Commit 0ccf8511 authored by Ansuel Smith's avatar Ansuel Smith Committed by David S. Miller

net: phy: at803x: add support for qca 8327 internal phy

Add support for qca8327 internal phy needed for correct init of the
switch port. It does use the same qca8337 function and reg just with a
different id.
Signed-off-by: default avatarAnsuel Smith <ansuelsmth@gmail.com>
Tested-by: default avatarRosen Penev <rosenp@gmail.com>
Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 32e3573f
......@@ -1420,6 +1420,19 @@ static struct phy_driver at803x_driver[] = {
.get_sset_count = at803x_get_sset_count,
.get_strings = at803x_get_strings,
.get_stats = at803x_get_stats,
}, {
/* QCA8327 */
.phy_id = QCA8327_PHY_ID,
.phy_id_mask = QCA8K_PHY_ID_MASK,
.name = "QCA PHY 8327",
/* PHY_GBIT_FEATURES */
.probe = at803x_probe,
.flags = PHY_IS_INTERNAL,
.config_init = qca83xx_config_init,
.soft_reset = genphy_soft_reset,
.get_sset_count = at803x_get_sset_count,
.get_strings = at803x_get_strings,
.get_stats = at803x_get_stats,
}, };
module_phy_driver(at803x_driver);
......@@ -1430,6 +1443,8 @@ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
{ PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) },
{ }
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment