Commit 1009aa12 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'riscv-for-linus-4.19-mw0' of...

Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
parents 1d0926e9 627672cf
RISC-V Hart-Level Interrupt Controller (HLIC)
---------------------------------------------
RISC-V cores include Control Status Registers (CSRs) which are local to each
CPU core (HART in RISC-V terminology) and can be read or written by software.
Some of these CSRs are used to control local interrupts connected to the core.
Every interrupt is ultimately routed through a hart's HLIC before it
interrupts that hart.
The RISC-V supervisor ISA manual specifies three interrupt sources that are
attached to every HLIC: software interrupts, the timer interrupt, and external
interrupts. Software interrupts are used to send IPIs between cores. The
timer interrupt comes from an architecturally mandated real-time timer that is
controller via Supervisor Binary Interface (SBI) calls and CSR reads. External
interrupts connect all other device interrupts to the HLIC, which are routed
via the platform-level interrupt controller (PLIC).
All RISC-V systems that conform to the supervisor ISA specification are
required to have a HLIC with these three interrupt sources present. Since the
interrupt map is defined by the ISA it's not listed in the HLIC's device tree
entry, though external interrupt controllers (like the PLIC, for example) will
need to define how their interrupts map to the relevant HLICs. This means
a PLIC interrupt property will typically list the HLICs for all present HARTs
in the system.
Required properties:
- compatible : "riscv,cpu-intc"
- #interrupt-cells : should be <1>
- interrupt-controller : Identifies the node as an interrupt controller
Furthermore, this interrupt-controller MUST be embedded inside the cpu
definition of the hart whose CSRs control these local interrupts.
An example device tree entry for a HLIC is show below.
cpu1: cpu@1 {
compatible = "riscv";
...
cpu1-intc: interrupt-controller {
#interrupt-cells = <1>;
compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
interrupt-controller;
};
};
SiFive Platform-Level Interrupt Controller (PLIC)
-------------------------------------------------
SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
(PLIC) high-level specification in the RISC-V Privileged Architecture
specification. The PLIC connects all external interrupts in the system to all
hart contexts in the system, via the external interrupt source in each hart.
A hart context is a privilege mode in a hardware execution thread. For example,
in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
privilege modes per hart; machine mode and supervisor mode.
Each interrupt can be enabled on per-context basis. Any context can claim
a pending enabled interrupt and then release it once it has been handled.
Each interrupt has a configurable priority. Higher priority interrupts are
serviced first. Each context can specify a priority threshold. Interrupts
with priority below this threshold will not cause the PLIC to raise its
interrupt line leading to the context.
While the PLIC supports both edge-triggered and level-triggered interrupts,
interrupt handlers are oblivious to this distinction and therefore it is not
specified in the PLIC device-tree binding.
While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
contains a specific memory layout, which is documented in chapter 8 of the
SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
Required properties:
- compatible : "sifive,plic-1.0.0" and a string identifying the actual
detailed implementation in case that specific bugs need to be worked around.
- #address-cells : should be <0> or more.
- #interrupt-cells : should be <1> or more.
- interrupt-controller : Identifies the node as an interrupt controller.
- reg : Should contain 1 register range (address and length).
- interrupts-extended : Specifies which contexts are connected to the PLIC,
with "-1" specifying that a context is not present. Each node pointed
to should be a riscv,cpu-intc node, which has a riscv node as parent.
- riscv,ndev: Specifies how many external interrupts are supported by
this controller.
Example:
plic: interrupt-controller@c000000 {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic";
interrupt-controller;
interrupts-extended = <
&cpu0-intc 11
&cpu1-intc 11 &cpu1-intc 9
&cpu2-intc 11 &cpu2-intc 9
&cpu3-intc 11 &cpu3-intc 9
&cpu4-intc 11 &cpu4-intc 9>;
reg = <0xc000000 0x4000000>;
riscv,ndev = <10>;
};
......@@ -25,6 +25,9 @@ ifeq ($(CONFIG_ARCH_RV64I),y)
KBUILD_CFLAGS += -mabi=lp64
KBUILD_AFLAGS += -mabi=lp64
KBUILD_CFLAGS += $(call cc-ifversion, -ge, 0500, -DCONFIG_ARCH_SUPPORTS_INT128)
KBUILD_MARCH = rv64im
LDFLAGS += -melf64lriscv
else
......
......@@ -76,3 +76,4 @@ CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_SIFIVE_PLIC=y
......@@ -54,6 +54,7 @@
/* Interrupt Enable and Interrupt Pending flags */
#define SIE_SSIE _AC(0x00000002, UL) /* Software Interrupt Enable */
#define SIE_STIE _AC(0x00000020, UL) /* Timer Interrupt Enable */
#define SIE_SEIE _AC(0x00000200, UL) /* External Interrupt Enable */
#define EXC_INST_MISALIGNED 0
#define EXC_INST_ACCESS 1
......
......@@ -17,11 +17,8 @@
#define NR_IRQS 0
#define INTERRUPT_CAUSE_SOFTWARE 1
#define INTERRUPT_CAUSE_TIMER 5
#define INTERRUPT_CAUSE_EXTERNAL 9
void riscv_timer_interrupt(void);
void riscv_software_interrupt(void);
#include <asm-generic/irq.h>
......
......@@ -10,6 +10,7 @@
#include <linux/perf_event.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#define RISCV_BASE_COUNTERS 2
......
......@@ -24,9 +24,6 @@
#ifdef CONFIG_SMP
/* SMP initialization hook for setup_arch */
void __init init_clockevent(void);
/* SMP initialization hook for setup_arch */
void __init setup_smp(void);
......@@ -44,9 +41,6 @@ void arch_send_call_function_single_ipi(int cpu);
*/
#define raw_smp_processor_id() (*((int*)((char*)get_current() + TASK_TI_CPU)))
/* Interprocessor interrupt handler */
irqreturn_t handle_ipi(void);
#endif /* CONFIG_SMP */
#endif /* _ASM_RISCV_SMP_H */
......@@ -168,8 +168,8 @@ ENTRY(handle_exception)
/* Handle interrupts */
move a0, sp /* pt_regs */
REG_L a1, handle_arch_irq
jr a1
move a1, s4 /* scause */
tail do_IRQ
1:
/* Exceptions run with interrupts enabled */
csrs sstatus, SR_SIE
......
......@@ -94,6 +94,7 @@ relocate:
or a0, a0, a1
sfence.vma
csrw sptbr, a0
.align 2
1:
/* Set trap vector to spin forever to help debug */
la a0, .Lsecondary_park
......@@ -143,6 +144,7 @@ relocate:
tail smp_callin
#endif
.align 2
.Lsecondary_park:
/* We lack SMP support or have too many harts, so park this hart */
wfi
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2017 SiFive
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* Copyright (C) 2018 Christoph Hellwig
*/
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
/*
* Possible interrupt causes:
*/
#define INTERRUPT_CAUSE_SOFTWARE 1
#define INTERRUPT_CAUSE_TIMER 5
#define INTERRUPT_CAUSE_EXTERNAL 9
/*
* The high order bit of the trap cause register is always set for
* interrupts, which allows us to differentiate them from exceptions
* quickly. The INTERRUPT_CAUSE_* macros don't contain that bit, so we
* need to mask it off.
*/
#define INTERRUPT_CAUSE_FLAG (1UL << (__riscv_xlen - 1))
asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs, unsigned long cause)
{
struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
switch (cause & ~INTERRUPT_CAUSE_FLAG) {
case INTERRUPT_CAUSE_TIMER:
riscv_timer_interrupt();
break;
#ifdef CONFIG_SMP
case INTERRUPT_CAUSE_SOFTWARE:
/*
* We only use software interrupts to pass IPIs, so if a non-SMP
* system gets one, then we don't know what to do.
*/
riscv_software_interrupt();
break;
#endif
case INTERRUPT_CAUSE_EXTERNAL:
handle_arch_irq(regs);
break;
default:
panic("unexpected interrupt cause");
}
irq_exit();
set_irq_regs(old_regs);
}
void __init init_IRQ(void)
{
irqchip_init();
......
......@@ -27,7 +27,6 @@
#include <linux/mutex.h>
#include <linux/bitmap.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/perf_event.h>
#include <linux/atomic.h>
#include <linux/of.h>
......
......@@ -39,6 +39,27 @@
#include <asm/tlbflush.h>
#include <asm/thread_info.h>
#ifdef CONFIG_EARLY_PRINTK
static void sbi_console_write(struct console *co, const char *buf,
unsigned int n)
{
int i;
for (i = 0; i < n; ++i) {
if (buf[i] == '\n')
sbi_console_putchar('\r');
sbi_console_putchar(buf[i]);
}
}
struct console riscv_sbi_early_console_dev __initdata = {
.name = "early",
.write = sbi_console_write,
.flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME,
.index = -1
};
#endif
#ifdef CONFIG_DUMMY_CONSOLE
struct screen_info screen_info = {
.orig_video_lines = 30,
......@@ -195,6 +216,12 @@ static void __init setup_bootmem(void)
void __init setup_arch(char **cmdline_p)
{
#if defined(CONFIG_EARLY_PRINTK)
if (likely(early_console == NULL)) {
early_console = &riscv_sbi_early_console_dev;
register_console(early_console);
}
#endif
*cmdline_p = boot_command_line;
parse_early_param();
......
......@@ -45,7 +45,7 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
}
irqreturn_t handle_ipi(void)
void riscv_software_interrupt(void)
{
unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
......@@ -60,7 +60,7 @@ irqreturn_t handle_ipi(void)
ops = xchg(pending_ipis, 0);
if (ops == 0)
return IRQ_HANDLED;
return;
if (ops & (1 << IPI_RESCHEDULE))
scheduler_ipi();
......@@ -73,8 +73,6 @@ irqreturn_t handle_ipi(void)
/* Order data access and bit testing. */
mb();
}
return IRQ_HANDLED;
}
static void
......
......@@ -104,7 +104,6 @@ asmlinkage void __init smp_callin(void)
current->active_mm = mm;
trap_init();
init_clockevent();
notify_cpu_starting(smp_processor_id());
set_cpu_online(smp_processor_id(), 1);
local_flush_tlb_all();
......
......@@ -13,38 +13,11 @@
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
#ifdef CONFIG_RISCV_TIMER
#include <linux/timer_riscv.h>
#endif
#include <asm/sbi.h>
unsigned long riscv_timebase;
DECLARE_PER_CPU(struct clock_event_device, riscv_clock_event);
void riscv_timer_interrupt(void)
{
#ifdef CONFIG_RISCV_TIMER
/*
* FIXME: This needs to be cleaned up along with the rest of the IRQ
* handling cleanup. See irq.c for more details.
*/
struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
evdev->event_handler(evdev);
#endif
}
void __init init_clockevent(void)
{
timer_probe();
csr_set(sie, SIE_STIE);
}
void __init time_init(void)
{
struct device_node *cpu;
......@@ -56,6 +29,5 @@ void __init time_init(void)
riscv_timebase = prop;
lpj_fine = riscv_timebase / HZ;
init_clockevent();
timer_probe();
}
......@@ -138,7 +138,6 @@ asmlinkage void do_trap_break(struct pt_regs *regs)
#endif /* CONFIG_GENERIC_BUG */
force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)(regs->sepc), current);
regs->sepc += 0x4;
}
#ifdef CONFIG_GENERIC_BUG
......
......@@ -52,8 +52,8 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
# Add -lgcc so rv32 gets static muldi3 and lshrdi3 definitions.
# Make sure only to export the intended __vdso_xxx symbol offsets.
quiet_cmd_vdsold = VDSOLD $@
cmd_vdsold = $(CC) $(KCFLAGS) $(call cc-option, -no-pie) -nostdlib $(SYSCFLAGS_$(@F)) \
-Wl,-T,$(filter-out FORCE,$^) -o $@.tmp -lgcc && \
cmd_vdsold = $(CC) $(KBUILD_CFLAGS) $(call cc-option, -no-pie) -nostdlib -nostartfiles $(SYSCFLAGS_$(@F)) \
-Wl,-T,$(filter-out FORCE,$^) -o $@.tmp && \
$(CROSS_COMPILE)objcopy \
$(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@
......
......@@ -2,5 +2,6 @@ lib-y += delay.o
lib-y += memcpy.o
lib-y += memset.o
lib-y += uaccess.o
lib-y += tishift.o
lib-$(CONFIG_32BIT) += udivdi3.o
/*
* Copyright (C) 2018 Free Software Foundation, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
.globl __lshrti3
__lshrti3:
beqz a2, .L1
li a5,64
sub a5,a5,a2
addi sp,sp,-16
sext.w a4,a5
blez a5, .L2
sext.w a2,a2
sll a4,a1,a4
srl a0,a0,a2
srl a1,a1,a2
or a0,a0,a4
sd a1,8(sp)
sd a0,0(sp)
ld a0,0(sp)
ld a1,8(sp)
addi sp,sp,16
ret
.L1:
ret
.L2:
negw a4,a4
srl a1,a1,a4
sd a1,0(sp)
sd zero,8(sp)
ld a0,0(sp)
ld a1,8(sp)
addi sp,sp,16
ret
......@@ -609,4 +609,15 @@ config ATCPIT100_TIMER
help
This option enables support for the Andestech ATCPIT100 timers.
config RISCV_TIMER
bool "Timer for the RISC-V platform"
depends on RISCV
default y
select TIMER_PROBE
select TIMER_OF
help
This enables the per-hart timer built into all RISC-V systems, which
is accessed via both the SBI and the rdcycle instruction. This is
required for all RISC-V systems.
endmenu
......@@ -78,3 +78,4 @@ obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2017 SiFive
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <asm/sbi.h>
/*
* All RISC-V systems have a timer attached to every hart. These timers can be
* read by the 'rdcycle' pseudo instruction, and can use the SBI to setup
* events. In order to abstract the architecture-specific timer reading and
* setting functions away from the clock event insertion code, we provide
* function pointers to the clockevent subsystem that perform two basic
* operations: rdtime() reads the timer on the current CPU, and
* next_event(delta) sets the next timer event to 'delta' cycles in the future.
* As the timers are inherently a per-cpu resource, these callbacks perform
* operations on the current hart. There is guaranteed to be exactly one timer
* per hart on all RISC-V systems.
*/
static int riscv_clock_next_event(unsigned long delta,
struct clock_event_device *ce)
{
csr_set(sie, SIE_STIE);
sbi_set_timer(get_cycles64() + delta);
return 0;
}
static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
.name = "riscv_timer_clockevent",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 100,
.set_next_event = riscv_clock_next_event,
};
/*
* It is guaranteed that all the timers across all the harts are synchronized
* within one tick of each other, so while this could technically go
* backwards when hopping between CPUs, practically it won't happen.
*/
static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs)
{
return get_cycles64();
}
static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = {
.name = "riscv_clocksource",
.rating = 300,
.mask = CLOCKSOURCE_MASK(BITS_PER_LONG),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = riscv_clocksource_rdtime,
};
static int riscv_timer_starting_cpu(unsigned int cpu)
{
struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu);
ce->cpumask = cpumask_of(cpu);
clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
csr_set(sie, SIE_STIE);
return 0;
}
static int riscv_timer_dying_cpu(unsigned int cpu)
{
csr_clear(sie, SIE_STIE);
return 0;
}
/* called directly from the low-level interrupt handler */
void riscv_timer_interrupt(void)
{
struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
csr_clear(sie, SIE_STIE);
evdev->event_handler(evdev);
}
static int __init riscv_timer_init_dt(struct device_node *n)
{
int cpu_id = riscv_of_processor_hart(n), error;
struct clocksource *cs;
if (cpu_id != smp_processor_id())
return 0;
cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
clocksource_register_hz(cs, riscv_timebase);
error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
"clockevents/riscv/timer:starting",
riscv_timer_starting_cpu, riscv_timer_dying_cpu);
if (error)
pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
error, cpu_id);
return error;
}
TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);
......@@ -372,3 +372,15 @@ config QCOM_PDC
IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
endmenu
config SIFIVE_PLIC
bool "SiFive Platform-Level Interrupt Controller"
depends on RISCV
help
This enables support for the PLIC chip found in SiFive (and
potentially other) RISC-V systems. The PLIC controls devices
interrupts and connects them to each core's local interrupt
controller. Aside from timer and software interrupts, all other
interrupt sources are subordinate to the PLIC.
If you don't know what to do here, say Y.
......@@ -87,3 +87,4 @@ obj-$(CONFIG_MESON_IRQ_GPIO) += irq-meson-gpio.o
obj-$(CONFIG_GOLDFISH_PIC) += irq-goldfish-pic.o
obj-$(CONFIG_NDS32) += irq-ativic32.o
obj-$(CONFIG_QCOM_PDC) += qcom-pdc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2017 SiFive
* Copyright (C) 2018 Christoph Hellwig
*/
#define pr_fmt(fmt) "plic: " fmt
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
/*
* This driver implements a version of the RISC-V PLIC with the actual layout
* specified in chapter 8 of the SiFive U5 Coreplex Series Manual:
*
* https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
*
* The largest number supported by devices marked as 'sifive,plic-1.0.0', is
* 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
* Spec.
*/
#define MAX_DEVICES 1024
#define MAX_CONTEXTS 15872
/*
* Each interrupt source has a priority register associated with it.
* We always hardwire it to one in Linux.
*/
#define PRIORITY_BASE 0
#define PRIORITY_PER_ID 4
/*
* Each hart context has a vector of interrupt enable bits associated with it.
* There's one bit for each interrupt source.
*/
#define ENABLE_BASE 0x2000
#define ENABLE_PER_HART 0x80
/*
* Each hart context has a set of control registers associated with it. Right
* now there's only two: a source priority threshold over which the hart will
* take an interrupt, and a register to claim interrupts.
*/
#define CONTEXT_BASE 0x200000
#define CONTEXT_PER_HART 0x1000
#define CONTEXT_THRESHOLD 0x00
#define CONTEXT_CLAIM 0x04
static void __iomem *plic_regs;
struct plic_handler {
bool present;
int ctxid;
};
static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
static inline void __iomem *plic_hart_offset(int ctxid)
{
return plic_regs + CONTEXT_BASE + ctxid * CONTEXT_PER_HART;
}
static inline u32 __iomem *plic_enable_base(int ctxid)
{
return plic_regs + ENABLE_BASE + ctxid * ENABLE_PER_HART;
}
/*
* Protect mask operations on the registers given that we can't assume that
* atomic memory operations work on them.
*/
static DEFINE_RAW_SPINLOCK(plic_toggle_lock);
static inline void plic_toggle(int ctxid, int hwirq, int enable)
{
u32 __iomem *reg = plic_enable_base(ctxid) + (hwirq / 32);
u32 hwirq_mask = 1 << (hwirq % 32);
raw_spin_lock(&plic_toggle_lock);
if (enable)
writel(readl(reg) | hwirq_mask, reg);
else
writel(readl(reg) & ~hwirq_mask, reg);
raw_spin_unlock(&plic_toggle_lock);
}
static inline void plic_irq_toggle(struct irq_data *d, int enable)
{
int cpu;
writel(enable, plic_regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
for_each_cpu(cpu, irq_data_get_affinity_mask(d)) {
struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
if (handler->present)
plic_toggle(handler->ctxid, d->hwirq, enable);
}
}
static void plic_irq_enable(struct irq_data *d)
{
plic_irq_toggle(d, 1);
}
static void plic_irq_disable(struct irq_data *d)
{
plic_irq_toggle(d, 0);
}
static struct irq_chip plic_chip = {
.name = "SiFive PLIC",
/*
* There is no need to mask/unmask PLIC interrupts. They are "masked"
* by reading claim and "unmasked" when writing it back.
*/
.irq_enable = plic_irq_enable,
.irq_disable = plic_irq_disable,
};
static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &plic_chip, handle_simple_irq);
irq_set_chip_data(irq, NULL);
irq_set_noprobe(irq);
return 0;
}
static const struct irq_domain_ops plic_irqdomain_ops = {
.map = plic_irqdomain_map,
.xlate = irq_domain_xlate_onecell,
};
static struct irq_domain *plic_irqdomain;
/*
* Handling an interrupt is a two-step process: first you claim the interrupt
* by reading the claim register, then you complete the interrupt by writing
* that source ID back to the same claim register. This automatically enables
* and disables the interrupt, so there's nothing else to do.
*/
static void plic_handle_irq(struct pt_regs *regs)
{
struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
void __iomem *claim = plic_hart_offset(handler->ctxid) + CONTEXT_CLAIM;
irq_hw_number_t hwirq;
WARN_ON_ONCE(!handler->present);
csr_clear(sie, SIE_SEIE);
while ((hwirq = readl(claim))) {
int irq = irq_find_mapping(plic_irqdomain, hwirq);
if (unlikely(irq <= 0))
pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
hwirq);
else
generic_handle_irq(irq);
writel(hwirq, claim);
}
csr_set(sie, SIE_SEIE);
}
/*
* Walk up the DT tree until we find an active RISC-V core (HART) node and
* extract the cpuid from it.
*/
static int plic_find_hart_id(struct device_node *node)
{
for (; node; node = node->parent) {
if (of_device_is_compatible(node, "riscv"))
return riscv_of_processor_hart(node);
}
return -1;
}
static int __init plic_init(struct device_node *node,
struct device_node *parent)
{
int error = 0, nr_handlers, nr_mapped = 0, i;
u32 nr_irqs;
if (plic_regs) {
pr_warn("PLIC already present.\n");
return -ENXIO;
}
plic_regs = of_iomap(node, 0);
if (WARN_ON(!plic_regs))
return -EIO;
error = -EINVAL;
of_property_read_u32(node, "riscv,ndev", &nr_irqs);
if (WARN_ON(!nr_irqs))
goto out_iounmap;
nr_handlers = of_irq_count(node);
if (WARN_ON(!nr_handlers))
goto out_iounmap;
if (WARN_ON(nr_handlers < num_possible_cpus()))
goto out_iounmap;
error = -ENOMEM;
plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
&plic_irqdomain_ops, NULL);
if (WARN_ON(!plic_irqdomain))
goto out_iounmap;
for (i = 0; i < nr_handlers; i++) {
struct of_phandle_args parent;
struct plic_handler *handler;
irq_hw_number_t hwirq;
int cpu;
if (of_irq_parse_one(node, i, &parent)) {
pr_err("failed to parse parent for context %d.\n", i);
continue;
}
/* skip context holes */
if (parent.args[0] == -1)
continue;
cpu = plic_find_hart_id(parent.np);
if (cpu < 0) {
pr_warn("failed to parse hart ID for context %d.\n", i);
continue;
}
handler = per_cpu_ptr(&plic_handlers, cpu);
handler->present = true;
handler->ctxid = i;
/* priority must be > threshold to trigger an interrupt */
writel(0, plic_hart_offset(i) + CONTEXT_THRESHOLD);
for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
plic_toggle(i, hwirq, 0);
nr_mapped++;
}
pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
nr_irqs, nr_mapped, nr_handlers);
set_handle_irq(plic_handle_irq);
return 0;
out_iounmap:
iounmap(plic_regs);
return error;
}
IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
......@@ -125,6 +125,7 @@ enum cpuhp_state {
CPUHP_AP_MARCO_TIMER_STARTING,
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
CPUHP_AP_RISCV_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
CPUHP_AP_KVM_ARM_VGIC_STARTING,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment