Skip to content

L
linux
Commit 0dbc2c16 authored by Jean-Francois Moine's avatar Jean-Francois Moine Committed by Mauro Carvalho Chehab
Browse files
Options

V4L/DVB (10368): gspca - spca561: Fix bugs and rewrite the init/start of the rev72a. 

The bugs were in the first init sequence of the sensor.
The rewrite is adapted from a ms-win trace.
Signed-off-by: default avatarJean-Francois Moine <moinejf@free.fr>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 576ed7b5
Hide whitespace changes
Inline Side-by-side
Showing with 42 additions and 126 deletions
drivers/media/video/gspca/spca561.c
View file @ 0dbc2c16
......@@ -145,33 +145,34 @@ static const struct v4l2_pix_format sif_072a_mode[] = {
#define SPCA561_SNAPBIT 0x20
#define SPCA561_SNAPCTRL 0x40
static const __u16 rev72a_init_data1[][2] = {
static const u16 rev72a_reset[][2] = {
{0x0000, 0x8114}, /* Software GPIO output data */
{0x0001, 0x8114}, /* Software GPIO output data */
{0x0000, 0x8112}, /* Some kind of reset */
{}
};
static const __u16 rev72a_init_data1[][2] = {
{0x0003, 0x8701}, /* PCLK clock delay adjustment */
{0x0001, 0x8703}, /* HSYNC from cmos inverted */
{0x0011, 0x8118}, /* Enable and conf sensor */
{0x0001, 0x8118}, /* Conf sensor */
{0x0092, 0x8804}, /* I know nothing about these */
{0x0010, 0x8802}, /* 0x88xx registers, so I won't */
{0x000d, 0x8805}, /* sensor default setting */
{}
};
static const __u16 rev72a_init_sensor1[][2] = {
/* ms-win values */
{0x0001, 0x0018}, /* 0x01 <- 0x0d */
{0x0002, 0x0065}, /* 0x02 <- 0x18 */
{0x0004, 0x0121}, /* 0x04 <- 0x0165 */
{0x0005, 0x00aa}, /* 0x05 <- 0x21 */
{0x0007, 0x0004}, /* 0x07 <- 0xaa */
{0x0020, 0x1502}, /* 0x20 <- 0x1504 */
{0x0039, 0x0010}, /* 0x39 <- 0x02 */
{0x0035, 0x0049}, /* 0x35 <- 0x10 */
{0x0009, 0x100b}, /* 0x09 <- 0x1049 */
{0x0028, 0x000f}, /* 0x28 <- 0x0b */
{0x003b, 0x003c}, /* 0x3b <- 0x0f */
{0x003c, 0x0000}, /* 0x3c <- 0x00 */
static const u16 rev72a_init_sensor1[][2] = {
{0x0001, 0x000d},
{0x0002, 0x0018},
{0x0004, 0x0165},
{0x0005, 0x0021},
{0x0007, 0x00aa},
{0x0020, 0x1504},
{0x0039, 0x0002},
{0x0035, 0x0010},
{0x0009, 0x1049},
{0x0028, 0x000b},
{0x003b, 0x000f},
{0x003c, 0x0000},
{}
};
static const __u16 rev72a_init_data2[][2] = {
......@@ -189,15 +190,10 @@ static const __u16 rev72a_init_data2[][2] = {
{0x0002, 0x8201}, /* Output address for r/w serial EEPROM */
{0x0008, 0x8200}, /* Clear valid bit for serial EEPROM */
{0x0001, 0x8200}, /* OprMode to be executed by hardware */
{0x0007, 0x8201}, /* Output address for r/w serial EEPROM */
{0x0008, 0x8200}, /* Clear valid bit for serial EEPROM */
{0x0001, 0x8200}, /* OprMode to be executed by hardware */
{0x0010, 0x8660}, /* Compensation memory stuff */
{0x0018, 0x8660}, /* Compensation memory stuff */
{0x0004, 0x8611}, /* R offset for white balance */
{0x0004, 0x8612}, /* Gr offset for white balance */
{0x0007, 0x8613}, /* B offset for white balance */
/* from ms-win */
{0x0000, 0x8611}, /* R offset for white balance */
{0x00fd, 0x8612}, /* Gr offset for white balance */
{0x0003, 0x8613}, /* B offset for white balance */
{0x0000, 0x8614}, /* Gb offset for white balance */
/* from ms-win */
{0x0035, 0x8651}, /* R gain for white balance */
......@@ -205,8 +201,8 @@ static const __u16 rev72a_init_data2[][2] = {
{0x005f, 0x8653}, /* B gain for white balance */
{0x0040, 0x8654}, /* Gb gain for white balance */
{0x0002, 0x8502}, /* Maximum average bit rate stuff */
{0x0011, 0x8802},
{0x0087, 0x8700}, /* Set master clock (96Mhz????) */
{0x0081, 0x8702}, /* Master clock output enable */
......@@ -217,104 +213,15 @@ static const __u16 rev72a_init_data2[][2] = {
{0x0003, 0x865c}, /* Vertical offset for valid lines */
{}
};
static const __u16 rev72a_init_sensor2[][2] = {
/* ms-win values */
{0x0003, 0x0121}, /* 0x03 <- 0x01 0x21 //289 */
{0x0004, 0x0165}, /* 0x04 <- 0x01 0x65 //357 */
{0x0005, 0x002f}, /* 0x05 <- 0x2f */
{0x0006, 0x0000}, /* 0x06 <- 0 */
{0x000a, 0x0002}, /* 0x0a <- 2 */
{0x0009, 0x1061}, /* 0x09 <- 0x1061 */
{0x0035, 0x0014}, /* 0x35 <- 0x14 */
{}
};
static const __u16 rev72a_init_data3[][2] = {
{0x0030, 0x8112}, /* ISO and drop packet enable */
/*fixme: should stop here*/
{0x0000, 0x8112}, /* Some kind of reset ???? */
{0x0009, 0x8118}, /* Enable sensor and set standby */
{0x0000, 0x8114}, /* Software GPIO output data */
{0x0000, 0x8114}, /* Software GPIO output data */
{0x0001, 0x8114}, /* Software GPIO output data */
{0x0000, 0x8112}, /* Some kind of reset ??? */
{0x0003, 0x8701},
{0x0001, 0x8703},
{0x0011, 0x8118},
{0x0001, 0x8118},
/***************/
{0x0092, 0x8804},
{0x0010, 0x8802},
{0x000d, 0x8805},
{0x0001, 0x8801},
{0x0000, 0x8800},
{0x0018, 0x8805},
{0x0002, 0x8801},
{0x0000, 0x8800},
{0x0065, 0x8805},
{0x0004, 0x8801},
{0x0001, 0x8800},
{0x0021, 0x8805},
{0x0005, 0x8801},
{0x0000, 0x8800},
{0x00aa, 0x8805},
{0x0007, 0x8801}, /* mode 0xaa */
{0x0000, 0x8800},
{0x0004, 0x8805},
{0x0020, 0x8801},
{0x0015, 0x8800}, /* mode 0x0415 */
{0x0002, 0x8805},
{0x0039, 0x8801},
{0x0000, 0x8800},
{0x0010, 0x8805},
{0x0035, 0x8801},
{0x0000, 0x8800},
{0x0049, 0x8805},
{0x0009, 0x8801},
{0x0010, 0x8800},
{0x000b, 0x8805},
{0x0028, 0x8801},
{0x0000, 0x8800},
{0x000f, 0x8805},
{0x003b, 0x8801},
{0x0000, 0x8800},
{0x0000, 0x8805},
{0x003c, 0x8801},
{0x0000, 0x8800},
{0x0002, 0x8502},
{0x0039, 0x8801},
{0x0000, 0x8805},
{0x0000, 0x8800},
{0x0087, 0x8700}, /* overwrite by start */
{0x0081, 0x8702},
{0x0000, 0x8500},
/* {0x0010, 0x8500}, -- Previous line was this */
{0x0002, 0x865b},
{0x0003, 0x865c},
/***************/
{0x0003, 0x8801}, /* 0x121-> 289 */
{0x0021, 0x8805},
{0x0001, 0x8800},
{0x0004, 0x8801}, /* 0x165 -> 357 */
{0x0065, 0x8805},
{0x0001, 0x8800},
{0x0005, 0x8801}, /* 0x2f //blanking control colonne */
{0x002f, 0x8805},
{0x0000, 0x8800},
{0x0006, 0x8801}, /* 0x00 //blanking mode row */
{0x0000, 0x8805},
{0x0000, 0x8800},
{0x000a, 0x8801}, /* 0x01 //0x02 */
{0x0001, 0x8805},
{0x0000, 0x8800},
{0x0009, 0x8801}, /* 0x1061 - setexposure times && pixel clock
static const u16 rev72a_init_sensor2[][2] = {
{0x0003, 0x0121},
{0x0004, 0x0165},
{0x0005, 0x002f}, /* blanking control column */
{0x0006, 0x0000}, /* blanking mode row*/
{0x000a, 0x0002},
{0x0009, 0x1061}, /* setexposure times && pixel clock
* 0001 0 | 000 0110 0001 */
{0x0061, 0x8805}, /* 61 31 */
{0x0008, 0x8800}, /* 08 */
{0x0035, 0x8801}, /* 0x14 - set gain general */
{0x001f, 0x8805}, /* 0x14 */
{0x0000, 0x8800},
{0x000e, 0x8112}, /* white balance - was 30 */
{0x0035, 0x0014},
{}
};
......@@ -459,6 +366,7 @@ static void i2c_write(struct gspca_dev *gspca_dev, __u16 value, __u16 reg)
reg_r(gspca_dev, 0x8803, 1);
if (!gspca_dev->usb_buf[0])
return;
msleep(10);
} while (--retry);
}
......@@ -478,6 +386,7 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode)
reg_r(gspca_dev, 0x8805, 1);
return ((int) value << 8) | gspca_dev->usb_buf[0];
}
msleep(10);
} while (--retry);
return -1;
}
......@@ -570,11 +479,13 @@ static int sd_init_12a(struct gspca_dev *gspca_dev)
static int sd_init_72a(struct gspca_dev *gspca_dev)
{
PDEBUG(D_STREAM, "Chip revision: 072a");
write_vector(gspca_dev, rev72a_reset);
msleep(200);
write_vector(gspca_dev, rev72a_init_data1);
write_sensor_72a(gspca_dev, rev72a_init_sensor1);
write_vector(gspca_dev, rev72a_init_data2);
write_sensor_72a(gspca_dev, rev72a_init_sensor2);
write_vector(gspca_dev, rev72a_init_data3);
reg_w_val(gspca_dev->dev, 0x8112, 0x30);
return 0;
}
......@@ -729,6 +640,11 @@ static int sd_start_72a(struct gspca_dev *gspca_dev)
int Clck;
int mode;
write_vector(gspca_dev, rev72a_reset);
msleep(200);
write_vector(gspca_dev, rev72a_init_data1);
write_sensor_72a(gspca_dev, rev72a_init_sensor1);
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
switch (mode) {
default:
......@@ -745,11 +661,11 @@ static int sd_start_72a(struct gspca_dev *gspca_dev)
}
reg_w_val(dev, 0x8500, mode); /* mode */
reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */
reg_w_val(dev, 0x8112, 0x10 | 0x20);
write_sensor_72a(gspca_dev, rev72a_init_sensor2);
setcontrast(gspca_dev);
/* setbrightness(gspca_dev); * fixme: bad values */
setwhite(gspca_dev);
setautogain(gspca_dev);
reg_w_val(dev, 0x8112, 0x10 | 0x20);
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7