Commit 0d84c3e6 authored by Ulf Hansson's avatar Ulf Hansson

mmc: core: Convert to mmc_poll_for_busy() for erase/trim/discard

Rather than open coding the polling loop in mmc_do_erase(), let's convert
to use mmc_poll_for_busy().

To allow a slightly different error parsing during polling, compared to the
__mmc_switch() case, a new in-parameter to mmc_poll_for_busy() is needed,
but other than that the conversion is straight forward.

Besides addressing the open coding issue, moving to mmc_poll_for_busy() for
erase/trim/discard improves the behaviour according to below.

- Adds support for polling via the optional ->card_busy() host ops.
- Returns zero to indicate success when the final polling attempt finds the
  card non-busy, even if the timeout expired.
- Exits the polling loop when state moves to R1_STATE_TRAN, rather than
  when leaving R1_STATE_PRG.
- Decreases the starting range for throttling to 32-64us.
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarBaolin Wang <baolin.wang7@gmail.com>
Tested-by: default avatarLudovic Barre <ludovic.barre@st.com>
Reviewed-by: default avatarLudovic Barre <ludovic.barre@st.com>
Link: https://lore.kernel.org/r/20200204085449.32585-9-ulf.hansson@linaro.org
parent 2a1c7cda
......@@ -1658,8 +1658,6 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
struct mmc_command cmd = {};
unsigned int qty = 0, busy_timeout = 0;
bool use_r1b_resp = false;
unsigned long timeout;
int loop_udelay=64, udelay_max=32768;
int err;
mmc_retune_hold(card->host);
......@@ -1763,38 +1761,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
goto out;
timeout = jiffies + msecs_to_jiffies(busy_timeout);
do {
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
/* Do not retry else we can't see errors */
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err || R1_STATUS(cmd.resp[0])) {
pr_err("error %d requesting status %#x\n",
err, cmd.resp[0]);
err = -EIO;
goto out;
}
/* Timeout if the device never becomes ready for data and
* never leaves the program state.
*/
if (time_after(jiffies, timeout)) {
pr_err("%s: Card stuck in programming state! %s\n",
mmc_hostname(card->host), __func__);
err = -EIO;
goto out;
}
if ((cmd.resp[0] & R1_READY_FOR_DATA) &&
R1_CURRENT_STATE(cmd.resp[0]) != R1_STATE_PRG)
break;
usleep_range(loop_udelay, loop_udelay*2);
if (loop_udelay < udelay_max)
loop_udelay *= 2;
} while (1);
/* Let's poll to find out when the erase operation completes. */
err = mmc_poll_for_busy(card, busy_timeout, MMC_BUSY_ERASE);
out:
mmc_retune_release(card->host);
......
......@@ -445,7 +445,7 @@ int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal)
}
static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
bool *busy)
enum mmc_busy_cmd busy_cmd, bool *busy)
{
struct mmc_host *host = card->host;
u32 status = 0;
......@@ -464,7 +464,17 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
if (err)
return err;
err = mmc_switch_status_error(card->host, status);
switch (busy_cmd) {
case MMC_BUSY_CMD6:
err = mmc_switch_status_error(card->host, status);
break;
case MMC_BUSY_ERASE:
err = R1_STATUS(status) ? -EIO : 0;
break;
default:
err = -EINVAL;
}
if (err)
return err;
......@@ -472,8 +482,9 @@ static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err,
return 0;
}
static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
bool send_status, bool retry_crc_err)
static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
bool send_status, bool retry_crc_err,
enum mmc_busy_cmd busy_cmd)
{
struct mmc_host *host = card->host;
int err;
......@@ -500,7 +511,7 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
*/
expired = time_after(jiffies, timeout);
err = mmc_busy_status(card, retry_crc_err, &busy);
err = mmc_busy_status(card, retry_crc_err, busy_cmd, &busy);
if (err)
return err;
......@@ -522,6 +533,12 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
return 0;
}
int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
enum mmc_busy_cmd busy_cmd)
{
return __mmc_poll_for_busy(card, timeout_ms, true, false, busy_cmd);
}
/**
* __mmc_switch - modify EXT_CSD register
* @card: the MMC card associated with the data transfer
......@@ -591,7 +608,8 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
goto out_tim;
/* Let's try to poll to find out when the command is completed. */
err = mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err);
err = __mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err,
MMC_BUSY_CMD6);
if (err)
goto out;
......
......@@ -10,6 +10,11 @@
#include <linux/types.h>
enum mmc_busy_cmd {
MMC_BUSY_CMD6,
MMC_BUSY_ERASE,
};
struct mmc_host;
struct mmc_card;
......@@ -30,6 +35,8 @@ int mmc_interrupt_hpi(struct mmc_card *card);
int mmc_can_ext_csd(struct mmc_card *card);
int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
enum mmc_busy_cmd busy_cmd);
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms, unsigned char timing,
bool send_status, bool retry_crc_err);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment