iio: adc: stm32: remove const channel names definition

Remove const array that defines channels. Build channels definition
at probe time, when initializing channels (only for requested ones).
This will ease adding differential channels support.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/adc/stm32-adc.c

@@ -153,6 +153,8 @@ enum stm32h7_adc_dmngt {
 /* BOOST bit must be set on STM32H7 when ADC clock is above 20MHz */
 #define STM32H7_BOOST_CLKRATE		20000000UL
 
+#define STM32_ADC_CH_MAX		20	/* max number of channels */
+#define STM32_ADC_CH_SZ			5	/* max channel name size */
 #define STM32_ADC_MAX_SQ		16	/* SQ1..SQ16 */
 #define STM32_ADC_MAX_SMP		7	/* SMPx range is [0..7] */
 #define STM32_ADC_TIMEOUT_US		100000
@@ -300,6 +302,7 @@ struct stm32_adc_cfg {
  * @pcsel		bitmask to preselect channels on some devices
  * @smpr_val:		sampling time settings (e.g. smpr1 / smpr2)
  * @cal:		optional calibration data on some devices
+ * @chan_name:		channel name array
  */
 struct stm32_adc {
 	struct stm32_adc_common	*common;
@@ -321,69 +324,28 @@ struct stm32_adc {
 	u32			pcsel;
 	u32			smpr_val[2];
 	struct stm32_adc_calib	cal;
-};
-
-/**
- * struct stm32_adc_chan_spec - specification of stm32 adc channel
- * @type:	IIO channel type
- * @channel:	channel number (single ended)
- * @name:	channel name (single ended)
- */
-struct stm32_adc_chan_spec {
-	enum iio_chan_type	type;
-	int			channel;
-	const char		*name;
+	char			chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ];
 };
 
 /**
  * struct stm32_adc_info - stm32 ADC, per instance config data
- * @channels:		Reference to stm32 channels spec
  * @max_channels:	Number of channels
  * @resolutions:	available resolutions
  * @num_res:		number of available resolutions
  */
 struct stm32_adc_info {
-	const struct stm32_adc_chan_spec *channels;
 	int max_channels;
 	const unsigned int *resolutions;
 	const unsigned int num_res;
 };
 
-/*
- * Input definitions common for all instances:
- * stm32f4 can have up to 16 channels
- * stm32h7 can have up to 20 channels
- */
-static const struct stm32_adc_chan_spec stm32_adc_channels[] = {
-	{ IIO_VOLTAGE, 0, "in0" },
-	{ IIO_VOLTAGE, 1, "in1" },
-	{ IIO_VOLTAGE, 2, "in2" },
-	{ IIO_VOLTAGE, 3, "in3" },
-	{ IIO_VOLTAGE, 4, "in4" },
-	{ IIO_VOLTAGE, 5, "in5" },
-	{ IIO_VOLTAGE, 6, "in6" },
-	{ IIO_VOLTAGE, 7, "in7" },
-	{ IIO_VOLTAGE, 8, "in8" },
-	{ IIO_VOLTAGE, 9, "in9" },
-	{ IIO_VOLTAGE, 10, "in10" },
-	{ IIO_VOLTAGE, 11, "in11" },
-	{ IIO_VOLTAGE, 12, "in12" },
-	{ IIO_VOLTAGE, 13, "in13" },
-	{ IIO_VOLTAGE, 14, "in14" },
-	{ IIO_VOLTAGE, 15, "in15" },
-	{ IIO_VOLTAGE, 16, "in16" },
-	{ IIO_VOLTAGE, 17, "in17" },
-	{ IIO_VOLTAGE, 18, "in18" },
-	{ IIO_VOLTAGE, 19, "in19" },
-};
-
 static const unsigned int stm32f4_adc_resolutions[] = {
 	/* sorted values so the index matches RES[1:0] in STM32F4_ADC_CR1 */
 	12, 10, 8, 6,
 };
 
+/* stm32f4 can have up to 16 channels */
 static const struct stm32_adc_info stm32f4_adc_info = {
-	.channels = stm32_adc_channels,
 	.max_channels = 16,
 	.resolutions = stm32f4_adc_resolutions,
 	.num_res = ARRAY_SIZE(stm32f4_adc_resolutions),
@@ -394,9 +356,9 @@ static const unsigned int stm32h7_adc_resolutions[] = {
 	16, 14, 12, 10, 8,
 };
 
+/* stm32h7 can have up to 20 channels */
 static const struct stm32_adc_info stm32h7_adc_info = {
-	.channels = stm32_adc_channels,
-	.max_channels = 20,
+	.max_channels = STM32_ADC_CH_MAX,
 	.resolutions = stm32h7_adc_resolutions,
 	.num_res = ARRAY_SIZE(stm32h7_adc_resolutions),
 };
@@ -1628,15 +1590,16 @@ static void stm32_adc_smpr_init(struct stm32_adc *adc, int channel, u32 smp_ns)
 }
 
 static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
-				    struct iio_chan_spec *chan,
-				    const struct stm32_adc_chan_spec *channel,
+				    struct iio_chan_spec *chan, u32 vinp,
 				    int scan_index, u32 smp)
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
+	char *name = adc->chan_name[vinp];
 
-	chan->type = channel->type;
-	chan->channel = channel->channel;
-	chan->datasheet_name = channel->name;
+	chan->type = IIO_VOLTAGE;
+	chan->channel = vinp;
+	snprintf(name, STM32_ADC_CH_SZ, "in%d", vinp);
+	chan->datasheet_name = name;
 	chan->scan_index = scan_index;
 	chan->indexed = 1;
 	chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
@@ -1699,8 +1662,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
 					   scan_index, &smp);
 
 		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
-					&adc_info->channels[val],
-					scan_index, smp);
+					val, scan_index, smp);
 		scan_index++;
 	}