regulator: bd71815: Get rid of struct bd71815_pmic

The content of bd71815_regulators is never changed, no need to duplicate
it, thus remove descs[BD71815_REGULATOR_CNT].
The *regmap, *dev and *rdev[BD71815_REGULATOR_CNT] are not really needed.
The *gps is unused.

Thus the struct bd71815_pmic can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210607143002.1600017-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/bd71815-regulator.c

@@ -28,14 +28,6 @@ struct bd71815_regulator {
 	const struct rohm_dvs_config *dvs;
 };
 
-struct bd71815_pmic {
-	struct bd71815_regulator descs[BD71815_REGULATOR_CNT];
-	struct regmap *regmap;
-	struct device *dev;
-	struct gpio_descs *gps;
-	struct regulator_dev *rdev[BD71815_REGULATOR_CNT];
-};
-
 static const int bd7181x_wled_currents[] = {
 	10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000,
 	5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000,
@@ -302,14 +294,13 @@ static int bd7181x_led_set_current_limit(struct regulator_dev *rdev,
 
 static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
 {
-	struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
 	int rid = rdev_get_id(rdev);
 	int ret, regh, regl, val;
 
 	regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2;
 	regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2;
 
-	ret = regmap_read(pmic->regmap, regh, &val);
+	ret = regmap_read(rdev->regmap, regh, &val);
 	if (ret)
 		return ret;
 
@@ -321,7 +312,7 @@ static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
 	 * by BD71815_BUCK_DVSSEL bit
 	 */
 	if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL)))
-		ret = regmap_read(pmic->regmap, regl, &val);
+		ret = regmap_read(rdev->regmap, regl, &val);
 
 	if (ret)
 		return ret;
@@ -335,14 +326,13 @@ static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
 static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
 					  unsigned int sel)
 {
-	struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
 	int rid = rdev_get_id(rdev);
 	int ret, val, reg, regh, regl;
 
 	regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2;
 	regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2;
 
-	ret = regmap_read(pmic->regmap, regh, &val);
+	ret = regmap_read(rdev->regmap, regh, &val);
 	if (ret)
 		return ret;
 
@@ -352,7 +342,7 @@ static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
 	 * voltages at runtime is not supported by this driver.
 	 */
 	if (((val & BD71815_BUCK_STBY_DVS))) {
-		return regmap_update_bits(pmic->regmap, regh, BD71815_VOLT_MASK,
+		return regmap_update_bits(rdev->regmap, regh, BD71815_VOLT_MASK,
 					  sel);
 	}
 	/* Update new voltage to the register which is not selected now */
@@ -361,12 +351,13 @@ static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
 	else
 		reg = regh;
 
-	ret = regmap_update_bits(pmic->regmap, reg, BD71815_VOLT_MASK, sel);
+	ret = regmap_update_bits(rdev->regmap, reg, BD71815_VOLT_MASK, sel);
 	if (ret)
 		return ret;
 
 	/* Select the other DVS register to be used */
-	return regmap_update_bits(pmic->regmap, regh, BD71815_BUCK_DVSSEL, ~val);
+	return regmap_update_bits(rdev->regmap, regh, BD71815_BUCK_DVSSEL,
+				  ~val);
 }
 
 static const struct regulator_ops bd7181x_ldo_regulator_ops = {
@@ -524,7 +515,7 @@ static const struct regulator_ops bd7181x_led_regulator_ops = {
 		.dvs = (_dvs),						\
 	}
 
-static struct bd71815_regulator bd71815_regulators[] = {
+static const struct bd71815_regulator bd71815_regulators[] = {
 	BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H,
 			   BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000,
 			   &buck1_dvs),
@@ -570,24 +561,16 @@ static struct bd71815_regulator bd71815_regulators[] = {
 
 static int bd7181x_probe(struct platform_device *pdev)
 {
-	struct bd71815_pmic *pmic;
 	struct regulator_config config = {};
 	int i, ret;
 	struct gpio_desc *ldo4_en;
+	struct regmap *regmap;
 
-	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
-	if (!pmic)
-		return -ENOMEM;
-
-	memcpy(pmic->descs, bd71815_regulators,	sizeof(pmic->descs));
-
-	pmic->dev = &pdev->dev;
-	pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!pmic->regmap) {
-		dev_err(pmic->dev, "No parent regmap\n");
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "No parent regmap\n");
 		return -ENODEV;
 	}
-	platform_set_drvdata(pdev, pmic);
 	ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev,
 					      pdev->dev.parent->of_node,
 						 "rohm,vsel-gpios", 0,
@@ -601,23 +584,23 @@ static int bd7181x_probe(struct platform_device *pdev)
 	}
 
 	/* Disable to go to ship-mode */
-	ret = regmap_update_bits(pmic->regmap, BD71815_REG_PWRCTRL,
-				 RESTARTEN, 0);
+	ret = regmap_update_bits(regmap, BD71815_REG_PWRCTRL, RESTARTEN, 0);
 	if (ret)
 		return ret;
 
 	config.dev = pdev->dev.parent;
-	config.regmap = pmic->regmap;
+	config.regmap = regmap;
 
 	for (i = 0; i < BD71815_REGULATOR_CNT; i++) {
-		struct regulator_desc *desc;
+		const struct regulator_desc *desc;
 		struct regulator_dev *rdev;
 
-		desc = &pmic->descs[i].desc;
+		desc = &bd71815_regulators[i].desc;
+
 		if (i == BD71815_LDO4)
 			config.ena_gpiod = ldo4_en;
-
-		config.driver_data = pmic;
+		else
+			config.ena_gpiod = NULL;
 
 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
 		if (IS_ERR(rdev)) {
@@ -626,8 +609,6 @@ static int bd7181x_probe(struct platform_device *pdev)
 				desc->name);
 			return PTR_ERR(rdev);
 		}
-		config.ena_gpiod = NULL;
-		pmic->rdev[i] = rdev;
 	}
 	return 0;
 }