Commit 0e8322dc authored by Rabeeh Khoury's avatar Rabeeh Khoury Committed by Shawn Guo

arm64: dts: lx2160a: add dts for CEX7 platforms

The device tree enables the following features -
1. dpmac17 RGMII MAC connected to Atheros AR8035 phy
2. 2x MDIO busses
3. 2x USB 3.0 controllers
4. 4x SATA ports
5. MT35X 512Mb SPI flash
6. Temperature sensor on i2c0 channel 3
7. AMC6821 temperature and PWM fan controller (not fitted)

The module supports AMC6821 PWM controller which is not currently
assembled on currently available Com Express 7 hardware.

This commit adds support for the Clearfog CX and Honeycomb variants,
which are indentical in this patch, but once QSFP support is finished,
only the Clearfog CX will have a QSFP description.
Signed-off-by: default avatarRabeeh Khoury <rabeeh@solid-run.com>
[Add Makefile patch, split into clearfog-cx and honeycomb variants,
reworded commit -- rmk]
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 5705b9dc
...@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb ...@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
......
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160A-CEx7
//
// Copyright 2019 SolidRun Ltd.
/dts-v1/;
#include "fsl-lx2160a.dtsi"
/ {
model = "SolidRun LX2160A COM Express Type 7 module";
compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
aliases {
crypto = &crypto;
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "RT7290";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&crypto {
status = "okay";
};
&dpmac17 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii-id";
};
&emdio1 {
status = "okay";
rgmii_phy1: ethernet-phy@1 {
reg = <1>;
};
};
&esdhc1 {
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
status = "okay";
};
&i2c0 {
status = "okay";
i2c-switch@77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x77>;
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fan-temperature-ctrlr@18 {
compatible = "ti,amc6821";
reg = <0x18>;
cooling-min-state = <0>;
cooling-max-state = <9>;
#cooling-cells = <2>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
temperature-sensor@48 {
compatible = "nxp,sa56004";
reg = <0x48>;
vcc-supply = <&sb_3v3>;
};
};
};
};
&i2c2 {
status = "okay";
};
&i2c4 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
// IRQ10_B
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
};
};
&fspi {
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,m25p80";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <0>;
/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160A Clearfog CX board
//
// Copyright 2019 SolidRun Ltd.
/dts-v1/;
#include "fsl-lx2160a-clearfog-itx.dtsi"
/ {
model = "SolidRun LX2160A Clearfog CX";
compatible = "solidrun,clearfog-cx",
"solidrun,lx2160a-cex7", "fsl,lx2160a";
};
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160A Clearfog ITX board; this contains the
// common parts shared between the Clearfog CX and Honeycomb builds.
//
// Copyright 2019 SolidRun Ltd.
/dts-v1/;
#include "fsl-lx2160a-cex7.dtsi"
/ {
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&emdio2 {
status = "okay";
};
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
sd-uhs-sdr25;
sd-uhs-sdr12;
status = "okay";
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&sata2 {
status = "okay";
};
&sata3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160A Honeycomb board
//
// Copyright 2019 SolidRun Ltd.
/dts-v1/;
#include "fsl-lx2160a-clearfog-itx.dtsi"
/ {
model = "SolidRun LX2160A Honeycomb";
compatible = "solidrun,honeycomb",
"solidrun,lx2160a-cex7", "fsl,lx2160a";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment