Commit 0eebf9b9 authored by Ulf Hansson's avatar Ulf Hansson

Revert "mmc: dw_mmc: Don't allow Runtime PM for SDIO cards"

This reverts commit a6db2c86 ("mmc: dw_mmc: Don't allow Runtime PM for
SDIO cards")'

As dw_mmc now is capable of preventing runtime PM suspend while SDIO IRQs
are enabled, let's drop the less fine-grained method, which is preventing
runtime PM suspend for all SDIO cards - no matter of whether SDIO IRQs are
being enabled or not.

In this way we don't keep the host runtime PM resumed, unless it's really
needed, thus avoiding to waste power.

Especially when SDIO IRQs is supported via a separate out-of-band IRQ line,
which isn't defined by the SDIO standard, typically the SDIO func driver
doesn't enable SDIO IRQs via sdio_claim_irq(). So, for these cases we can
now allow the dwmmc device to be runtime PM suspended in-between requests.
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarDouglas Anderson <dianders@chromium.org>
Reviewed-by: default avatarDouglas Anderson <dianders@chromium.org>
parent ca8971ca
...@@ -1621,16 +1621,10 @@ static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card) ...@@ -1621,16 +1621,10 @@ static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
if (card->type == MMC_TYPE_SDIO || if (card->type == MMC_TYPE_SDIO ||
card->type == MMC_TYPE_SD_COMBO) { card->type == MMC_TYPE_SD_COMBO) {
if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags)) { set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
pm_runtime_get_noresume(mmc->parent);
set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
}
clk_en_a = clk_en_a_old & ~clken_low_pwr; clk_en_a = clk_en_a_old & ~clken_low_pwr;
} else { } else {
if (test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags)) { clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
pm_runtime_put_noidle(mmc->parent);
clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
}
clk_en_a = clk_en_a_old | clken_low_pwr; clk_en_a = clk_en_a_old | clken_low_pwr;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment