Skip to content

L
linux
Commit 0d297df0 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

ARM: s3c: simplify platform code 

Following down the now unused symbols and header files, some additional
content can be dropped that is used by neither the s3c64xx DT support
nor the crag6410 board.
Acked-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent cc146410
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 6 additions and 2144 deletions
arch/arm/mach-s3c/Kconfig
View file @ 0d297df0
......@@ -90,36 +90,6 @@ config S3C_DEV_I2C1
help
Compile in platform device definitions for I2C channel 1
config S3C_DEV_I2C2
bool
help
Compile in platform device definitions for I2C channel 2
config S3C_DEV_I2C3
bool
help
Compile in platform device definition for I2C controller 3
config S3C_DEV_I2C4
bool
help
Compile in platform device definition for I2C controller 4
config S3C_DEV_I2C5
bool
help
Compile in platform device definition for I2C controller 5
config S3C_DEV_I2C6
bool
help
Compile in platform device definition for I2C controller 6
config S3C_DEV_I2C7
bool
help
Compile in platform device definition for I2C controller 7
config S3C_DEV_FB
bool
help
......@@ -135,26 +105,6 @@ config S3C_DEV_USB_HSOTG
help
Compile in platform device definition for USB high-speed OtG
config S3C_DEV_WDT
bool
help
Compile in platform device definition for Watchdog Timer
config S3C_DEV_NAND
bool
help
Compile in platform device definition for NAND controller
config S3C_DEV_ONENAND
bool
help
Compile in platform device definition for OneNAND controller
config S3C_DEV_RTC
bool
help
Compile in platform device definition for RTC
config S3C64XX_DEV_SPI0
bool
help
......
arch/arm/mach-s3c/Kconfig.s3c64xx
View file @ 0d297df0
......@@ -15,7 +15,6 @@ menuconfig ARCH_S3C64XX
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
select S3C_DEV_NAND if ATAGS
select S3C_GPIO_TRACK if ATAGS
select S3C2410_WATCHDOG
select SAMSUNG_ATAGS if ATAGS
......@@ -121,10 +120,8 @@ config MACH_WLF_CRAGG_6410
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
help
......
arch/arm/mach-s3c/Makefile
View file @ 0d297df0
......@@ -11,7 +11,6 @@ obj-y += init.o cpu.o
# devices
obj-$(CONFIG_SAMSUNG_ATAGS) += platformdata.o
obj-$(CONFIG_SAMSUNG_ATAGS) += devs.o
obj-$(CONFIG_SAMSUNG_ATAGS) += dev-uart.o
......@@ -21,5 +20,4 @@ obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o pm-common.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
arch/arm/mach-s3c/Makefile.s3c64xx
View file @ 0d297df0
......@@ -33,7 +33,6 @@ obj-y += dev-audio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
......
arch/arm/mach-s3c/adc-core.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Samsung ADC Controller core functions
*/
#ifndef __ASM_PLAT_ADC_CORE_H
#define __ASM_PLAT_ADC_CORE_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
*/
/* re-define device name depending on support. */
static inline void s3c_adc_setname(char *name)
{
#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
s3c_device_adc.name = name;
#endif
}
#endif /* __ASM_PLAT_ADC_CORE_H */
arch/arm/mach-s3c/ata-core-s3c64xx.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung CF-ATA Controller core functions
*/
#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
*/
/* re-define device name depending on support. */
static inline void s3c_cfcon_setname(char *name)
{
#ifdef CONFIG_SAMSUNG_DEV_IDE
s3c_device_cfcon.name = name;
#endif
}
#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
arch/arm/mach-s3c/backlight-s3c64xx.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
* @no: GPIO number for PWM timer out
* @func: Special function of GPIO line for PWM timer
*/
struct samsung_bl_gpio_info {
int no;
int func;
};
extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data);
#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
arch/arm/mach-s3c/cpu.h
View file @ 0d297df0
......@@ -16,15 +16,6 @@
extern unsigned long samsung_cpu_id;
#define S3C2410_CPU_ID 0x32410000
#define S3C2410_CPU_MASK 0xFFFFFFFF
#define S3C24XX_CPU_ID 0x32400000
#define S3C24XX_CPU_MASK 0xFFF00000
#define S3C2412_CPU_ID 0x32412000
#define S3C2412_CPU_MASK 0xFFFFF000
#define S3C6400_CPU_ID 0x36400000
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_MASK 0xFFFFF000
......@@ -38,29 +29,9 @@ static inline int is_samsung_##name(void) \
return ((samsung_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
defined(CONFIG_CPU_S3C2443)
# define soc_is_s3c24xx() is_samsung_s3c24xx()
# define soc_is_s3c2410() is_samsung_s3c2410()
#else
# define soc_is_s3c24xx() 0
# define soc_is_s3c2410() 0
#endif
#if defined(CONFIG_CPU_S3C2412)
# define soc_is_s3c2412() is_samsung_s3c2412()
#else
# define soc_is_s3c2412() 0
#endif
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
# define soc_is_s3c6400() is_samsung_s3c6400()
# define soc_is_s3c6410() is_samsung_s3c6410()
......@@ -71,12 +42,6 @@ IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
# define soc_is_s3c64xx() 0
#endif
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef KHZ
#define KHZ (1000)
#endif
#ifndef MHZ
#define MHZ (1000*1000)
#endif
......@@ -96,7 +61,6 @@ struct cpu_table {
unsigned long idmask;
void (*map_io)(void);
void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
void (*init_clocks)(int xtal);
int (*init)(void);
const char *name;
};
......@@ -105,24 +69,13 @@ extern void s3c_init_cpu(unsigned long idcode,
struct cpu_table *cpus, unsigned int cputab_size);
/* core initialisation functions */
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
extern void s3c64xx_init_cpu(void);
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
extern void s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
extern struct syscore_ops s3c244x_pm_syscore_ops;
extern struct bus_type s3c6410_subsys;
#endif
arch/arm/mach-s3c/dev-audio-s3c64xx.c
View file @ 0d297df0
......@@ -83,130 +83,3 @@ struct platform_device s3c64xx_device_iis1 = {
},
};
EXPORT_SYMBOL(s3c64xx_device_iis1);
static struct resource s3c64xx_iisv4_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
};
static struct s3c_audio_pdata i2sv4_pdata = {
.cfg_gpio = s3c64xx_i2s_cfg_gpio,
.type = {
.quirks = QUIRK_PRI_6CHAN,
},
};
struct platform_device s3c64xx_device_iisv4 = {
.name = "samsung-i2s",
.id = 2,
.num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource),
.resource = s3c64xx_iisv4_resource,
.dev = {
.platform_data = &i2sv4_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_iisv4);
/* PCM Controller platform_devices */
static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
switch (pdev->id) {
case 0:
base = S3C64XX_GPD(0);
break;
case 1:
base = S3C64XX_GPE(0);
break;
default:
printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
pdev->id);
return -EINVAL;
}
s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
return 0;
}
static struct resource s3c64xx_pcm0_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
};
static struct s3c_audio_pdata s3c_pcm0_pdata = {
.cfg_gpio = s3c64xx_pcm_cfg_gpio,
};
struct platform_device s3c64xx_device_pcm0 = {
.name = "samsung-pcm",
.id = 0,
.num_resources = ARRAY_SIZE(s3c64xx_pcm0_resource),
.resource = s3c64xx_pcm0_resource,
.dev = {
.platform_data = &s3c_pcm0_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_pcm0);
static struct resource s3c64xx_pcm1_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
};
static struct s3c_audio_pdata s3c_pcm1_pdata = {
.cfg_gpio = s3c64xx_pcm_cfg_gpio,
};
struct platform_device s3c64xx_device_pcm1 = {
.name = "samsung-pcm",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_pcm1_resource),
.resource = s3c64xx_pcm1_resource,
.dev = {
.platform_data = &s3c_pcm1_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_pcm1);
/* AC97 Controller platform devices */
static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
{
return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
}
static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
{
return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s3c64xx_ac97_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
[1] = DEFINE_RES_IRQ(IRQ_AC97),
};
static struct s3c_audio_pdata s3c_ac97_pdata = {
};
static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
struct platform_device s3c64xx_device_ac97 = {
.name = "samsung-ac97",
.id = -1,
.num_resources = ARRAY_SIZE(s3c64xx_ac97_resource),
.resource = s3c64xx_ac97_resource,
.dev = {
.platform_data = &s3c_ac97_pdata,
.dma_mask = &s3c64xx_ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
EXPORT_SYMBOL(s3c64xx_device_ac97);
void __init s3c64xx_ac97_setup_gpio(int num)
{
if (num == S3C64XX_AC97_GPD)
s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
else
s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
}
arch/arm/mach-s3c/devs.c
View file @ 0d297df0
This diff is collapsed.
arch/arm/mach-s3c/devs.h
View file @ 0d297df0
......@@ -25,60 +25,23 @@ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
extern struct platform_device s3c64xx_device_ac97;
extern struct platform_device s3c64xx_device_iis0;
extern struct platform_device s3c64xx_device_iis1;
extern struct platform_device s3c64xx_device_iisv4;
extern struct platform_device s3c64xx_device_onenand1;
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c64xx_device_spi0;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_cfcon;
extern struct platform_device s3c_device_fb;
extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
extern struct platform_device s3c_device_hsmmc3;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_i2c2;
extern struct platform_device s3c_device_i2c3;
extern struct platform_device s3c_device_i2c4;
extern struct platform_device s3c_device_i2c5;
extern struct platform_device s3c_device_i2c6;
extern struct platform_device s3c_device_i2c7;
extern struct platform_device s3c_device_iis;
extern struct platform_device s3c_device_lcd;
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_onenand;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_sdi;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
extern struct platform_device s3c_device_ts;
extern struct platform_device s3c_device_timer[];
extern struct platform_device s3c_device_usbgadget;
extern struct platform_device s3c_device_usb_hsotg;
extern struct platform_device s3c_device_usb_hsudc;
extern struct platform_device s3c_device_wdt;
extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;
extern struct platform_device samsung_device_pwm;
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
extern struct platform_device s3c_device_camif;
extern struct platform_device s3c_device_ac97;
#endif
/**
* s3c_set_platdata() - helper for setting platform data
* @pd: The default platform data for this device.
......
arch/arm/mach-s3c/dma-s3c64xx.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - DMA support
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
/* DMA0/SDMA0 */
#define DMACH_UART0 "uart0_tx"
#define DMACH_UART0_SRC2 "uart0_rx"
#define DMACH_UART1 "uart1_tx"
#define DMACH_UART1_SRC2 "uart1_rx"
#define DMACH_UART2 "uart2_tx"
#define DMACH_UART2_SRC2 "uart2_rx"
#define DMACH_UART3 "uart3_tx"
#define DMACH_UART3_SRC2 "uart3_rx"
#define DMACH_PCM0_TX "pcm0_tx"
#define DMACH_PCM0_RX "pcm0_rx"
#define DMACH_I2S0_OUT "i2s0_tx"
#define DMACH_I2S0_IN "i2s0_rx"
#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
#define DMACH_HSI_I2SV40_TX "i2s2_tx"
#define DMACH_HSI_I2SV40_RX "i2s2_rx"
/* DMA1/SDMA1 */
#define DMACH_PCM1_TX "pcm1_tx"
#define DMACH_PCM1_RX "pcm1_rx"
#define DMACH_I2S1_OUT "i2s1_tx"
#define DMACH_I2S1_IN "i2s1_rx"
#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
#define DMACH_AC97_PCMOUT "ac97_out"
#define DMACH_AC97_PCMIN "ac97_in"
#define DMACH_AC97_MICIN "ac97_mic"
#define DMACH_PWM "pwm"
#define DMACH_IRDA "irda"
#define DMACH_EXTERNAL "external"
#define DMACH_SECURITY_RX "sec_rx"
#define DMACH_SECURITY_TX "sec_tx"
enum dma_ch {
DMACH_MAX = 32
};
#include <linux/amba/pl08x.h>
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s3c/dma.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
#include "dma-s3c64xx.h"
arch/arm/mach-s3c/gpio-cfg-helpers.h
View file @ 0d297df0
......@@ -26,134 +26,10 @@ static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
return (chip->config->set_config)(chip, off, config);
}
static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
unsigned int off)
{
return (chip->config->get_config)(chip, off);
}
static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
{
return (chip->config->set_pull)(chip, off, pull);
}
static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
unsigned int off)
{
return chip->config->get_pull(chip, off);
}
/* Pull-{up,down} resistor controls.
*
* S3C2410,S3C2440 = Pull-UP,
* S3C2412,S3C2413 = Pull-Down
* S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
* S3C2443 = Pull-Both [not same as S3C6400]
*/
/**
* s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
*
* This is a helper function for the case where we have GPIOs with one
* bit configuring the presence of a pull-up resistor.
*/
extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull);
/**
* s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
* @chip: The gpio chip that is being configured
* @off: The offset for the GPIO being configured
* @param: pull: The pull mode being requested
*
* This is a helper function for the case where we have GPIOs with one
* bit configuring the presence of a pull-down resistor.
*/
extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull);
/**
* samsung_gpio_setpull_upown() - Pull configuration for choice of up,
* down or none
*
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
*
* This is a helper function for the case where we have GPIOs with two
* bits configuring the presence of a pull resistor, in the following
* order:
* 00 = No pull resistor connected
* 01 = Pull-up resistor connected
* 10 = Pull-down resistor connected
*/
extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull);
/**
* samsung_gpio_getpull_updown() - Get configuration for choice of up,
* down or none
*
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-{up,down} resistor
* for the given GPIO in the same case as samsung_gpio_setpull_upown.
*/
extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
unsigned int off);
/**
* s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-up resistor for the
* given GPIO in the same case as s3c24xx_gpio_setpull_1up.
*/
extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
unsigned int off);
/**
* s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-down resistor for the
* given GPIO in the same case as s3c24xx_gpio_setpull_1down.
*/
extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
unsigned int off);
/**
* s3c2443_gpio_setpull() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
* @off: The offset for the GPIO being configured.
* @param: pull: The pull mode being requested.
*
* This is a helper function for the case where we have GPIOs with two
* bits configuring the presence of a pull resistor, in the following
* order:
* 00 = Pull-up resistor connected
* 10 = Pull-down resistor connected
* x1 = No pull up resistor
*/
extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull);
/**
* s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
* @chip: The gpio chip that the GPIO pin belongs to.
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-{up,down} resistor for the
* given GPIO in the same case as samsung_gpio_setpull_upown.
*/
extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
unsigned int off);
#endif /* __PLAT_GPIO_CFG_HELPERS_H */
arch/arm/mach-s3c/gpio-cfg.h
View file @ 0d297df0
......@@ -94,17 +94,6 @@ struct samsung_gpio_cfg {
*/
extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
/**
* s3c_gpio_getcfg - Read the current function for a GPIO pin
* @pin: The pin to read the configuration value for.
*
* Read the configuration state of the given @pin, returning a value that
* could be passed back to s3c_gpio_cfgpin().
*
* @sa s3c_gpio_cfgpin
*/
extern unsigned s3c_gpio_getcfg(unsigned int pin);
/**
* s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
* @start: The pin number to start at
......@@ -142,14 +131,6 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
*/
extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
/**
* s3c_gpio_getpull() - get the pull resistor state of a gpio pin
* @pin: The pin number to get the settings for
*
* Read the pull resistor value for the specified pin.
*/
extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
/* configure `all` aspects of an gpio */
/**
......
arch/arm/mach-s3c/gpio-core.h
View file @ 0d297df0
......@@ -93,9 +93,6 @@ static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
*/
extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
/* exported for core SoC support to change */
extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
#ifdef CONFIG_S3C_GPIO_TRACK
extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
......
arch/arm/mach-s3c/gpio-samsung.c
View file @ 0d297df0
This diff is collapsed.
arch/arm/mach-s3c/iic-core.h
View file @ 0d297df0
......@@ -28,11 +28,4 @@ static inline void s3c_i2c1_setname(char *name)
#endif
}
static inline void s3c_i2c2_setname(char *name)
{
#ifdef CONFIG_S3C_DEV_I2C2
s3c_device_i2c2.name = name;
#endif
}
#endif /* __ASM_ARCH_IIC_H */
arch/arm/mach-s3c/init.c
View file @ 0d297df0
......@@ -63,29 +63,6 @@ void __init s3c_init_cpu(unsigned long idcode,
pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n");
}
/* s3c24xx_init_clocks
*
* Initialise the clock subsystem and associated information from the
* given master crystal value.
*
* xtal = 0 -> use default PLL crystal value (normally 12MHz)
* != 0 -> PLL crystal value in Hz
*/
void __init s3c24xx_init_clocks(int xtal)
{
if (xtal == 0)
xtal = 12*1000*1000;
if (cpu == NULL)
panic("s3c24xx_init_clocks: no cpu setup?\n");
if (cpu->init_clocks == NULL)
panic("s3c24xx_init_clocks: cpu has no clock init\n");
else
(cpu->init_clocks)(xtal);
}
/* uart management */
#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
static int nr_uarts __initdata = 0;
......@@ -150,8 +127,7 @@ static int __init s3c_arch_init(void)
int ret;
/* init is only needed for ATAGS based platforms */
if (!IS_ENABLED(CONFIG_ATAGS) ||
(!soc_is_s3c24xx() && !soc_is_s3c64xx()))
if (!IS_ENABLED(CONFIG_ATAGS))
return 0;
// do the correct init for cpu
......
arch/arm/mach-s3c/map-s3c.h
View file @ 0d297df0
......@@ -11,20 +11,6 @@
#include "map.h"
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C24XX_VA_UART S3C_VA_UART
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C24XX_VA_CLKPWR S3C_VA_SYS
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000)
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_PA_UART S3C2410_PA_UART
/*
* GPIO ports
*
......@@ -35,11 +21,6 @@
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
#define S3C2410_PA_GPIO (0x56000000)
#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
......@@ -47,24 +28,6 @@
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C2410_ADDR(x) S3C_ADDR(x)
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412)
#ifndef __ASSEMBLY__
extern void __iomem *s3c24xx_va_gpio2;
#endif
#ifdef CONFIG_CPU_S3C2412_ONLY
#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
#else
#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
#endif
#else
#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
#include "map-s5p.h"
#endif /* __ASM_PLAT_MAP_S3C_H */
arch/arm/mach-s3c/onenand-core-s3c64xx.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2010 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
* Marek Szyprowski <m.szyprowski@samsung.com>
*
* Samsung OneNAD Controller core functions
*/
#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
*/
/* re-define device name depending on support. */
static inline void s3c_onenand_setname(char *name)
{
#ifdef CONFIG_S3C_DEV_ONENAND
s3c_device_onenand.name = name;
#endif
}
static inline void s3c64xx_onenand1_setname(char *name)
{
#ifdef CONFIG_S3C64XX_DEV_ONENAND1
s3c64xx_device_onenand1.name = name;
#endif
}
#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
arch/arm/mach-s3c/otom.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/*
* (c) 2005 Guillaume GOURAT / NexVision
* guillaume.gourat@nexvision.fr
*
* NexVision OTOM board memory map definitions
*/
/*
* ok, we've used up to 0x01300000, now we need to find space for the
* peripherals that live in the nGCS[x] areas, which are quite numerous
* in their space.
*/
#ifndef __MACH_S3C24XX_OTOM_H
#define __MACH_S3C24XX_OTOM_H __FILE__
#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
/* physical offset addresses for the peripherals */
#define OTOM_PA_FLASH0_BASE (S3C2410_CS0)
#endif /* __MACH_S3C24XX_OTOM_H */
arch/arm/mach-s3c/pm-core-s3c64xx.h
View file @ 0d297df0
......@@ -20,23 +20,6 @@
static inline void s3c_pm_debug_init_uart(void)
{
#ifdef CONFIG_SAMSUNG_PM_DEBUG
u32 tmp = __raw_readl(S3C_PCLK_GATE);
/* As a note, since the S3C64XX UARTs generally have multiple
* clock sources, we simply enable PCLK at the moment and hope
* that the resume settings for the UART are suitable for the
* use with PCLK.
*/
tmp |= S3C_CLKCON_PCLK_UART0;
tmp |= S3C_CLKCON_PCLK_UART1;
tmp |= S3C_CLKCON_PCLK_UART2;
tmp |= S3C_CLKCON_PCLK_UART3;
__raw_writel(tmp, S3C_PCLK_GATE);
udelay(10);
#endif
}
static inline void s3c_pm_arch_prepare_irqs(void)
......
arch/arm/mach-s3c/pm-s3c64xx.c
View file @ 0d297df0
......@@ -173,23 +173,6 @@ static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
&s3c64xx_pm_f,
};
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
unsigned long flags;
int i;
local_irq_save(flags);
for (i = 0; i < 4; i++) {
if (clear & (1 << i))
gpio_set_value(S3C64XX_GPN(12 + i), 0);
if (set & (1 << i))
gpio_set_value(S3C64XX_GPN(12 + i), 1);
}
local_irq_restore(flags);
}
#endif
#ifdef CONFIG_PM_SLEEP
static struct sleep_save core_save[] = {
SAVE_ITEM(S3C64XX_MEM0DRVCON),
......@@ -224,8 +207,6 @@ void s3c_pm_restore_core(void)
{
__raw_writel(0, S3C64XX_EINT_MASK);
s3c_pm_debug_smdkled(1 << 2, 0);
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
}
......@@ -258,9 +239,6 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
S3C64XX_WAKEUP_STAT);
/* set the LED state to 0110 over sleep */
s3c_pm_debug_smdkled(3 << 1, 0xf);
/* issue the standby signal into the pm unit. Note, we
* issue a write-buffer drain just in case */
......@@ -305,56 +283,6 @@ static void s3c64xx_pm_prepare(void)
__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
}
#ifdef CONFIG_SAMSUNG_PM_DEBUG
void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
{
u32 ucon;
u32 ucon_clk
u32 save_clk;
u32 new_ucon;
u32 delta;
if (!soc_is_s3c64xx())
return;
ucon = __raw_readl(regs + S3C2410_UCON);
ucon_clk = ucon & S3C6400_UCON_CLKMASK;
sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
/* S3C64XX UART blocks only support level interrupts, so ensure that
* when we restore unused UART blocks we force the level interrupt
* settings. */
save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
/* We have a constraint on changing the clock type of the UART
* between UCLKx and PCLK, so ensure that when we restore UCON
* that the CLK field is correctly modified if the bootloader
* has changed anything.
*/
if (ucon_clk != save_clk) {
new_ucon = save->ucon;
delta = ucon_clk ^ save_clk;
/* change from UCLKx => wrong PCLK,
* either UCLK can be tested for by a bit-test
* with UCLK0 */
if (ucon_clk & S3C6400_UCON_UCLK0 &&
!(save_clk & S3C6400_UCON_UCLK0) &&
delta & S3C6400_UCON_PCLK2) {
new_ucon &= ~S3C6400_UCON_UCLK0;
} else if (delta == S3C6400_UCON_PCLK2) {
/* as an precaution, don't change from
* PCLK2 => PCLK or vice-versa */
new_ucon ^= S3C6400_UCON_PCLK2;
}
S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
ucon, new_ucon, save->ucon);
save->ucon = new_ucon;
}
}
#endif
int __init s3c64xx_pm_init(void)
{
int i;
......@@ -384,17 +312,6 @@ static __init int s3c64xx_pm_initcall(void)
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
gpio_direction_output(S3C64XX_GPN(12), 0);
gpio_direction_output(S3C64XX_GPN(13), 0);
gpio_direction_output(S3C64XX_GPN(14), 0);
gpio_direction_output(S3C64XX_GPN(15), 0);
#endif
return 0;
}
arch_initcall(s3c64xx_pm_initcall);
arch/arm/mach-s3c/pm.c
View file @ 0d297df0
......@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
samsung_pm_saved_gpios();
}
s3c_pm_save_uarts(soc_is_s3c2410());
s3c_pm_save_uarts(false);
s3c_pm_save_core();
/* set the irq configuration for wake */
......@@ -137,7 +137,7 @@ static int s3c_pm_enter(suspend_state_t state)
/* restore the system state */
s3c_pm_restore_core();
s3c_pm_restore_uarts(soc_is_s3c2410());
s3c_pm_restore_uarts(false);
if (!of_have_populated_dt()) {
samsung_pm_restore_gpios();
......@@ -152,9 +152,6 @@ static int s3c_pm_enter(suspend_state_t state)
S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
/* LEDs should now be 1110 */
s3c_pm_debug_smdkled(1 << 1, 0);
s3c_pm_check_restore();
/* ok, let's return from sleep */
......
arch/arm/mach-s3c/pm.h
View file @ 0d297df0
......@@ -64,18 +64,6 @@ extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
#define s3c_irqext_wake NULL
#endif
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
/**
* s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
* @set: set bits for the state of the LEDs
* @clear: clear bits for the state of the LEDs.
*/
extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
#else
static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
/**
* s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
*
......
arch/arm/mach-s3c/regs-srom-s3c64xx.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2009 Andy Green <andy@warmcat.com>
*
* S3C64XX SROM definitions
*/
#ifndef __MACH_S3C64XX_REGS_SROM_H
#define __MACH_S3C64XX_REGS_SROM_H __FILE__
#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x))
#define S3C64XX_SROM_BW S3C64XX_SROMREG(0)
#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4)
#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8)
#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc)
#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10)
#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14)
#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18)
/*
* one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
*/
#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0
#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2
#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3
#define S3C64XX_SROM_BW__CS_MASK 0xf
#define S3C64XX_SROM_BW__NCS0__SHIFT 0
#define S3C64XX_SROM_BW__NCS1__SHIFT 4
#define S3C64XX_SROM_BW__NCS2__SHIFT 8
#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc
#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10
/*
* applies to same to BCS0 - BCS4
*/
#define S3C64XX_SROM_BCX__PMC__SHIFT 0
#define S3C64XX_SROM_BCX__PMC__MASK 3
#define S3C64XX_SROM_BCX__TACP__SHIFT 4
#define S3C64XX_SROM_BCX__TACP__MASK 0xf
#define S3C64XX_SROM_BCX__TCAH__SHIFT 8
#define S3C64XX_SROM_BCX__TCAH__MASK 0xf
#define S3C64XX_SROM_BCX__TCOH__SHIFT 12
#define S3C64XX_SROM_BCX__TCOH__MASK 0xf
#define S3C64XX_SROM_BCX__TACC__SHIFT 16
#define S3C64XX_SROM_BCX__TACC__MASK 0x1f
#define S3C64XX_SROM_BCX__TCOS__SHIFT 24
#define S3C64XX_SROM_BCX__TCOS__MASK 0xf
#define S3C64XX_SROM_BCX__TACS__SHIFT 28
#define S3C64XX_SROM_BCX__TACS__MASK 0xf
#endif /* __MACH_S3C64XX_REGS_SROM_H */
arch/arm/mach-s3c/s3c6400.c
View file @ 0d297df0
......@@ -36,7 +36,6 @@
#include "iic-core.h"
#include "s3c64xx.h"
#include "onenand-core-s3c64xx.h"
void __init s3c6400_map_io(void)
{
......@@ -48,11 +47,6 @@ void __init s3c6400_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6400-onenand");
s3c64xx_onenand1_setname("s3c6400-onenand");
}
void __init s3c6400_init_irq(void)
......
arch/arm/mach-s3c/s3c6410.c
View file @ 0d297df0
......@@ -35,12 +35,9 @@
#include "cpu.h"
#include "devs.h"
#include "sdhci.h"
#include "adc-core.h"
#include "iic-core.h"
#include "ata-core-s3c64xx.h"
#include "s3c64xx.h"
#include "onenand-core-s3c64xx.h"
void __init s3c6410_map_io(void)
{
......@@ -52,12 +49,6 @@ void __init s3c6410_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_adc_setname("s3c64xx-adc");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_irq(void)
......
arch/arm/mach-s3c/sdhci.h
View file @ 0d297df0
......@@ -48,35 +48,10 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
/* Helper function availability */
extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C2416 SDHCI setup */
#ifdef CONFIG_S3C2416_SETUP_SDHCI
static inline void s3c2416_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
#endif /* CONFIG_S3C_DEV_HSMMC */
}
static inline void s3c2416_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
#endif /* CONFIG_S3C_DEV_HSMMC1 */
}
#else
static inline void s3c2416_default_sdhci0(void) { }
static inline void s3c2416_default_sdhci1(void) { }
#endif /* CONFIG_S3C2416_SETUP_SDHCI */
/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
......
arch/arm/mach-s3c/setup-ide-s3c64xx.c deleted 100644 → 0
View file @ cc146410
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2010 Samsung Electronics Co., Ltd.
// http://www.samsung.com/
//
// S3C64XX setup information for IDE
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/platform_data/ata-samsung_cf.h>
#include "map.h"
#include "regs-clock.h"
#include "gpio-cfg.h"
#include "gpio-samsung.h"
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
/* Independent CF interface, CF chip select configuration */
writel(reg | MEM_SYS_CFG_INDEP_CF |
MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
/* Set XhiDATA[15:0] pins as CF Data[15:0] */
s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
}
arch/arm/mach-s3c/sleep-s3c64xx.S
View file @ 0d297df0
......@@ -39,31 +39,4 @@
ENTRY(s3c_cpu_resume)
msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
ldr r2, =LL_UART /* for debug */
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
* as the uboot version supplied resets these to inputs during the
* resume checks.
*/
ldr r3, =S3C64XX_PA_GPIO
ldr r0, [ r3, #S3C64XX_GPNCON ]
bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
str r0, [ r3, #S3C64XX_GPNCON ]
ldr r0, [ r3, #S3C64XX_GPNDAT ]
bic r0, r0, #0xf << 12 @ GPN12..15
orr r0, r0, #1 << 15 @ GPN15
str r0, [ r3, #S3C64XX_GPNDAT ]
#endif
b cpu_resume
include/linux/platform_data/media/s5p_hdmi.h deleted 100644 → 0
View file @ cc146410
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Driver header for S5P HDMI chip.
*
* Copyright (c) 2011 Samsung Electronics, Co. Ltd
* Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
*/
#ifndef S5P_HDMI_H
#define S5P_HDMI_H
struct i2c_board_info;
/**
* @hdmiphy_bus: controller id for HDMIPHY bus
* @hdmiphy_info: template for HDMIPHY I2C device
* @mhl_bus: controller id for MHL control bus
* @mhl_info: template for MHL I2C device
* @hpd_gpio: GPIO for Hot-Plug-Detect pin
*
* NULL pointer for *_info fields indicates that
* the corresponding chip is not present
*/
struct s5p_hdmi_platform_data {
int hdmiphy_bus;
struct i2c_board_info *hdmiphy_info;
int mhl_bus;
struct i2c_board_info *mhl_info;
int hpd_gpio;
};
#endif /* S5P_HDMI_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7