param[0] = 0;
param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
| (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0)
......@@ -529,21 +576,22 @@ static int atkbd_set_3(struct atkbd *atkbd)
return 3;
}
if (atkbd_set != 2)
if (!atkbd_command(atkbd, param, ATKBD_CMD_OK_GETID)) {
atkbd->id = param[0] << 8 | param[1];
if (atkbd_extra) {
param[0] = 0x71;
if (!atkbd_command(atkbd, param, ATKBD_CMD_EX_ENABLE)) {
atkbd->extra = 1;
return 2;
}
if (atkbd_set == 4) {
param[0] = 0x71;
if (!atkbd_command(atkbd, param, ATKBD_CMD_EX_ENABLE))
return 4;
}
if (atkbd_set != 3)
return 2;
if (!atkbd_command(atkbd, param, ATKBD_CMD_OK_GETID)) {
atkbd->id = param[0] << 8 | param[1];
return 2;
}
param[0] = 3;
if (atkbd_command(atkbd, param, ATKBD_CMD_SSCANSET))
return 2;
......@@ -696,24 +744,32 @@ static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
atkbd->id = 0xab00;
}
if (atkbd->set == 4) {
if (atkbd->extra) {
atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) | BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC);
sprintf(atkbd->name, "AT Set 2 Extended keyboard");
sprintf(atkbd->name, "AT Set 2 Extra keyboard");
} else
sprintf(atkbd->name, "AT %s Set %d keyboard",
atkbd->translated ? "Translated" : "Raw", atkbd->set);
sprintf(atkbd->phys, "%s/input0", serio->phys);
if (atkbd_scroll) {
for (i = 0; i < 5; i++)
atkbd_set2_keycode[atkbd_scroll_keys[i][1]] = atkbd_scroll_keys[i][0];
atkbd->dev.evbit[0] |= BIT(EV_REL);
atkbd->dev.relbit[0] = BIT(REL_WHEEL);
set_bit(BTN_MIDDLE, atkbd->dev.keybit);
}
if (atkbd->translated) {
for (i = 0; i < 128; i++) {
atkbd->keycode[i] = atkbd_set2_keycode[atkbd_unxlate_table[i]];
atkbd->keycode[i | 0x80] = atkbd_set2_keycode[atkbd_unxlate_table[i] | 0x80];
}
} else if (atkbd->set == 2) {
memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
} else {
} else if (atkbd->set == 3) {
memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
} else {
memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
}
atkbd->dev.name = atkbd->name;
......@@ -724,7 +780,7 @@ static void atkbd_connect(struct serio *serio, struct serio_dev *dev)
atkbd->dev.id.version = atkbd->id;
for (i = 0; i < 512; i++)
if (atkbd->keycode[i] && atkbd->keycode[i] < 255)
if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
set_bit(atkbd->keycode[i], atkbd->dev.keybit);
input_register_device(&atkbd->dev);
......@@ -741,46 +797,20 @@ static int atkbd_reconnect(struct serio *serio)
{
struct atkbd *atkbd = serio->private;
struct serio_dev *dev = serio->dev;
int i;
if (!dev) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
if (!dev) {
printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
return -1;
}
if (atkbd->write) {
if (atkbd_probe(atkbd))
return -1;
atkbd->set = atkbd_set_3(atkbd);
if (atkbd->set != atkbd_set_3(atkbd))
return -1;
atkbd_enable(atkbd);
} else {
atkbd->set = 2;
atkbd->id = 0xab00;
}
/*
* Here we probably should check if the keyboard has the same set that
* it had before and bail out if it's different. But this will most likely
* cause new keyboard device be created... and for the user it will look
* like keyboard is lost
*/
if (atkbd->translated) {
for (i = 0; i < 128; i++) {
atkbd->keycode[i] = atkbd_set2_keycode[atkbd_unxlate_table[i]];
atkbd->keycode[i | 0x80] = atkbd_set2_keycode[atkbd_unxlate_table[i] | 0x80];
}
} else if (atkbd->set == 2) {
memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
} else {
memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
}
for (i = 0; i < 512; i++)
if (atkbd->keycode[i] && atkbd->keycode[i] < 255)
set_bit(atkbd->keycode[i], atkbd->dev.keybit);
return 0;
}
......
This diff is collapsed.
......@@ -77,6 +77,7 @@ struct sunkbd {
struct input_dev dev;
struct serio *serio;
struct work_struct tq;
wait_queue_head_t wait;
char name[64];
char phys[32];
char type;
......@@ -96,11 +97,13 @@ static irqreturn_t sunkbd_interrupt(struct serio *serio,
if (sunkbd->reset <= -1) { /* If cp[i] is 0xff, sunkbd->reset will stay -1. */
sunkbd->reset = data; /* The keyboard sends 0xff 0xff 0xID on powerup */
wake_up_interruptible(&sunkbd->wait);
goto out;
}
if (sunkbd->layout == -1) {
sunkbd->layout = data;
wake_up_interruptible(&sunkbd->wait);
goto out;
}
......@@ -176,22 +179,19 @@ static int sunkbd_event(struct input_dev *dev, unsigned int type, unsigned int c
static int sunkbd_initialize(struct sunkbd *sunkbd)
{
int t;
t = 1000;
sunkbd->reset = -2;
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET);
while (sunkbd->reset < 0 && --t) mdelay(1);
if (!t) return -1;
wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
if (sunkbd->reset <0)
return -1;
sunkbd->type = sunkbd->reset;
if (sunkbd->type == 4) { /* Type 4 keyboard */
t = 250;
sunkbd->layout = -2;
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_LAYOUT);
while (sunkbd->layout < 0 && --t) mdelay(1);
if (!t) return -1;
wait_event_interruptible_timeout(sunkbd->wait, sunkbd->layout >= 0, HZ/4);
if (sunkbd->layout < 0) return -1;
if (sunkbd->layout & SUNKBD_LAYOUT_5_MASK) sunkbd->type = 5;
}
......@@ -206,9 +206,8 @@ static int sunkbd_initialize(struct sunkbd *sunkbd)
static void sunkbd_reinit(void *data)
{
struct sunkbd *sunkbd = data;
int t = 1000;
while (sunkbd->reset < 0 && --t) mdelay(1);
wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
sunkbd->serio->write(sunkbd->serio,
......@@ -239,6 +238,7 @@ static void sunkbd_connect(struct serio *serio, struct serio_dev *dev)
memset(sunkbd, 0, sizeof(struct sunkbd));
init_input_dev(&sunkbd->dev);
init_waitqueue_head(&sunkbd->wait);
sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
......@@ -275,7 +275,7 @@ static void sunkbd_connect(struct serio *serio, struct serio_dev *dev)
set_bit(sunkbd->keycode[i], sunkbd->dev.keybit);
clear_bit(0, sunkbd->dev.keybit);
sprintf(sunkbd->name, "%s/input", serio->phys);
sprintf(sunkbd->phys, "%s/input0", serio->phys);
sunkbd->dev.name = sunkbd->name;
sunkbd->dev.phys = sunkbd->phys;
......
......@@ -54,12 +54,3 @@ config INPUT_UINPUT
To compile this driver as a module, choose M here: the
module will be called uinput.
config INPUT_GSC
tristate "PA-RISC GSC PS/2 keyboard/mouse support"
depends on GSC && INPUT && INPUT_MISC
help
Say Y here if you have a PS/2 keyboard and/or mouse attached
to your PA-RISC box. HP run the keyboard in AT mode rather than
XT mode like everyone else, so we need our own driver.
Furthermore, the GSC PS/2 controller shares IRQ between mouse and
keyboard.
......@@ -9,4 +9,3 @@ obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_GSC) += gsc_ps2.o
This diff is collapsed.
......@@ -17,6 +17,7 @@ config MOUSE_PS2
depends on INPUT && INPUT_MOUSE
select SERIO
select SERIO_I8042 if PC
select SERIO_GSCPS2 if GSC
---help---
Say Y here if you have a PS/2 mouse connected to your system. This
includes the standard 2 or 3-button PS/2 mouse, as well as PS/2
......
......@@ -20,6 +20,7 @@ config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
select SERIO
depends on !PARISC
---help---
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
......@@ -48,6 +49,7 @@ config SERIO_SERPORT
config SERIO_CT82C710
tristate "ct82c710 Aux port controller"
depends on SERIO
depends on !PARISC
---help---
Say Y here if you have a Texas Instruments TravelMate notebook
equipped with the ct82c710 chip and want to use a mouse connected
......@@ -105,6 +107,20 @@ config SERIO_98KBD
To compile this driver as a module, choose M here: the
module will be called 98kbd-io.
config SERIO_GSCPS2
tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
depends on GSC && SERIO
default y
help
This driver provides support for the PS/2 ports on PA-RISC machines
over which HP PS/2 keyboards and PS/2 mice may be connected.
If you use these devices, you'll need to say Y here.
It's safe to enable this driver, so if unsure, say Y.
To compile this driver as a module, choose M here: the
module will be called gscps2.
config SERIO_PCIPS2
tristate "PCI PS/2 keyboard and PS/2 mouse controller"
depends on PCI && SERIO
......
......@@ -14,4 +14,5 @@ obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
obj-$(CONFIG_SERIO_98KBD) += 98kbd-io.o
obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
This diff is collapsed.
......@@ -224,6 +224,9 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
offset = report->size;
report->size += parser->global.report_size * parser->global.report_count;
if (usages < parser->global.report_count)
usages = parser->global.report_count;
if (usages == 0)
return 0; /* ignore padding fields */
......@@ -235,9 +238,13 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
field->application = hid_lookup_collection(parser, HID_COLLECTION_APPLICATION);
for (i = 0; i < usages; i++) {
field->usage[i].hid = parser->local.usage[i];
int j = i;
/* Duplicate the last usage we parsed if we have excess values */
if (i >= parser->local.usage_index)
j = parser->local.usage_index - 1;
field->usage[i].hid = parser->local.usage[j];
field->usage[i].collection_index =
parser->local.collection_index[i];
parser->local.collection_index[j];
}
field->maxusage = usages;
......@@ -1315,7 +1322,6 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
#define USB_VENDOR_ID_AIPTEK 0x08ca
#define USB_DEVICE_ID_AIPTEK_6000 0x0020
......@@ -1354,17 +1360,40 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_A4TECH 0x09DA
#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
#define USB_VENDOR_ID_CYPRESS 0x04b4
#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
#define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
#define USB_VENDOR_ID_ALPS 0x0433
#define USB_DEVICE_ID_IBM_GAMEPAD 0x1101
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
struct hid_blacklist {
__u16 idVendor;
__u16 idProduct;
unsigned quirks;
} hid_blacklist[] = {
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_6000, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
......@@ -1386,32 +1415,24 @@ struct hid_blacklist {
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 4, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_6000, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD|HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD|HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD|HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE, HID_QUIRK_2WHEEL_MOUSE_HACK },
{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
{ 0, 0 }
};
......
......@@ -432,20 +432,21 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
input_regs(input, regs);
if ((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK)
&& (usage->code == BTN_BACK)) {
&& (usage->code == BTN_BACK || usage->code == BTN_EXTRA)) {
if (value)
hid->quirks |= HID_QUIRK_2WHEEL_MOUSE_HACK_ON;
else
hid->quirks &= ~HID_QUIRK_2WHEEL_MOUSE_HACK_ON;
return;
}
if ((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_ON)
&& (usage->code == REL_WHEEL)) {
input_event(input, usage->type, REL_HWHEEL, value);
return;
}
if (usage->hat_min != usage->hat_max) {
if (usage->hat_min != usage->hat_max ) { /* FIXME: hat_max can be 0 and hat_min 1 */
value = (value - usage->hat_min) * 8 / (usage->hat_max - usage->hat_min + 1) + 1;
if (value < 0 || value > 8) value = 0;
input_event(input, usage->type, usage->code , hid_hat_to_axis[value].x);
......@@ -484,7 +485,7 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
return;
}
if((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UKNOWN */
if((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */
return;
input_event(input, usage->type, usage->code, value);
......
......@@ -403,7 +403,8 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
struct hiddev_collection_info cinfo;
struct hiddev_report_info rinfo;
struct hiddev_field_info finfo;
struct hiddev_usage_ref uref;
struct hiddev_usage_ref_multi uref_multi;
struct hiddev_usage_ref *uref = &uref_multi.uref;
struct hiddev_devinfo dinfo;
struct hid_report *report;
struct hid_field *field;
......@@ -575,68 +576,98 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
return 0;
case HIDIOCGUCODE:
if (copy_from_user(&uref, (void *) arg, sizeof(uref)))
if (copy_from_user(uref, (void *) arg, sizeof(*uref)))
return -EFAULT;
rinfo.report_type = uref.report_type;
rinfo.report_id = uref.report_id;
rinfo.report_type = uref->report_type;
rinfo.report_id = uref->report_id;
if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
return -EINVAL;
if (uref.field_index >= report->maxfield)
if (uref->field_index >= report->maxfield)
return -EINVAL;
field = report->field[uref.field_index];
if (uref.usage_index >= field->maxusage)
field = report->field[uref->field_index];
if (uref->usage_index >= field->maxusage)
return -EINVAL;
uref.usage_code = field->usage[uref.usage_index].hid;
uref->usage_code = field->usage[uref->usage_index].hid;
if (copy_to_user((void *) arg, &uref, sizeof(uref)))
if (copy_to_user((void *) arg, uref, sizeof(*uref)))
return -EFAULT;
return 0;
case HIDIOCGUSAGE:
case HIDIOCSUSAGE:
case HIDIOCGUSAGES:
case HIDIOCSUSAGES:
case HIDIOCGCOLLECTIONINDEX:
if (copy_from_user(&uref, (void *) arg, sizeof(uref)))
return -EFAULT;
if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
if (copy_from_user(&uref_multi, (void *) arg,
sizeof(uref_multi)))
return -EFAULT;
} else {
if (copy_from_user(uref, (void *) arg, sizeof(*uref)))
return -EFAULT;
}
if (cmd != HIDIOCGUSAGE && uref.report_type == HID_REPORT_TYPE_INPUT)
return -EINVAL;
if (cmd != HIDIOCGUSAGE &&
cmd != HIDIOCGUSAGES &&
uref->report_type == HID_REPORT_TYPE_INPUT)
return -EINVAL;
if (uref.report_id == HID_REPORT_ID_UNKNOWN) {
field = hiddev_lookup_usage(hid, &uref);
if (uref->report_id == HID_REPORT_ID_UNKNOWN) {
field = hiddev_lookup_usage(hid, uref);
if (field == NULL)
return -EINVAL;
} else {
rinfo.report_type = uref.report_type;
rinfo.report_id = uref.report_id;
rinfo.report_type = uref->report_type;
rinfo.report_id = uref->report_id;
if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL)
return -EINVAL;
if (uref.field_index >= report->maxfield)
if (uref->field_index >= report->maxfield)
return -EINVAL;
field = report->field[uref.field_index];
if (uref.usage_index >= field->maxusage)
field = report->field[uref->field_index];
if (uref->usage_index >= field->maxusage)
return -EINVAL;
if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
if (uref_multi.num_values >= HID_MAX_USAGES ||
uref->usage_index >= field->maxusage ||
(uref->usage_index + uref_multi.num_values) >= field->maxusage)
return -EINVAL;
}
}
switch (cmd) {
case HIDIOCGUSAGE:
uref.value = field->value[uref.usage_index];
if (copy_to_user((void *) arg, &uref, sizeof(uref)))
uref->value = field->value[uref->usage_index];
if (copy_to_user((void *) arg, uref, sizeof(*uref)))
return -EFAULT;
return 0;
case HIDIOCSUSAGE:
field->value[uref.usage_index] = uref.value;
field->value[uref->usage_index] = uref->value;
return 0;
case HIDIOCGCOLLECTIONINDEX:
return field->usage[uref.usage_index].collection_index;
return field->usage[uref->usage_index].collection_index;
case HIDIOCGUSAGES:
for (i = 0; i < uref_multi.num_values; i++)
uref_multi.values[i] =
field->value[uref->usage_index + i];
if (copy_to_user((void *) arg, &uref_multi,
sizeof(uref_multi)))
return -EFAULT;
return 0;
case HIDIOCSUSAGES:
for (i = 0; i < uref_multi.num_values; i++)
field->value[uref->usage_index + i] =
uref_multi.values[i];
return 0;
}
return 0;
......
/*
* USB Wacom Graphire and Wacom Intuos tablet support
*
* Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
* Copyright (c) 2000-2004 Vojtech Pavlik <vojtech@ucw.cz>
* Copyright (c) 2000 Andreas Bach Aaen <abach@stofanet.dk>
* Copyright (c) 2000 Clifford Wolf <clifford@clifford.at>
* Copyright (c) 2000 Sam Mosel <sam.mosel@computer.org>
......@@ -9,6 +9,7 @@
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2002 Ping Cheng <pingc@wacom.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
*
* ChangeLog:
* v0.1 (vp) - Initial release
......@@ -48,6 +49,7 @@
* v1.30 (vp) - Merge 2.4 and 2.5 drivers
* - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
* - Cleanups here and there
* v1.30.1 (pi) - Added Graphire3 support
*/
/*
......
......@@ -39,33 +39,33 @@ struct hiddev_event {
};
struct hiddev_devinfo {
unsigned int bustype;
unsigned int busnum;
unsigned int devnum;
unsigned int ifnum;
short vendor;
short product;
short version;
unsigned num_applications;
__u32 bustype;
__u32 busnum;
__u32 devnum;
__u32 ifnum;
__s16 vendor;
__s16 product;
__s16 version;
__u32 num_applications;
};
struct hiddev_collection_info {
unsigned index;
unsigned type;
unsigned usage;
unsigned level;
__u32 index;
__u32 type;
__u32 usage;
__u32 level;
};
#define HID_STRING_SIZE 256
struct hiddev_string_descriptor {
int index;
__s32 index;
char value[HID_STRING_SIZE];
};
struct hiddev_report_info {
unsigned report_type;
unsigned report_id;
unsigned num_fields;
__u32 report_type;
__u32 report_id;
__u32 num_fields;
};
/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and
......@@ -88,20 +88,20 @@ struct hiddev_report_info {
#define HID_REPORT_TYPE_MAX 3
struct hiddev_field_info {
unsigned report_type;
unsigned report_id;
unsigned field_index;
unsigned maxusage;
unsigned flags;
unsigned physical; /* physical usage for this field */
unsigned logical; /* logical usage for this field */
unsigned application; /* application usage for this field */
__u32 report_type;
__u32 report_id;
__u32 field_index;
__u32 maxusage;
__u32 flags;
__u32 physical; /* physical usage for this field */
__u32 logical; /* logical usage for this field */
__u32 application; /* application usage for this field */
__s32 logical_minimum;
__s32 logical_maximum;
__s32 physical_minimum;
__s32 physical_maximum;
unsigned unit_exponent;
unsigned unit;
__u32 unit_exponent;
__u32 unit;
};
/* Fill in report_type, report_id and field_index to get the information on a
......@@ -118,14 +118,22 @@ struct hiddev_field_info {
#define HID_FIELD_BUFFERED_BYTE 0x100
struct hiddev_usage_ref {
unsigned report_type;
unsigned report_id;
unsigned field_index;
unsigned usage_index;
unsigned usage_code;
__u32 report_type;
__u32 report_id;
__u32 field_index;
__u32 usage_index;
__u32 usage_code;
__s32 value;
};
/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
* It really manifests itself as setting the value of consecutive usages */
struct hiddev_usage_ref_multi {
struct hiddev_usage_ref uref;
__u32 num_values;
__s32 values[HID_MAX_USAGES];
};
/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
* is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
* been sent by the device
......@@ -161,6 +169,10 @@ struct hiddev_usage_ref {
#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info)
#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len)
/* For writing/reading to multiple/consecutive usages */
#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi)
#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi)
/*
* Flags to be used in HIDIOCSFLAG
*/
......
......@@ -3,7 +3,6 @@
#include <linux/module.h>
#include <linux/major.h>
#define BUSMOUSE_MINOR 0
#define PSMOUSE_MINOR 1
#define MS_BUSMOUSE_MINOR 2
#define ATIXL_BUSMOUSE_MINOR 3
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment