sh: Add sh7269 device

This is an sh2a device (max 266MHz) with FPU, video display
controller (VDC), 8 serial ports, 4 I2C channels, 3 CAN ports,
SD and on-chip USB.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -295,6 +295,13 @@ config CPU_SUBTYPE_SH7264
 	select SYS_SUPPORTS_CMT
 	select SYS_SUPPORTS_MTU2
 
+config CPU_SUBTYPE_SH7269
+	bool "Support SH7269 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_MTU2
+
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
 	select CPU_SH2A
@@ -592,7 +599,7 @@ config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
 		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
-		      !CPU_SUBTYPE_SH7264
+		      !CPU_SUBTYPE_SH7264 && !CPU_SUBTYPE_SH7269
 
 source "kernel/time/Kconfig"
 

arch/sh/include/asm/processor.h

@@ -18,7 +18,8 @@ enum cpu_type {
 	CPU_SH7619,
 
 	/* SH-2A types */
-	CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_MXG,
+	CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
+	CPU_MXG,
 
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,

arch/sh/kernel/cpu/proc.c

@@ -7,7 +7,7 @@
 static const char *cpu_name[] = {
 	[CPU_SH7201]	= "SH7201",
 	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
-	[CPU_SH7264]	= "SH7264",
+	[CPU_SH7264]	= "SH7264",	[CPU_SH7269]	= "SH7269",
 	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",

arch/sh/kernel/cpu/sh2a/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7264)	+= setup-sh7264.o clock-sh7264.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7269)	+= setup-sh7269.o clock-sh7269.o
 obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
 
 # Pinmux setup

arch/sh/kernel/cpu/sh2a/clock-sh7269.c

+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+ *
+ * SH7269 clock framework support
+ *
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+/* SH7269 registers */
+#define FRQCR		0xfffe0010
+#define STBCR3 		0xfffe0408
+#define STBCR4 		0xfffe040c
+#define STBCR5 		0xfffe0410
+#define STBCR6 		0xfffe0414
+#define STBCR7 		0xfffe0418
+
+#define PLL_RATE 20
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13340000,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 8;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 4;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 2, 0, 4 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_B,
+       DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+	[DIV4_B]  = DIV4(FRQCR, 4, 0xA, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP72,
+	MSTP60,
+	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP35, MSTP32, MSTP30,
+	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP72] = SH_CLK_MSTP8(&peripheral0_clk, STBCR7, 2, 0), /* CMT */
+	[MSTP60] = SH_CLK_MSTP8(&peripheral1_clk, STBCR6, 0, 0), /* USB */
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP35] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 5, 0), /* MTU2 */
+	[MSTP32] = SH_CLK_MSTP8(&peripheral1_clk, STBCR3, 2, 0), /* ADC */
+	[MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP72]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
+	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP35]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}

arch/sh/kernel/cpu/sh2a/probe.c

@@ -32,6 +32,9 @@ void __cpuinit cpu_probe(void)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7264)
 	boot_cpu_data.type			= CPU_SH7264;
 	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7269)
+	boot_cpu_data.type			= CPU_SH7269;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
 #elif defined(CONFIG_CPU_SUBTYPE_SH7206)
 	boot_cpu_data.type			= CPU_SH7206;
 	boot_cpu_data.flags			|= CPU_HAS_DSP;