Commit 0e6799ed authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] Alchemy: Get rid of au1xxx_irq_map_t.

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent d2126e23
......@@ -54,7 +54,7 @@
* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
au1xxx_irq_map_t __initdata au1xxx_ic0_map[] = {
struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
......
......@@ -562,9 +562,9 @@ void __init arch_init_irq(void)
{
int i;
unsigned long cp0_status;
au1xxx_irq_map_t *imp;
extern au1xxx_irq_map_t au1xxx_irq_map[];
extern au1xxx_irq_map_t au1xxx_ic0_map[];
struct au1xxx_irqmap *imp;
extern struct au1xxx_irqmap au1xxx_irq_map[];
extern struct au1xxx_irqmap au1xxx_ic0_map[];
extern int au1xxx_nr_irqs;
extern int au1xxx_ic0_nr_irqs;
......
......@@ -79,7 +79,7 @@ char irq_tab_alchemy[][5] __initdata = {
#endif
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
......
......@@ -58,7 +58,7 @@ char irq_tab_alchemy[][5] __initdata = {
[7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
......
......@@ -47,7 +47,7 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
};
......
......@@ -47,7 +47,7 @@
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
......
......@@ -54,7 +54,7 @@
#define PB1200_INT_END DB1200_INT_END
#endif
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
};
......
......@@ -52,7 +52,7 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
};
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
......
......@@ -52,7 +52,7 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
};
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
};
......
......@@ -47,7 +47,7 @@
#include <asm/system.h>
#include <asm/au1000.h>
au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
......
......@@ -102,16 +102,16 @@ extern unsigned int get_au1x00_lcd_clock(void);
/*
* Every board describes its IRQ mapping with this table.
*/
typedef struct au1xxx_irqmap {
struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
} au1xxx_irq_map_t;
};
/*
* init_IRQ looks for a table with this name.
*/
extern au1xxx_irq_map_t au1xxx_irq_map[];
extern struct au1xxx_irqmap au1xxx_irq_map[];
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment