wl12xx: move debugging definitions to a separate file

Separate the debugging macros and other definitions to a new debug.h
file.  This is be needed because the sdio and spi modules don't need
to depend on the wl12xx module anymore, but still need to include
wl12xx.h.  Currently they do depend on it, because of the debugging
global that wl12xx exports.  A future patch will remove this
dependency.
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/acx.c

@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "wl12xx_80211.h"
 #include "reg.h"
 #include "ps.h"

drivers/net/wireless/wl12xx/boot.c

@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/wl12xx.h>
 
+#include "debug.h"
 #include "acx.h"
 #include "reg.h"
 #include "boot.h"

drivers/net/wireless/wl12xx/cmd.c

@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "reg.h"
 #include "io.h"
 #include "acx.h"

drivers/net/wireless/wl12xx/debug.h

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2011 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <coelho@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __DEBUG_H__
+#define __DEBUG_H__
+
+#include <linux/bitops.h>
+#include <linux/printk.h>
+
+#define DRIVER_NAME "wl12xx"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+	DEBUG_NONE	= 0,
+	DEBUG_IRQ	= BIT(0),
+	DEBUG_SPI	= BIT(1),
+	DEBUG_BOOT	= BIT(2),
+	DEBUG_MAILBOX	= BIT(3),
+	DEBUG_TESTMODE	= BIT(4),
+	DEBUG_EVENT	= BIT(5),
+	DEBUG_TX	= BIT(6),
+	DEBUG_RX	= BIT(7),
+	DEBUG_SCAN	= BIT(8),
+	DEBUG_CRYPT	= BIT(9),
+	DEBUG_PSM	= BIT(10),
+	DEBUG_MAC80211	= BIT(11),
+	DEBUG_CMD	= BIT(12),
+	DEBUG_ACX	= BIT(13),
+	DEBUG_SDIO	= BIT(14),
+	DEBUG_FILTERS   = BIT(15),
+	DEBUG_ADHOC     = BIT(16),
+	DEBUG_AP	= BIT(17),
+	DEBUG_MASTER	= (DEBUG_ADHOC | DEBUG_AP),
+	DEBUG_ALL	= ~0,
+};
+
+extern u32 wl12xx_debug_level;
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl1271_error(fmt, arg...) \
+	pr_err(DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl1271_warning(fmt, arg...) \
+	pr_warning(DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl1271_notice(fmt, arg...) \
+	pr_info(DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1271_info(fmt, arg...) \
+	pr_info(DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl1271_debug(level, fmt, arg...) \
+	do { \
+		if (level & wl12xx_debug_level) \
+			pr_debug(DRIVER_PREFIX fmt "\n", ##arg); \
+	} while (0)
+
+/* TODO: use pr_debug_hex_dump when it becomes available */
+#define wl1271_dump(level, prefix, buf, len)	\
+	do { \
+		if (level & wl12xx_debug_level) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       0);				\
+	} while (0)
+
+#define wl1271_dump_ascii(level, prefix, buf, len)	\
+	do { \
+		if (level & wl12xx_debug_level) \
+			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+				       DUMP_PREFIX_OFFSET, 16, 1,	\
+				       buf,				\
+				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+				       true);				\
+	} while (0)
+
+#endif /* __DEBUG_H__ */

drivers/net/wireless/wl12xx/debugfs.c

@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "acx.h"
 #include "ps.h"
 #include "io.h"

drivers/net/wireless/wl12xx/event.c

@@ -22,6 +22,7 @@
  */
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "reg.h"
 #include "io.h"
 #include "event.h"

drivers/net/wireless/wl12xx/init.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
+#include "debug.h"
 #include "init.h"
 #include "wl12xx_80211.h"
 #include "acx.h"

drivers/net/wireless/wl12xx/io.c

@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "wl12xx_80211.h"
 #include "io.h"
 #include "tx.h"

drivers/net/wireless/wl12xx/main.c

@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "wl12xx_80211.h"
 #include "reg.h"
 #include "io.h"

drivers/net/wireless/wl12xx/ps.c

@@ -25,6 +25,7 @@
 #include "ps.h"
 #include "io.h"
 #include "tx.h"
+#include "debug.h"
 
 #define WL1271_WAKEUP_TIMEOUT 500
 

drivers/net/wireless/wl12xx/rx.c

@@ -25,6 +25,7 @@
 #include <linux/sched.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "acx.h"
 #include "reg.h"
 #include "rx.h"

drivers/net/wireless/wl12xx/scan.c

@@ -24,6 +24,7 @@
 #include <linux/ieee80211.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "cmd.h"
 #include "scan.h"
 #include "acx.h"

drivers/net/wireless/wl12xx/sdio.c

@@ -34,6 +34,7 @@
 #include <linux/pm_runtime.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "wl12xx_80211.h"
 #include "io.h"
 

drivers/net/wireless/wl12xx/spi.c

@@ -31,6 +31,7 @@
 #include <linux/slab.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "wl12xx_80211.h"
 #include "io.h"
 

drivers/net/wireless/wl12xx/testmode.c

@@ -26,6 +26,7 @@
 #include <net/genetlink.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "acx.h"
 #include "reg.h"
 

drivers/net/wireless/wl12xx/tx.c

@@ -26,6 +26,7 @@
 #include <linux/etherdevice.h>
 
 #include "wl12xx.h"
+#include "debug.h"
 #include "io.h"
 #include "reg.h"
 #include "ps.h"

drivers/net/wireless/wl12xx/wl12xx.h

@@ -35,9 +35,6 @@
 #include "conf.h"
 #include "ini.h"
 
-#define DRIVER_NAME "wl1271"
-#define DRIVER_PREFIX DRIVER_NAME ": "
-
 /*
  * FW versions support BA 11n
  * versions marks x.x.x.50-60.x
@@ -45,73 +42,6 @@
 #define WL12XX_BA_SUPPORT_FW_COST_VER2_START    50
 #define WL12XX_BA_SUPPORT_FW_COST_VER2_END      60
 
-enum {
-	DEBUG_NONE	= 0,
-	DEBUG_IRQ	= BIT(0),
-	DEBUG_SPI	= BIT(1),
-	DEBUG_BOOT	= BIT(2),
-	DEBUG_MAILBOX	= BIT(3),
-	DEBUG_TESTMODE	= BIT(4),
-	DEBUG_EVENT	= BIT(5),
-	DEBUG_TX	= BIT(6),
-	DEBUG_RX	= BIT(7),
-	DEBUG_SCAN	= BIT(8),
-	DEBUG_CRYPT	= BIT(9),
-	DEBUG_PSM	= BIT(10),
-	DEBUG_MAC80211	= BIT(11),
-	DEBUG_CMD	= BIT(12),
-	DEBUG_ACX	= BIT(13),
-	DEBUG_SDIO	= BIT(14),
-	DEBUG_FILTERS   = BIT(15),
-	DEBUG_ADHOC     = BIT(16),
-	DEBUG_AP	= BIT(17),
-	DEBUG_MASTER	= (DEBUG_ADHOC | DEBUG_AP),
-	DEBUG_ALL	= ~0,
-};
-
-extern u32 wl12xx_debug_level;
-
-#define DEBUG_DUMP_LIMIT 1024
-
-#define wl1271_error(fmt, arg...) \
-	pr_err(DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
-
-#define wl1271_warning(fmt, arg...) \
-	pr_warning(DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
-
-#define wl1271_notice(fmt, arg...) \
-	pr_info(DRIVER_PREFIX fmt "\n", ##arg)
-
-#define wl1271_info(fmt, arg...) \
-	pr_info(DRIVER_PREFIX fmt "\n", ##arg)
-
-#define wl1271_debug(level, fmt, arg...) \
-	do { \
-		if (level & wl12xx_debug_level) \
-			pr_debug(DRIVER_PREFIX fmt "\n", ##arg); \
-	} while (0)
-
-/* TODO: use pr_debug_hex_dump when it will be available */
-#define wl1271_dump(level, prefix, buf, len)	\
-	do { \
-		if (level & wl12xx_debug_level) \
-			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
-				       DUMP_PREFIX_OFFSET, 16, 1,	\
-				       buf,				\
-				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
-				       0);				\
-	} while (0)
-
-#define wl1271_dump_ascii(level, prefix, buf, len)	\
-	do { \
-		if (level & wl12xx_debug_level) \
-			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
-				       DUMP_PREFIX_OFFSET, 16, 1,	\
-				       buf,				\
-				       min_t(size_t, len, DEBUG_DUMP_LIMIT), \
-				       true);				\
-	} while (0)
-
 #define WL127X_FW_NAME "ti-connectivity/wl127x-fw-3.bin"
 #define WL128X_FW_NAME "ti-connectivity/wl128x-fw-3.bin"