Commit 0e402c6e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  ucc_geth: eliminate max-speed, change interface-type to phy-connection-type
  smc911x: fix compilation breakage
  pasemi_mac: Fix local-mac-address parsing
  pasemi_mac: Terminate PCI ID list
  pasemi_mac: Interrupt ack fixes
  pasemi_mac: Fix register defines
parents 28aa483f 4e19b5c1
......@@ -85,6 +85,7 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
{
struct pci_dev *pdev = mac->pdev;
struct device_node *dn = pci_device_to_OF_node(pdev);
int len;
const u8 *maddr;
u8 addr[6];
......@@ -94,9 +95,17 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return -ENOENT;
}
maddr = of_get_property(dn, "local-mac-address", NULL);
maddr = of_get_property(dn, "local-mac-address", &len);
if (maddr && len == 6) {
memcpy(mac->mac_addr, maddr, 6);
return 0;
}
/* Some old versions of firmware mistakenly uses mac-address
* (and as a string) instead of a byte array in local-mac-address.
*/
/* Fall back to mac-address for older firmware */
if (maddr == NULL)
maddr = of_get_property(dn, "mac-address", NULL);
......@@ -106,6 +115,7 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return -ENOENT;
}
if (sscanf(maddr, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &addr[0],
&addr[1], &addr[2], &addr[3], &addr[4], &addr[5]) != 6) {
dev_warn(&pdev->dev,
......@@ -113,7 +123,8 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac)
return -EINVAL;
}
memcpy(mac->mac_addr, addr, sizeof(addr));
memcpy(mac->mac_addr, addr, 6);
return 0;
}
......@@ -384,17 +395,14 @@ static void pasemi_mac_replenish_rx_ring(struct net_device *dev)
static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac)
{
unsigned int reg, stat;
unsigned int reg, pcnt;
/* Re-enable packet count interrupts: finally
* ack the packet count interrupt we got in rx_intr.
*/
pci_read_config_dword(mac->iob_pdev,
PAS_IOB_DMA_RXCH_STAT(mac->dma_rxch),
&stat);
pcnt = *mac->rx_status & PAS_STATUS_PCNT_M;
reg = PAS_IOB_DMA_RXCH_RESET_PCNT(stat & PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
| PAS_IOB_DMA_RXCH_RESET_PINTC;
reg = PAS_IOB_DMA_RXCH_RESET_PCNT(pcnt) | PAS_IOB_DMA_RXCH_RESET_PINTC;
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch),
......@@ -403,14 +411,12 @@ static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac)
static void pasemi_mac_restart_tx_intr(struct pasemi_mac *mac)
{
unsigned int reg, stat;
unsigned int reg, pcnt;
/* Re-enable packet count interrupts */
pci_read_config_dword(mac->iob_pdev,
PAS_IOB_DMA_TXCH_STAT(mac->dma_txch), &stat);
pcnt = *mac->tx_status & PAS_STATUS_PCNT_M;
reg = PAS_IOB_DMA_TXCH_RESET_PCNT(stat & PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
| PAS_IOB_DMA_TXCH_RESET_PINTC;
reg = PAS_IOB_DMA_TXCH_RESET_PCNT(pcnt) | PAS_IOB_DMA_TXCH_RESET_PINTC;
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_TXCH_RESET(mac->dma_txch), reg);
......@@ -591,21 +597,24 @@ static irqreturn_t pasemi_mac_tx_intr(int irq, void *data)
{
struct net_device *dev = data;
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
unsigned int reg, pcnt;
if (!(*mac->tx_status & PAS_STATUS_CAUSE_M))
return IRQ_NONE;
pasemi_mac_clean_tx(mac);
reg = PAS_IOB_DMA_TXCH_RESET_PINTC;
pcnt = *mac->tx_status & PAS_STATUS_PCNT_M;
reg = PAS_IOB_DMA_TXCH_RESET_PCNT(pcnt) | PAS_IOB_DMA_TXCH_RESET_PINTC;
if (*mac->tx_status & PAS_STATUS_SOFT)
reg |= PAS_IOB_DMA_TXCH_RESET_SINTC;
if (*mac->tx_status & PAS_STATUS_ERROR)
reg |= PAS_IOB_DMA_TXCH_RESET_DINTC;
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
reg);
return IRQ_HANDLED;
......@@ -974,6 +983,7 @@ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
if (txring->next_to_clean - txring->next_to_use == TX_RING_SIZE) {
spin_unlock_irqrestore(&txring->lock, flags);
pasemi_mac_clean_tx(mac);
pasemi_mac_restart_tx_intr(mac);
spin_lock_irqsave(&txring->lock, flags);
if (txring->next_to_clean - txring->next_to_use ==
......@@ -1210,6 +1220,7 @@ static void __devexit pasemi_mac_remove(struct pci_dev *pdev)
static struct pci_device_id pasemi_mac_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa005) },
{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa006) },
{ },
};
MODULE_DEVICE_TABLE(pci, pasemi_mac_pci_tbl);
......
......@@ -341,7 +341,7 @@ enum {
PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4)
#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000
#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 0
#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16
#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
PAS_IOB_DMA_RXCH_RESET_PCNT_M)
#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020
......@@ -352,7 +352,7 @@ enum {
#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001
#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4)
#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000
#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 0
#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16
#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
PAS_IOB_DMA_TXCH_RESET_PCNT_M)
#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020
......
......@@ -77,7 +77,6 @@ static const char version[] =
#include <linux/skbuff.h>
#include <asm/io.h>
#include <asm/irq.h>
#include "smc911x.h"
......@@ -2084,12 +2083,11 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr)
lp->ctl_rspeed = 100;
/* Grab the IRQ */
retval = request_irq(dev->irq, &smc911x_interrupt, IRQF_SHARED, dev->name, dev);
retval = request_irq(dev->irq, &smc911x_interrupt,
IRQF_SHARED | IRQF_TRIGGER_FALLING, dev->name, dev);
if (retval)
goto err_out;
set_irq_type(dev->irq, IRQT_FALLING);
#ifdef SMC_USE_DMA
lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
......
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
* Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......@@ -3737,21 +3737,21 @@ static int ucc_geth_close(struct net_device *dev)
const struct ethtool_ops ucc_geth_ethtool_ops = { };
static phy_interface_t to_phy_interface(const char *interface_type)
static phy_interface_t to_phy_interface(const char *phy_connection_type)
{
if (strcasecmp(interface_type, "mii") == 0)
if (strcasecmp(phy_connection_type, "mii") == 0)
return PHY_INTERFACE_MODE_MII;
if (strcasecmp(interface_type, "gmii") == 0)
if (strcasecmp(phy_connection_type, "gmii") == 0)
return PHY_INTERFACE_MODE_GMII;
if (strcasecmp(interface_type, "tbi") == 0)
if (strcasecmp(phy_connection_type, "tbi") == 0)
return PHY_INTERFACE_MODE_TBI;
if (strcasecmp(interface_type, "rmii") == 0)
if (strcasecmp(phy_connection_type, "rmii") == 0)
return PHY_INTERFACE_MODE_RMII;
if (strcasecmp(interface_type, "rgmii") == 0)
if (strcasecmp(phy_connection_type, "rgmii") == 0)
return PHY_INTERFACE_MODE_RGMII;
if (strcasecmp(interface_type, "rgmii-id") == 0)
if (strcasecmp(phy_connection_type, "rgmii-id") == 0)
return PHY_INTERFACE_MODE_RGMII_ID;
if (strcasecmp(interface_type, "rtbi") == 0)
if (strcasecmp(phy_connection_type, "rtbi") == 0)
return PHY_INTERFACE_MODE_RTBI;
return PHY_INTERFACE_MODE_MII;
......@@ -3819,29 +3819,21 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->phy_address = *prop;
/* get the phy interface type, or default to MII */
prop = of_get_property(np, "interface-type", NULL);
prop = of_get_property(np, "phy-connection-type", NULL);
if (!prop) {
/* handle interface property present in old trees */
prop = of_get_property(phy, "interface", NULL);
if (prop != NULL)
if (prop != NULL) {
phy_interface = enet_to_phy_interface[*prop];
else
max_speed = enet_to_speed[*prop];
} else
phy_interface = PHY_INTERFACE_MODE_MII;
} else {
phy_interface = to_phy_interface((const char *)prop);
}
/* get speed, or derive from interface */
prop = of_get_property(np, "max-speed", NULL);
if (!prop) {
/* handle interface property present in old trees */
prop = of_get_property(phy, "interface", NULL);
if (prop != NULL)
max_speed = enet_to_speed[*prop];
} else {
max_speed = *prop;
}
if (!max_speed) {
/* get speed, or derive from PHY interface */
if (max_speed == 0)
switch (phy_interface) {
case PHY_INTERFACE_MODE_GMII:
case PHY_INTERFACE_MODE_RGMII:
......@@ -3854,9 +3846,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
max_speed = SPEED_100;
break;
}
}
if (max_speed == SPEED_1000) {
/* configure muram FIFOs for gigabit operation */
ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT;
ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT;
ug_info->uf_info.urfset = UCC_GETH_URFSET_GIGA_INIT;
......
/*
* drivers/net/ucc_geth_mii.c
*
* Gianfar Ethernet Driver -- MIIM bus implementation
* Provides Bus interface for MIIM regs
* QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
* Provides Bus interface for MII Management regs in the UCC register space
*
* Author: Li Yang
* Copyright (C) 2007 Freescale Semiconductor, Inc.
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
* Authors: Li Yang <leoli@freescale.com>
* Kim Phillips <kim.phillips@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......
/*
* drivers/net/ucc_geth_mii.h
*
* Gianfar Ethernet Driver -- MII Management Bus Implementation
* Driver for the MDIO bus controller in the Gianfar register space
* QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
* Provides Bus interface for MII Management regs in the UCC register space
*
* Author: Andy Fleming
* Maintainer: Kumar Gala
* Copyright (C) 2007 Freescale Semiconductor, Inc.
*
* Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
* Authors: Li Yang <leoli@freescale.com>
* Kim Phillips <kim.phillips@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment