Commit 0f901dcb authored by Andrey Ryabinin's avatar Andrey Ryabinin Committed by Linus Torvalds

mm/kasan: don't vfree() nonexistent vm_area

KASAN uses different routines to map shadow for hot added memory and
memory obtained in boot process.  Attempt to offline memory onlined by
normal boot process leads to this:

    Trying to vfree() nonexistent vm area (000000005d3b34b9)
    WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190

    Call Trace:
     kasan_mem_notifier+0xad/0xb9
     notifier_call_chain+0x166/0x260
     __blocking_notifier_call_chain+0xdb/0x140
     __offline_pages+0x96a/0xb10
     memory_subsys_offline+0x76/0xc0
     device_offline+0xb8/0x120
     store_mem_state+0xfa/0x120
     kernfs_fop_write+0x1d5/0x320
     __vfs_write+0xd4/0x530
     vfs_write+0x105/0x340
     SyS_write+0xb0/0x140

Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc().  Use find_vm_area() to see if we can call vfree().

Unfortunately it's a bit tricky to properly unmap and free shadow
allocated during boot, so we'll have to keep it.  If memory will come
online again that shadow will be reused.

Matthew asked: how can you call vfree() on something that isn't a
vmalloc address?

  vfree() is able to free any address returned by
  __vmalloc_node_range().  And __vmalloc_node_range() gives you any
  address you ask.  It doesn't have to be an address in [VMALLOC_START,
  VMALLOC_END] range.

  That's also how the module_alloc()/module_memfree() works on
  architectures that have designated area for modules.

[aryabinin@virtuozzo.com: improve comments]
  Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com
[akpm@linux-foundation.org: fix typos, reflow comment]
Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com
Fixes: fa69b598 ("mm/kasan: add support for memory hotplug")
Signed-off-by: default avatarAndrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: default avatarPaul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent b9ddff9b
......@@ -792,6 +792,40 @@ DEFINE_ASAN_SET_SHADOW(f5);
DEFINE_ASAN_SET_SHADOW(f8);
#ifdef CONFIG_MEMORY_HOTPLUG
static bool shadow_mapped(unsigned long addr)
{
pgd_t *pgd = pgd_offset_k(addr);
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
if (pgd_none(*pgd))
return false;
p4d = p4d_offset(pgd, addr);
if (p4d_none(*p4d))
return false;
pud = pud_offset(p4d, addr);
if (pud_none(*pud))
return false;
/*
* We can't use pud_large() or pud_huge(), the first one is
* arch-specific, the last one depends on HUGETLB_PAGE. So let's abuse
* pud_bad(), if pud is bad then it's bad because it's huge.
*/
if (pud_bad(*pud))
return true;
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return false;
if (pmd_bad(*pmd))
return true;
pte = pte_offset_kernel(pmd, addr);
return !pte_none(*pte);
}
static int __meminit kasan_mem_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
......@@ -813,6 +847,14 @@ static int __meminit kasan_mem_notifier(struct notifier_block *nb,
case MEM_GOING_ONLINE: {
void *ret;
/*
* If shadow is mapped already than it must have been mapped
* during the boot. This could happen if we onlining previously
* offlined memory.
*/
if (shadow_mapped(shadow_start))
return NOTIFY_OK;
ret = __vmalloc_node_range(shadow_size, PAGE_SIZE, shadow_start,
shadow_end, GFP_KERNEL,
PAGE_KERNEL, VM_NO_GUARD,
......@@ -824,8 +866,25 @@ static int __meminit kasan_mem_notifier(struct notifier_block *nb,
kmemleak_ignore(ret);
return NOTIFY_OK;
}
case MEM_OFFLINE:
vfree((void *)shadow_start);
case MEM_OFFLINE: {
struct vm_struct *vm;
/*
* shadow_start was either mapped during boot by kasan_init()
* or during memory online by __vmalloc_node_range().
* In the latter case we can use vfree() to free shadow.
* Non-NULL result of the find_vm_area() will tell us if
* that was the second case.
*
* Currently it's not possible to free shadow mapped
* during boot by kasan_init(). It's because the code
* to do that hasn't been written yet. So we'll just
* leak the memory.
*/
vm = find_vm_area((void *)shadow_start);
if (vm)
vfree((void *)shadow_start);
}
}
return NOTIFY_OK;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment