Staging: vt6655: Replace C99 comments with C89

Addresses the checkpatch.pl error:
ERROR: Do not use C99 // comments

Remove an unneeded comment line
Replace C99 comments with C89
Reduce multiple line comments to one line
Shorten comments over 80 line by removing blank space
Signed-off-by: Katie Dunne <kdunne@mail.ccsf.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/vt6655/srom.h

@@ -24,7 +24,6 @@
  * Author: Jerry Chen
  *
  * Date: Jan 29, 2003
- *
  */
 
 #ifndef __SROM_H__
@@ -34,56 +33,50 @@
 
 #define EEP_MAX_CONTEXT_SIZE    256
 
-#define CB_EEPROM_READBYTE_WAIT 900     //us
+#define CB_EEPROM_READBYTE_WAIT 900     /* us */
 
 #define W_MAX_I2CRETRY          0x0fff
 
-//
-// Contents in the EEPROM
-//
-#define EEP_OFS_PAR         0x00        // physical address
+/* Contents in the EEPROM */
+#define EEP_OFS_PAR         0x00        /* physical address */
 #define EEP_OFS_ANTENNA     0x16
 #define EEP_OFS_RADIOCTL    0x17
-#define EEP_OFS_RFTYPE      0x1B        // for select RF
-#define EEP_OFS_MINCHANNEL  0x1C        // Min Channel #
-#define EEP_OFS_MAXCHANNEL  0x1D        // Max Channel #
-#define EEP_OFS_SIGNATURE   0x1E        //
-#define EEP_OFS_ZONETYPE    0x1F        //
-#define EEP_OFS_RFTABLE     0x20        // RF POWER TABLE
+#define EEP_OFS_RFTYPE      0x1B        /* for select RF */
+#define EEP_OFS_MINCHANNEL  0x1C        /* Min Channel # */
+#define EEP_OFS_MAXCHANNEL  0x1D        /* Max Channel # */
+#define EEP_OFS_SIGNATURE   0x1E
+#define EEP_OFS_ZONETYPE    0x1F
+#define EEP_OFS_RFTABLE     0x20        /* RF POWER TABLE */
 #define EEP_OFS_PWR_CCK     0x20
 #define EEP_OFS_SETPT_CCK   0x21
 #define EEP_OFS_PWR_OFDMG   0x23
 #define EEP_OFS_SETPT_OFDMG 0x24
-#define EEP_OFS_PWR_FORMULA_OST  0x26   //
+#define EEP_OFS_PWR_FORMULA_OST  0x26
 #define EEP_OFS_MAJOR_VER 0x2E
 #define EEP_OFS_MINOR_VER 0x2F
 #define EEP_OFS_CCK_PWR_TBL     0x30
 #define EEP_OFS_CCK_PWR_dBm     0x3F
 #define EEP_OFS_OFDM_PWR_TBL    0x40
 #define EEP_OFS_OFDM_PWR_dBm    0x4F
-//{{ RobertYu: 20041124
+/*{{ RobertYu: 20041124 */
 #define EEP_OFS_SETPT_OFDMA         0x4E
 #define EEP_OFS_OFDMA_PWR_TBL       0x50
-//}}
+/*}}*/
 #define EEP_OFS_OFDMA_PWR_dBm       0xD2
 
-//----------need to remove --------------------
-#define EEP_OFS_BBTAB_LEN   0x70        // BB Table Length
-#define EEP_OFS_BBTAB_ADR   0x71        // BB Table Offset
-#define EEP_OFS_CHECKSUM    0xFF        // reserved area for baseband 28h ~ 78h
+/*----------need to remove --------------------*/
+#define EEP_OFS_BBTAB_LEN   0x70        /* BB Table Length */
+#define EEP_OFS_BBTAB_ADR   0x71        /* BB Table Offset */
+#define EEP_OFS_CHECKSUM    0xFF        /* reserved area for baseband 28h~78h */
 
-#define EEP_I2C_DEV_ID      0x50        // EEPROM device address on the I2C bus
+#define EEP_I2C_DEV_ID      0x50        /* EEPROM device address on I2C bus */
 
-//
-// Bits in EEP_OFS_ANTENNA
-//
+/* Bits in EEP_OFS_ANTENNA */
 #define EEP_ANTENNA_MAIN    0x01
 #define EEP_ANTENNA_AUX     0x02
 #define EEP_ANTINV          0x04
 
-//
-// Bits in EEP_OFS_RADIOCTL
-//
+/* Bits in EEP_OFS_RADIOCTL */
 #define EEP_RADIOCTL_ENABLE 0x80
 #define EEP_RADIOCTL_INV    0x01
 
@@ -103,4 +96,4 @@ void SROMvReadAllContents(void __iomem *dwIoBase, unsigned char *pbyEepromRegs);
 
 void SROMvReadEtherAddress(void __iomem *dwIoBase, unsigned char *pbyEtherAddress);
 
-#endif // __EEPROM_H__
+#endif /* __EEPROM_H__*/