Commit 0ac247d5 authored by Wade Farnsworth's avatar Wade Farnsworth Committed by Kumar Gala

[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dts

Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts

Also add compatible field for the soc node, so that it will be picked up
by of_platform_bus_probe().
Signed-off-by: default avatarWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent de7566bf
......@@ -60,10 +60,52 @@ memory {
reg = <00000000 40000000>; // 1G at 0x0
};
localbus@f8005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <f8005000 1000>;
interrupts = <13 2>;
interrupt-parent = <&mpic>;
ranges = <0 0 ff800000 00800000
1 0 fe000000 01000000
2 0 f8200000 00100000
3 0 f8100000 00100000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 00800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <00000000 00300000>;
};
partition@300000 {
label = "firmware b";
reg = <00300000 00100000>;
read-only;
};
partition@400000 {
label = "fs";
reg = <00400000 00300000>;
};
partition@700000 {
label = "firmware a";
reg = <00700000 00100000>;
read-only;
};
};
};
soc8641@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <00000000 f8000000 00100000>;
reg = <f8000000 00001000>; // CCSRBAR
bus-frequency = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment