can: ifi: Add IFI CANFD IP support

The patch adds support for IFI CAN/FD controller [1]. This driver
currently supports sending and receiving both standard CAN and new
CAN/FD frames. Both ISO and BOSCH variant of CAN/FD is supported.

[1] http://www.ifi-pld.de/IP/CANFD/canfd.htmlSigned-off-by: Marek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/Kconfig

@@ -149,6 +149,7 @@ config PCH_CAN
 
 source "drivers/net/can/c_can/Kconfig"
 source "drivers/net/can/cc770/Kconfig"
+source "drivers/net/can/ifi_canfd/Kconfig"
 source "drivers/net/can/m_can/Kconfig"
 source "drivers/net/can/mscan/Kconfig"
 source "drivers/net/can/sja1000/Kconfig"

drivers/net/can/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_CAN_CC770)		+= cc770/
 obj-$(CONFIG_CAN_C_CAN)		+= c_can/
 obj-$(CONFIG_CAN_FLEXCAN)	+= flexcan.o
 obj-$(CONFIG_CAN_GRCAN)		+= grcan.o
+obj-$(CONFIG_CAN_IFI_CANFD)	+= ifi_canfd/
 obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 obj-$(CONFIG_CAN_MSCAN)		+= mscan/
 obj-$(CONFIG_CAN_M_CAN)		+= m_can/

drivers/net/can/ifi_canfd/Kconfig

+config CAN_IFI_CANFD
+	depends on HAS_IOMEM
+	tristate "IFI CAN_FD IP"
+	---help---
+	  This driver adds support for the I/F/I CAN_FD soft IP block
+	  connected to the "platform bus" (Linux abstraction for directly
+	  to the processor attached devices). The CAN_FD is most often
+	  synthesised into an FPGA or CPLD.

drivers/net/can/ifi_canfd/Makefile

+#
+#  Makefile for the IFI CANFD controller driver.
+#
+
+obj-$(CONFIG_CAN_IFI_CANFD) += ifi_canfd.o