Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

SuperH fixes for 3.3-rc5

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH
  sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr
  arch/sh: remove references to cpu_*_map.
  sh: Fix typo in pci-sh7780.c
  sh: add platform_device for SPI1 in setup-sh7757
  sh: modify resource for SPI0 in setup-sh7757
  sh: se7724: fix compile breakage
  sh: clkfwk: bugfix: use clk_reparent() for div6 clocks
  sh: clock-sh7724: fixup sh_fsi clock settings
  sh: sh7757lcr: update to the new MMCIF DMA configuration
  sh: fix the sh_mmcif_plat_data in board-sh7757lcr
  video: pvr2fb: Fix up spurious section mismatch warnings.
  sh: Defer to asm-generic/device.h.

arch/sh/boards/board-sh7757lcr.c

@@ -168,6 +168,11 @@ static struct resource sh_eth_giga1_resources[] = {
 		.start  = 0xfee00800,
 		.end    = 0xfee00fff,
 		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
 	}, {
 		.start  = 316,
 		.end    = 316,
@@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
-	.chan_priv_tx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_TX,
-	},
-	.chan_priv_rx	= {
-		.slave_id = SHDMA_SLAVE_MMCIF_RX,
-	}
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.dma		= &sh7757lcr_mmcif_dma,
 	.sup_pclk	= 0x0f,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
 	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {

arch/sh/boards/mach-ap325rxa/setup.c

@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <media/ov772x.h>
 #include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>

arch/sh/boards/mach-ecovec24/setup.c

@@ -29,9 +29,11 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <media/mt9t112.h>
 #include <asm/heartbeat.h>

arch/sh/boards/mach-kfr2r09/setup.c

@@ -22,6 +22,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
 #include <media/rj54n1cb0c.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>

arch/sh/boards/mach-migor/setup.c

@@ -21,9 +21,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <media/ov772x.h>
+#include <media/soc_camera.h>
 #include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>

arch/sh/boards/mach-se/7724/setup.c

@@ -24,6 +24,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_eth.h>
+#include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>

arch/sh/drivers/pci/pci-sh7780.c

@@ -74,7 +74,7 @@ struct pci_errors {
 	{ SH4_PCIINT_MLCK,	"master lock error" },
 	{ SH4_PCIINT_TABT,	"target-target abort" },
 	{ SH4_PCIINT_TRET,	"target retry time out" },
-	{ SH4_PCIINT_MFDE,	"master function disable erorr" },
+	{ SH4_PCIINT_MFDE,	"master function disable error" },
 	{ SH4_PCIINT_PRTY,	"address parity error" },
 	{ SH4_PCIINT_SERR,	"SERR" },
 	{ SH4_PCIINT_TWDP,	"data parity error for target write" },

arch/sh/include/asm/device.h

@@ -3,9 +3,10 @@
  *
  * This file is released under the GPLv2
  */
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
 
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */

arch/sh/kernel/cpu/sh4a/clock-sh7724.c

@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
 	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
 	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
-	CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
 	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
 	CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
 	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),

arch/sh/kernel/cpu/sh4a/setup-sh7757.c

@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = {
 	[0] = {
 		.start	= 0xfe002000,
 		.end	= 0xfe0020ff,
-		.flags	= IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	},
 	[1] = {
 		.start	= 86,
@@ -661,6 +661,25 @@ static struct platform_device spi0_device = {
 	.resource	= spi0_resources,
 };
 
+static struct resource spi1_resources[] = {
+	{
+		.start	= 0xffd8ee70,
+		.end	= 0xffd8eeff,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	{
+		.start	= 54,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device spi1_device = {
+	.name	= "sh_spi",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+	.resource	= spi1_resources,
+};
+
 static struct resource usb_ehci_resources[] = {
 	[0] = {
 		.start	= 0xfe4f1000,
@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = {
 	&dma2_device,
 	&dma3_device,
 	&spi0_device,
+	&spi1_device,
 	&usb_ehci_device,
 	&usb_ohci_device,
 };

arch/sh/kernel/smp.c

@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	mp_ops->prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
-	init_cpu_present(&cpu_possible_map);
+	init_cpu_present(cpu_possible_mask);
 #endif
 }
 

arch/sh/kernel/topology.c

@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
 	 * simple until we have a method for determining topology..
 	 */
-	return cpu_possible_map;
+	return *cpu_possible_mask;
 }
 
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu)

arch/sh/mm/cache-sh2a.c

@@ -23,6 +23,7 @@
 #define MAX_OCACHE_PAGES	32
 #define MAX_ICACHE_PAGES	32
 
+#ifdef CONFIG_CACHE_WRITEBACK
 static void sh2a_flush_oc_line(unsigned long v, int way)
 {
 	unsigned long addr = (v & 0x000007f0) | (way << 11);
@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way)
 		__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
 	}
 }
+#endif
 
 static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
 {

drivers/sh/clk/cpg.c

@@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk)
 		return -EINVAL;
 	}
 
-	clk->parent = clk->parent_table[val];
+	clk_reparent(clk, clk->parent_table[val]);
 	if (!clk->parent) {
 		pr_err("sh_clk_init_parent: unable to set parent");
 		return -EINVAL;

drivers/video/pvr2fb.c

@@ -1061,7 +1061,7 @@ static struct pvr2_board {
 	int (*init)(void);
 	void (*exit)(void);
 	char name[16];
-} board_driver[] = {
+} board_driver[] __refdata = {
 #ifdef CONFIG_SH_DREAMCAST
 	{ pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
 #endif