arm64: dts: qcom: sc7280: Use WPSS PAS instead of PIL

The wpss-pil driver wants to manage too many resources that cannot be
touched with standard Qualcomm firmware.

Use the compatible from the PAS driver and move the ChromeOS-specific
bits to sc7280-chrome-common.dtsi.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-7-6aa394d33edf@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi

@@ -97,8 +97,25 @@ spi_flash: flash@0 {
 };
 
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+	status = "okay";
 };
 
 &scm {

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -3594,7 +3594,7 @@ qspi: spi@88dc000 {
 		};
 
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3606,12 +3606,8 @@ remoteproc_wpss: remoteproc@8a00000 {
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3624,11 +3620,6 @@ remoteproc_wpss: remoteproc@8a00000 {
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";