Commit 0b34e320 authored by Miquel Raynal's avatar Miquel Raynal

Merge tag 'memory-controller-drv-pl353-5.14' into nand/next

Memory controller drivers for v5.14 - PL353

Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.

This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
parents c374839f d3d0e1e8
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM PL353 Static Memory Controller (SMC) device-tree bindings
maintainers:
- Miquel Raynal <miquel.raynal@bootlin.com>
- Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
description:
The PL353 Static Memory Controller is a bus where you can connect two kinds
of memory interfaces, which are NAND and memory mapped interfaces (such as
SRAM or NOR).
# We need a select here so we don't match all nodes with 'arm,primecell'
select:
properties:
compatible:
contains:
const: arm,pl353-smc-r2p1
required:
- compatible
properties:
$nodename:
pattern: "^memory-controller@[0-9a-f]+$"
compatible:
items:
- const: arm,pl353-smc-r2p1
- const: arm,primecell
"#address-cells":
const: 2
"#size-cells":
const: 1
reg:
items:
- description:
Configuration registers for the host and sub-controllers.
The three chip select regions are defined in 'ranges'.
clocks:
items:
- description: clock for the memory device bus
- description: main clock of the SMC
clock-names:
items:
- const: memclk
- const: apb_pclk
ranges:
minItems: 1
maxItems: 3
description: |
Memory bus areas for interacting with the devices. Reflects
the memory layout with four integer values following:
<cs-number> 0 <offset> <size>
items:
- description: NAND bank 0
- description: NOR/SRAM bank 0
- description: NOR/SRAM bank 1
interrupts: true
patternProperties:
"@[0-3],[a-f0-9]+$":
type: object
description: |
The child device node represents the controller connected to the SMC
bus. The controller can be a NAND controller or a pair of any memory
mapped controllers such as NOR and SRAM controllers.
properties:
compatible:
description:
Compatible of memory controller.
reg:
items:
- items:
- description: |
Chip-select ID, as in the parent range property.
minimum: 0
maximum: 2
- description: |
Offset of the memory region requested by the device.
- description: |
Length of the memory region requested by the device.
required:
- compatible
- reg
required:
- compatible
- reg
- clock-names
- clocks
- "#address-cells"
- "#size-cells"
- ranges
additionalProperties: false
examples:
- |
smcc: memory-controller@e000e000 {
compatible = "arm,pl353-smc-r2p1", "arm,primecell";
reg = <0xe000e000 0x0001000>;
clock-names = "memclk", "apb_pclk";
clocks = <&clkc 11>, <&clkc 44>;
ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
#address-cells = <2>;
#size-cells = <1>;
nfc0: nand-controller@0,0 {
compatible = "arm,pl353-nand-r2p1";
reg = <0 0 0x1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
Device tree bindings for ARM PL353 static memory controller
PL353 static memory controller supports two kinds of memory
interfaces.i.e NAND and SRAM/NOR interfaces.
The actual devices are instantiated from the child nodes of pl353 smc node.
Required properties:
- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell".
- reg : Controller registers map and length.
- clock-names : List of input clock names - "memclk", "apb_pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
- address-cells : Must be 2.
- size-cells : Must be 1.
Child nodes:
For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
supported as child nodes.
for NAND partition information please refer the below file
Documentation/devicetree/bindings/mtd/partition.txt
Example:
smcc: memory-controller@e000e000
compatible = "arm,pl353-smc-r2p1", "arm,primecell";
clock-names = "memclk", "apb_pclk";
clocks = <&clkc 11>, <&clkc 44>;
reg = <0xe000e000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region
0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region
0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region
nand_0: flash@e1000000 {
compatible = "arm,pl353-nand-r2p1"
reg = <0 0 0x1000000>;
(...)
};
nor0: flash@e2000000 {
compatible = "cfi-flash";
reg = <1 0 0x2000000>;
};
nor1: flash@e4000000 {
compatible = "cfi-flash";
reg = <2 0 0x2000000>;
};
};
...@@ -1453,6 +1453,14 @@ S: Odd Fixes ...@@ -1453,6 +1453,14 @@ S: Odd Fixes
F: drivers/amba/ F: drivers/amba/
F: include/linux/amba/bus.h F: include/linux/amba/bus.h
ARM PRIMECELL PL35X SMC DRIVER
M: Miquel Raynal <miquel.raynal@bootlin.com@bootlin.com>
M: Naga Sureshkumar Relli <nagasure@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/mtd/arm,pl353-smc.yaml
F: drivers/memory/pl353-smc.c
ARM PRIMECELL CLCD PL110 DRIVER ARM PRIMECELL CLCD PL110 DRIVER
M: Russell King <linux@armlinux.org.uk> M: Russell King <linux@armlinux.org.uk>
S: Odd Fixes S: Odd Fixes
......
This diff is collapsed.
/* SPDX-License-Identifier: GPL-2.0 */
/*
* ARM PL353 SMC Driver Header
*
* Copyright (C) 2012 - 2018 Xilinx, Inc
*/
#ifndef __LINUX_PL353_SMC_H
#define __LINUX_PL353_SMC_H
enum pl353_smc_ecc_mode {
PL353_SMC_ECCMODE_BYPASS = 0,
PL353_SMC_ECCMODE_APB = 1,
PL353_SMC_ECCMODE_MEM = 2
};
enum pl353_smc_mem_width {
PL353_SMC_MEM_WIDTH_8 = 0,
PL353_SMC_MEM_WIDTH_16 = 1
};
u32 pl353_smc_get_ecc_val(int ecc_reg);
bool pl353_smc_ecc_is_busy(void);
int pl353_smc_get_nand_int_status_raw(void);
void pl353_smc_clr_nand_int(void);
int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode);
int pl353_smc_set_ecc_pg_size(unsigned int pg_sz);
int pl353_smc_set_buswidth(unsigned int bw);
void pl353_smc_set_cycles(u32 timings[]);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment