Commit 0a6ef376 authored by Sam Ravnborg's avatar Sam Ravnborg Committed by Ingo Molnar

x86: unification of arch/x86/Makefiles

Unify the 32 and 64 bit specific Makefiles.
The unification was simplest to do in one step although the
readability of the patch suffers a bit from this.

Noteworthy remarks on the unification:
- The 64 bit cpu stuff should be moved to Makefile_32.cpu
  but I did not feel confident doing it due to subtle differences
- The use of cflags-y were abandoned since we have seen one bug where
  we did wrong due to missing assignment to KBUILD_CFLAGS.
  The cc-option marcro uses KBUILD_CFLAGS.
- The "No need to remake" line are deleted. It caused "make -B" to fail
- For 64 bit the sub architecture stuff is not used.
- The way head64.o is specified could be nicer - but it awaits the
  introduction of head32.o (which seems like a win to introduce for readability)
- Patch is checkpatch clean

Patch is tested by doing a defconfig build for i386 and x86_64 and in both
cases monitoring that only relevant files were recompiled when applying
the patch.

[ mingo@elte.hu: build fix ]
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent b9760156
......@@ -7,13 +7,242 @@ else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
# No need to remake these files
$(srctree)/arch/x86/Makefile%: ;
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
export BITS
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
include $(srctree)/arch/x86/Makefile_32
HAS_BIARCH := $(call cc-option-yn, -m32)
ifeq ($(HAS_BIARCH),y)
AS := $(AS) --32
LD := $(LD) -m elf_i386
CC := $(CC) -m32
endif
ifdef CONFIG_RELOCATABLE
LDFLAGS_vmlinux := --emit-relocs
endif
CHECKFLAGS += -D__i386__
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
# prevent gcc from keeping the stack 16 byte aligned
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
echo $(call cc-option,-fno-unit-at-a-time); fi ;)
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
KBUILD_CFLAGS += $(cflags-y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
else
BITS := 64
UTS_MACHINE := x86_64
include $(srctree)/arch/x86/Makefile_64
CHECKFLAGS += -D__x86_64__ -m64
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mno-red-zone
KBUILD_CFLAGS += -mcmodel=kernel
KBUILD_CFLAGS += -Wno-sign-compare
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
# prevent gcc from generating any FP code by mistake
KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
KBUILD_CFLAGS += -maccumulate-outgoing-args
stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
"$(CC)" -fstack-protector )
stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
"$(CC)" -fstack-protector-all )
KBUILD_CFLAGS += $(stackp-y)
endif
# Stackpointer is addressed different for 32 bit and 64 bit x86
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
# do binutils support CFI?
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
# is .cfi_signal_frame supported too?
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
LDFLAGS := -m elf_$(UTS_MACHINE)
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
KBUILD_CFLAGS += -pipe
###
# Sub architecture support
# fcore-y is linked before mcore-y files.
# Default subarch .c files
mcore-y := arch/x86/mach-default/
# Voyager subarch support
mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/
# VISWS subarch support
mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/
# NUMAQ subarch support
mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default/
# BIGSMP subarch support
mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default/
#Summit subarch support
mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default/
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/
# ES7000 subarch support
mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
fcore-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default/
# default subarch .h files
mflags-y += -Iinclude/asm-x86/mach-default
# 64 bit does not support subarch support - clear sub arch variables
fcore-$(CONFIG_X86_64) :=
mcore-$(CONFIG_X86_64) :=
mflags-$(CONFIG_X86_64) :=
KBUILD_CFLAGS += $(mflags-y)
KBUILD_AFLAGS += $(mflags-y)
###
# Kernel objects
head-y := arch/x86/kernel/head_$(BITS).o
head-$(CONFIG_X86_64) += arch/x86/kernel/head64.o
head-y += arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
# Sub architecture files that needs linking first
core-y += $(fcore-y)
# Xen paravirtualization support
core-$(CONFIG_XEN) += arch/x86/xen/
# lguest paravirtualization support
core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
core-y += arch/x86/kernel/
core-y += arch/x86/mm/
# Remaining sub architecture files
core-y += $(mcore-y)
core-y += arch/x86/crypto/
core-y += arch/x86/vdso/
core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
ifeq ($(CONFIG_X86_32),y)
drivers-$(CONFIG_PM) += arch/x86/power/
drivers-$(CONFIG_FB) += arch/x86/video/
endif
####
# boot loader support. Several targets are kept for legacy purposes
boot := arch/x86/boot
PHONY += zImage bzImage compressed zlilo bzlilo \
zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
zImage bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage
compressed: zImage
zlilo bzlilo: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
zdisk bzdisk: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
install: vdso_install
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' bzdisk - Create a boot floppy in /dev/fd0'
echo ' fdimage - Create a boot floppy image'
echo ' isoimage - Create a boot CD-ROM image'
endef
CLEAN_FILES += arch/x86/boot/fdimage \
arch/x86/boot/image.iso \
arch/x86/boot/mtools.conf
#
# i386 Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" cleaning up for this architecture.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
#
# 19990713 Artur Skawina <skawina@geocities.com>
# Added '-march' and '-mpreferred-stack-boundary' support
#
# 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net>
# Added support for GEODE CPU
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
BITS := 32
export BITS
HAS_BIARCH := $(call cc-option-yn, -m32)
ifeq ($(HAS_BIARCH),y)
AS := $(AS) --32
LD := $(LD) -m elf_i386
CC := $(CC) -m32
endif
LDFLAGS := -m elf_i386
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
ifdef CONFIG_RELOCATABLE
LDFLAGS_vmlinux := --emit-relocs
endif
CHECKFLAGS += -D__i386__
KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return
# prevent gcc from keeping the stack 16 byte aligned
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
# temporary until string.h is fixed
cflags-y += -ffreestanding
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
# do binutils support CFI?
cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
# is .cfi_signal_frame supported too?
cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
KBUILD_CFLAGS += $(cflags-y)
# Default subarch .c files
mcore-y := arch/x86/mach-default
# Voyager subarch support
mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager
# VISWS subarch support
mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws
# NUMAQ subarch support
mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default
# BIGSMP subarch support
mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default
#Summit subarch support
mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic
mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
# ES7000 subarch support
mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
# Xen paravirtualization support
core-$(CONFIG_XEN) += arch/x86/xen/
# lguest paravirtualization support
core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
# default subarch .h files
mflags-y += -Iinclude/asm-x86/mach-default
head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
core-y += arch/x86/kernel/ \
arch/x86/mm/ \
$(mcore-y)/ \
arch/x86/crypto/ \
arch/x86/vdso/
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
drivers-$(CONFIG_PM) += arch/x86/power/
drivers-$(CONFIG_FB) += arch/x86/video/
KBUILD_CFLAGS += $(mflags-y)
KBUILD_AFLAGS += $(mflags-y)
boot := arch/x86/boot
PHONY += zImage bzImage compressed zlilo bzlilo \
zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
zImage bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/i386/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage
compressed: zImage
zlilo bzlilo: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
zdisk bzdisk: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
install: vdso_install
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=arch/x86/boot
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' bzdisk - Create a boot floppy in /dev/fd0'
echo ' fdimage - Create a boot floppy image'
echo ' isoimage - Create a boot CD-ROM image'
endef
CLEAN_FILES += arch/x86/boot/fdimage \
arch/x86/boot/image.iso \
arch/x86/boot/mtools.conf
#
# x86_64 Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
#
# 19990713 Artur Skawina <skawina@geocities.com>
# Added '-march' and '-mpreferred-stack-boundary' support
# 20000913 Pavel Machek <pavel@suse.cz>
# Converted for x86_64 architecture
# 20010105 Andi Kleen, add IA32 compiler.
# ....and later removed it again....
#
# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
BITS := 64
export BITS
LDFLAGS := -m elf_x86_64
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
LDFLAGS_vmlinux :=
CHECKFLAGS += -D__x86_64__ -m64
cflags-y :=
cflags-kernel-y :=
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
# gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it
# will eventually. Use -mtune=generic as fallback
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
cflags-y += -m64
cflags-y += -mno-red-zone
cflags-y += -mcmodel=kernel
cflags-y += -pipe
cflags-y += -Wno-sign-compare
cflags-y += -fno-asynchronous-unwind-tables
ifneq ($(CONFIG_DEBUG_INFO),y)
# -fweb shrinks the kernel a bit, but the difference is very small
# it also messes up debugging, so don't use it for now.
#cflags-y += $(call cc-option,-fweb)
endif
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
cflags-y += $(call cc-option,-funit-at-a-time)
# prevent gcc from generating any FP code by mistake
cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
cflags-y += -maccumulate-outgoing-args
# do binutils support CFI?
cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
# is .cfi_signal_frame supported too?
cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector )
cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all )
KBUILD_CFLAGS += $(cflags-y)
CFLAGS_KERNEL += $(cflags-kernel-y)
KBUILD_AFLAGS += -m64
head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
core-y += arch/x86/kernel/ \
arch/x86/mm/ \
arch/x86/crypto/ \
arch/x86/vdso/
core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
drivers-$(CONFIG_PCI) += arch/x86/pci/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
boot := arch/x86/boot
PHONY += bzImage bzlilo install archmrproper \
fdimage fdimage144 fdimage288 isoimage archclean
#Default target when executing "make"
all: bzImage
BOOTIMAGE := arch/x86/boot/bzImage
KBUILD_IMAGE := $(BOOTIMAGE)
bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE)
$(Q)mkdir -p $(objtree)/arch/x86_64/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage
bzlilo: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo
bzdisk: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk
fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
install: vdso_install
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/installkernel or'
echo ' (distribution) /sbin/installkernel or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' bzdisk - Create a boot floppy in /dev/fd0'
echo ' fdimage - Create a boot floppy image'
echo ' isoimage - Create a boot CD-ROM image'
endef
CLEAN_FILES += arch/x86/boot/fdimage \
arch/x86/boot/image.iso \
arch/x86/boot/mtools.conf
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment