platform/x86: apple-gmux: support MMIO gmux on T2 Macs
In some newer dual gpu MacBooks, the T2 Coprocessor functions as the gmux, and the Intel side can interract with this new gmux type through MMIO. Add support for these gmux controllers to the apple-gmux driver. We start using the GMSP(0) acpi method on these gmux's when clearing interrupts, as this prevents a flood of status=0 interrupts that can't be cleared. It's unknown if this helps or hinders older gmux types, so it isn't enabled for those. Interestingly, the ACPI table only allocates 8 bytes for GMUX, but we actually need 16, and as such we request 16 with request_mem_region. Reading and writing from ports: 16 bytes from 0xfe0b0200 are used. 0x0 to 0x4 are where data to read appears, and where data to write goes. Writing to 0xe sets the gmux port being accessed, and writing to 0xf sends commands. These commands are 0x40 & data_length for write, and data_length for read, where data_length is 1, 2 or 4. Once byte base+0xf is 0, the command is done. Issues: As with other retina models, we can't switch DDC lines so switching at runtime doesn't work if the inactive gpu driver already disabled eDP due to it not being connected when that driver loaded. Additionally, turning on the dgpu back on on the MacBookPro16,1 does not work. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com> Link: https://lore.kernel.org/r/20230303112842.3094-4-orlandoch.dev@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Showing
This diff is collapsed.
Please register or sign in to comment