Commit 0e476d91 authored by Huacai Chen's avatar Huacai Chen Committed by Ralf Baechle

MIPS: Loongson: Add Loongson-3 Kconfig options

Added Kconfig options include: Loongson-3 CPU and machine definition,
CPU cache features, UEFI-like firmware interface (LEFI), HT-linked PCI,
and swiotlb support.
Signed-off-by: default avatarHuacai Chen <chenhc@lemote.com>
Signed-off-by: default avatarHongliang Tao <taohl@lemote.com>
Signed-off-by: default avatarHua Yan <yanh@lemote.com>
Tested-by: default avatarAlex Smith <alex.smith@imgtec.com>
Reviewed-by: default avatarAlex Smith <alex.smith@imgtec.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6637Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 1299b0e0
......@@ -1153,6 +1153,18 @@ choice
prompt "CPU type"
default CPU_R4X00
config CPU_LOONGSON3
bool "Loongson 3 CPU"
depends on SYS_HAS_CPU_LOONGSON3
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
help
The Loongson 3 processor implements the MIPS64R2 instruction
set with many extensions.
config CPU_LOONGSON2E
bool "Loongson 2E"
depends on SYS_HAS_CPU_LOONGSON2E
......@@ -1549,6 +1561,10 @@ config CPU_BMIPS5000
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
config SYS_HAS_CPU_LOONGSON3
bool
select CPU_SUPPORTS_CPUFREQ
config SYS_HAS_CPU_LOONGSON2E
bool
......@@ -1761,7 +1777,7 @@ choice
config PAGE_SIZE_4KB
bool "4kB"
depends on !CPU_LOONGSON2
depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
help
This option select the standard 4kB Linux page size. On some
R3000-family processors this is the only available page size. Using
......@@ -2493,6 +2509,17 @@ config PCI
your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
say Y, otherwise N.
config HT_PCI
bool "Support for HT-linked PCI"
default y
depends on CPU_LOONGSON3
select PCI
select PCI_DOMAINS
help
Loongson family machines use Hyper-Transport bus for inter-core
connection and device connection. The PCI bus is a subordinate
linked at HT. Choose Y for Loongson-3 based machines.
config PCI_DOMAINS
bool
......
......@@ -59,6 +59,35 @@ config LEMOTE_MACH2F
These family machines include fuloong2f mini PC, yeeloong2f notebook,
LingLoong allinone PC and so forth.
config LEMOTE_MACH3A
bool "Lemote Loongson 3A family machines"
select ARCH_SPARSEMEM_ENABLE
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select GENERIC_HARDIRQS_NO__DO_IRQ
select BOOT_ELF32
select BOARD_SCACHE
select CSRC_R4K
select CEVT_R4K
select CPU_HAS_WB
select HW_HAS_PCI
select ISA
select HT_PCI
select I8259
select IRQ_CPU
select NR_CPUS_DEFAULT_4
select SYS_HAS_CPU_LOONGSON3
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select LOONGSON_MC146818
select ZONE_DMA32
select LEFI_FIRMWARE_INTERFACE
help
Lemote Loongson 3A family machines utilize the 3A revision of
Loongson processor and RS780/SBX00 chipset.
endchoice
config CS5536
......@@ -86,8 +115,25 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250
config IOMMU_HELPER
bool
config NEED_SG_DMA_LENGTH
bool
config SWIOTLB
bool "Soft IOMMU Support for All-Memory DMA"
default y
depends on CPU_LOONGSON3
select IOMMU_HELPER
select NEED_SG_DMA_LENGTH
select NEED_DMA_MAP_STATE
config LOONGSON_MC146818
bool
default n
config LEFI_FIRMWARE_INTERFACE
bool
endif # MACH_LOONGSON
......@@ -30,3 +30,4 @@ platform-$(CONFIG_MACH_LOONGSON) += loongson/
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
load-$(CONFIG_CPU_LOONGSON3) += 0xffffffff80200000
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment