Merge tag 'actions-arm-dt-for-4.13' of...

Merge tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt

Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber:

This adds an initial DT for the S500 SoC and a devboard based on it.

* tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  ARM: dts: owl-s500: Add SPS node
  ARM: dts: owl-s500: Set CPU enable-method
  dt-bindings: arm: cpus: Add S500 enable-method
  ARM: dts: Add Actions Semi S500 and LeMaker Guitar
  dt-bindings: arm: Document Actions Semi S900
  dt-bindings: timer: Document Owl timer
  dt-bindings: arm: Document Actions Semi S500
  dt-bindings: Add vendor prefix for Actions Semi

Documentation/devicetree/bindings/arm/actions.txt

+Actions Semi platforms device tree bindings
+-------------------------------------------
+
+
+S500 SoC
+========
+
+Required root node properties:
+
+ - compatible :  must contain "actions,s500"
+
+
+Modules:
+
+Root node property compatible must contain, depending on module:
+
+ - LeMaker Guitar: "lemaker,guitar"
+
+
+Boards:
+
+Root node property compatible must contain, depending on board:
+
+ - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar"
+
+
+S900 SoC
+========
+
+Required root node properties:
+
+- compatible :  must contain "actions,s900"
+
+
+Boards:
+
+Root node property compatible must contain, depending on board:
+
+ - uCRobotics Bubblegum-96: "ucrobotics,bubblegum-96"

Documentation/devicetree/bindings/arm/cpus.txt

@@ -193,6 +193,7 @@ nodes to be present and contain the properties described below.
 			     "spin-table"
 			# On ARM 32-bit systems this property is optional and
 			  can be one of:
+			    "actions,s500-smp"
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
 			    "arm,realview-smp"

Documentation/devicetree/bindings/timer/actions,owl-timer.txt

+Actions Semi Owl Timer
+
+Required properties:
+- compatible      :  "actions,s500-timer" for S500
+                     "actions,s900-timer" for S900
+- reg             :  Offset and length of the register set for the device.
+- interrupts      :  Should contain the interrupts.
+- interrupt-names :  Valid names are: "2hz0", "2hz1",
+                                      "timer0", "timer1", "timer2", "timer3"
+                     See ../resource-names.txt
+
+Example:
+
+		timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer0", "timer1";
+		};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -5,6 +5,7 @@ using them to avoid name-space collisions.
 
 abcn	Abracon Corporation
 abilis	Abilis Systems
+actions	Actions Semiconductor Co., Ltd.
 active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH
 adapteva	Adapteva, Inc.

arch/arm/boot/dts/Makefile

@@ -669,6 +669,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-netgear-wnr854t.dtb \
 	orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-guitar-bb-rev-b.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_OXNAS) += \

arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts

+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "owl-s500-guitar.dtsi"
+
+/ {
+	compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
+	model = "LeMaker Guitar Base Board rev. B";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};

arch/arm/boot/dts/owl-s500-guitar.dtsi

+/*
+ * LeMaker Guitar SoM
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "lemaker,guitar", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};

arch/arm/boot/dts/owl-s500.dtsi

+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "actions,s500";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x2>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x3>;
+			enable-method = "actions,s500-smp";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		scu: scu@b0020000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xb0020000 0x100>;
+		};
+
+		global_timer: timer@b0020200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xb0020200 0x100>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_timer: timer@b0020600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xb0020600 0x20>;
+			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_wdt: wdt@b0020620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xb0020620 0xe0>;
+			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@b0021000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xb0021000 0x1000>,
+			      <0xb0020100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		l2: cache-controller@b0022000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0022000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			arm,tag-latency = <3 3 2>;
+			arm,data-latency = <5 3 3>;
+		};
+
+		uart0: serial@b0120000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0120000 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@b0122000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0122000 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@b0124000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0124000 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@b0128000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0128000 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@b012a000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012a000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@b012c000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012c000 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer: timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x8000>;
+			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+		};
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
+	};
+};