Commit 0ac225e5 authored by Keith Packard's avatar Keith Packard

Merge branch 'drm-intel-fixes' into drm-intel-next

parents 64a742fa cd0de039
......@@ -67,11 +67,11 @@ module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6 (default: true)");
unsigned int i915_enable_fbc __read_mostly = 1;
unsigned int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
MODULE_PARM_DESC(i915_enable_fbc,
"Enable frame buffer compression for power savings "
"(default: false)");
"(default: -1 (use per-chip default))");
unsigned int i915_lvds_downclock __read_mostly = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
......
......@@ -1800,6 +1800,7 @@ static void intel_update_fbc(struct drm_device *dev)
struct drm_framebuffer *fb;
struct intel_framebuffer *intel_fb;
struct drm_i915_gem_object *obj;
int enable_fbc;
DRM_DEBUG_KMS("\n");
......@@ -1840,8 +1841,15 @@ static void intel_update_fbc(struct drm_device *dev)
intel_fb = to_intel_framebuffer(fb);
obj = intel_fb->obj;
if (!i915_enable_fbc) {
DRM_DEBUG_KMS("fbc disabled per module param (default off)\n");
enable_fbc = i915_enable_fbc;
if (enable_fbc < 0) {
DRM_DEBUG_KMS("fbc set to per-chip default\n");
enable_fbc = 1;
if (INTEL_INFO(dev)->gen <= 5)
enable_fbc = 0;
}
if (!enable_fbc) {
DRM_DEBUG_KMS("fbc disabled per module param\n");
dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
goto out_disable;
}
......
......@@ -337,9 +337,6 @@ extern void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
struct drm_connector *connector,
struct intel_load_detect_pipe *old);
extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
......
......@@ -92,6 +92,11 @@ struct intel_sdvo {
*/
uint16_t attached_output;
/*
* Hotplug activation bits for this device
*/
uint8_t hotplug_active[2];
/**
* This is used to select the color range of RBG outputs in HDMI mode.
* It is only valid when using TMDS encoding and 8 bit per color mode.
......@@ -1208,74 +1213,20 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in
return true;
}
/* No use! */
#if 0
struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
{
struct drm_connector *connector = NULL;
struct intel_sdvo *iout = NULL;
struct intel_sdvo *sdvo;
/* find the sdvo connector */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
iout = to_intel_sdvo(connector);
if (iout->type != INTEL_OUTPUT_SDVO)
continue;
sdvo = iout->dev_priv;
if (sdvo->sdvo_reg == SDVOB && sdvoB)
return connector;
if (sdvo->sdvo_reg == SDVOC && !sdvoB)
return connector;
}
return NULL;
}
int intel_sdvo_supports_hotplug(struct drm_connector *connector)
static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
{
u8 response[2];
u8 status;
struct intel_sdvo *intel_sdvo;
DRM_DEBUG_KMS("\n");
if (!connector)
return 0;
intel_sdvo = to_intel_sdvo(connector);
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
&response, 2) && response[0];
}
void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
{
u8 response[2];
u8 status;
struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
intel_sdvo_read_response(intel_sdvo, &response, 2);
if (on) {
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
status = intel_sdvo_read_response(intel_sdvo, &response, 2);
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
} else {
response[0] = 0;
response[1] = 0;
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
}
struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
intel_sdvo_read_response(intel_sdvo, &response, 2);
intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
}
#endif
static bool
intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
......@@ -2045,6 +1996,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
{
struct drm_encoder *encoder = &intel_sdvo->base.base;
struct drm_connector *connector;
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
struct intel_connector *intel_connector;
struct intel_sdvo_connector *intel_sdvo_connector;
......@@ -2062,7 +2014,17 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
connector->polled = DRM_CONNECTOR_POLL_HPD;
intel_sdvo->hotplug_active[0] |= 1 << device;
/* Some SDVO devices have one-shot hotplug interrupts.
* Ensure that they get re-enabled when an interrupt happens.
*/
intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
intel_sdvo_enable_hotplug(intel_encoder);
}
else
connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
......@@ -2569,6 +2531,14 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
/* Set up hotplug command - note paranoia about contents of reply.
* We assume that the hardware is in a sane state, and only touch
* the bits we think we understand.
*/
intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
&intel_sdvo->hotplug_active, 2);
intel_sdvo->hotplug_active[0] &= ~0x3;
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment