arm64: dts: qcom: qcm2290: Add USB3 PHY

Describe the USB3 PHY and hook it up to the USB3 controller.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230606-topic-qcm2290_usb3-v1-1-3e8fbcb89088@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/qcm2290.dtsi

@@ -638,6 +638,32 @@ usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,qcm2290-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -1062,8 +1088,8 @@ usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x04e00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_hsphy>;
-				phy-names = "usb2-phy";
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;