ath11k: avoid firmware crash when reg set for QCA6390/WCN6855

For the NL80211_REGDOM_SET_BY_USER hint from cfg80211, it set the new
alpha2 code to ath11k, then ath11k send WMI_SET_INIT_COUNTRY_CMDID to
firmware for all chips currently. When test with WCN6855/QCA6390 chips,
this WMI CMD leads firmware crash.

For AP based chips(ipq8074/qcn9074), WMI_SET_INIT_COUNTRY_CMDID is used
to send to firmware, for STATION based chips(WCN6855/QCA6390), it need to
use another WMI CMD WMI_SET_CURRENT_COUNTRY_CMDID.

Add flag current_cc_support in hardware parameters, it is used to
distinguish AP/STA platform. After that, the firmware will work
normal and the regulatory feature works well for QCA6390/WCN6855.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220119041355.32014-1-quic_wgong@quicinc.com

drivers/net/wireless/ath/ath11k/core.c

@@ -98,6 +98,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.wakeup_mhi = false,
 		.supports_rssi_stats = false,
 		.fw_wmi_diag_event = false,
+		.current_cc_support = false,
 	},
 	{
 		.hw_rev = ATH11K_HW_IPQ6018_HW10,
@@ -162,6 +163,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.wakeup_mhi = false,
 		.supports_rssi_stats = false,
 		.fw_wmi_diag_event = false,
+		.current_cc_support = false,
 	},
 	{
 		.name = "qca6390 hw2.0",
@@ -225,6 +227,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.wakeup_mhi = true,
 		.supports_rssi_stats = true,
 		.fw_wmi_diag_event = true,
+		.current_cc_support = true,
 	},
 	{
 		.name = "qcn9074 hw1.0",
@@ -288,6 +291,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.wakeup_mhi = false,
 		.supports_rssi_stats = false,
 		.fw_wmi_diag_event = false,
+		.current_cc_support = false,
 	},
 	{
 		.name = "wcn6855 hw2.0",
@@ -351,6 +355,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.wakeup_mhi = true,
 		.supports_rssi_stats = true,
 		.fw_wmi_diag_event = true,
+		.current_cc_support = true,
 	},
 	{
 		.name = "wcn6855 hw2.1",
@@ -413,6 +418,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.wakeup_mhi = true,
 		.supports_rssi_stats = true,
 		.fw_wmi_diag_event = true,
+		.current_cc_support = true,
 	},
 };
 

drivers/net/wireless/ath/ath11k/hw.h

@@ -192,6 +192,7 @@ struct ath11k_hw_params {
 	bool wakeup_mhi;
 	bool supports_rssi_stats;
 	bool fw_wmi_diag_event;
+	bool current_cc_support;
 };
 
 struct ath11k_hw_ops {

drivers/net/wireless/ath/ath11k/reg.c

@@ -48,6 +48,7 @@ ath11k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct wmi_init_country_params init_country_param;
+	struct wmi_set_current_country_params set_current_param = {};
 	struct ath11k *ar = hw->priv;
 	int ret;
 
@@ -76,18 +77,26 @@ ath11k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 		return;
 	}
 
-	/* Set the country code to the firmware and wait for
+	/* Set the country code to the firmware and will receive
 	 * the WMI_REG_CHAN_LIST_CC EVENT for updating the
 	 * reg info
 	 */
-	init_country_param.flags = ALPHA_IS_SET;
-	memcpy(&init_country_param.cc_info.alpha2, request->alpha2, 2);
-	init_country_param.cc_info.alpha2[2] = 0;
+	if (ar->ab->hw_params.current_cc_support) {
+		memcpy(&set_current_param.alpha2, request->alpha2, 2);
+		ret = ath11k_wmi_send_set_current_country_cmd(ar, &set_current_param);
+		if (ret)
+			ath11k_warn(ar->ab,
+				    "failed set current country code: %d\n", ret);
+	} else {
+		init_country_param.flags = ALPHA_IS_SET;
+		memcpy(&init_country_param.cc_info.alpha2, request->alpha2, 2);
+		init_country_param.cc_info.alpha2[2] = 0;
 
-	ret = ath11k_wmi_send_init_country_cmd(ar, init_country_param);
-	if (ret)
-		ath11k_warn(ar->ab,
-			    "INIT Country code set to fw failed : %d\n", ret);
+		ret = ath11k_wmi_send_init_country_cmd(ar, init_country_param);
+		if (ret)
+			ath11k_warn(ar->ab,
+				    "INIT Country code set to fw failed : %d\n", ret);
+	}
 
 	ath11k_mac_11d_scan_stop(ar);
 	ar->regdom_set_by_user = true;