Skip to content

L
linux
Commit 10343cca authored by Benjamin Li's avatar Benjamin Li Committed by David S. Miller
Browse files
Options

bnx2: Pre-initialize struct cpu_reg. 

Instead of assigning values for the struct cpu_reg's at runtime,
we already know these values at compile time.  Therefore, we can use
designated initializers, to initialize these structures and not have
to incur this assignment cost at run-time.
Signed-off-by: default avatarBenjamin Li <benli@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 601d3d18
Hide whitespace changes
Inline Side-by-side
Showing with 86 additions and 72 deletions
drivers/net/bnx2.c
View file @ 10343cca
......@@ -3219,7 +3219,7 @@ load_rv2p_fw(struct bnx2 *bp, __le32 *rv2p_code, u32 rv2p_code_len,
}
static int
load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw)
load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg, struct fw_info *fw)
{
u32 offset;
u32 val;
......@@ -3303,7 +3303,6 @@ load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw)
static int
bnx2_init_cpus(struct bnx2 *bp)
{
struct cpu_reg cpu_reg;
struct fw_info *fw;
int rc, rv2p_len;
void *text, *rv2p;
......@@ -3339,122 +3338,57 @@ bnx2_init_cpus(struct bnx2 *bp)
load_rv2p_fw(bp, text, rc /* == len */, RV2P_PROC2);
/* Initialize the RX Processor. */
cpu_reg.mode = BNX2_RXP_CPU_MODE;
cpu_reg.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX2_RXP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX2_RXP_CPU_REG_FILE;
cpu_reg.evmask = BNX2_RXP_CPU_EVENT_MASK;
cpu_reg.pc = BNX2_RXP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX2_RXP_CPU_INSTRUCTION;
cpu_reg.bp = BNX2_RXP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX2_RXP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
if (CHIP_NUM(bp) == CHIP_NUM_5709)
fw = &bnx2_rxp_fw_09;
else
fw = &bnx2_rxp_fw_06;
fw->text = text;
rc = load_cpu_fw(bp, &cpu_reg, fw);
rc = load_cpu_fw(bp, &cpu_reg_rxp, fw);
if (rc)
goto init_cpu_err;
/* Initialize the TX Processor. */
cpu_reg.mode = BNX2_TXP_CPU_MODE;
cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX2_TXP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX2_TXP_CPU_REG_FILE;
cpu_reg.evmask = BNX2_TXP_CPU_EVENT_MASK;
cpu_reg.pc = BNX2_TXP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX2_TXP_CPU_INSTRUCTION;
cpu_reg.bp = BNX2_TXP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX2_TXP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
if (CHIP_NUM(bp) == CHIP_NUM_5709)
fw = &bnx2_txp_fw_09;
else
fw = &bnx2_txp_fw_06;
fw->text = text;
rc = load_cpu_fw(bp, &cpu_reg, fw);
rc = load_cpu_fw(bp, &cpu_reg_txp, fw);
if (rc)
goto init_cpu_err;
/* Initialize the TX Patch-up Processor. */
cpu_reg.mode = BNX2_TPAT_CPU_MODE;
cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX2_TPAT_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX2_TPAT_CPU_REG_FILE;
cpu_reg.evmask = BNX2_TPAT_CPU_EVENT_MASK;
cpu_reg.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX2_TPAT_CPU_INSTRUCTION;
cpu_reg.bp = BNX2_TPAT_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX2_TPAT_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
if (CHIP_NUM(bp) == CHIP_NUM_5709)
fw = &bnx2_tpat_fw_09;
else
fw = &bnx2_tpat_fw_06;
fw->text = text;
rc = load_cpu_fw(bp, &cpu_reg, fw);
rc = load_cpu_fw(bp, &cpu_reg_tpat, fw);
if (rc)
goto init_cpu_err;
/* Initialize the Completion Processor. */
cpu_reg.mode = BNX2_COM_CPU_MODE;
cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX2_COM_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX2_COM_CPU_REG_FILE;
cpu_reg.evmask = BNX2_COM_CPU_EVENT_MASK;
cpu_reg.pc = BNX2_COM_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX2_COM_CPU_INSTRUCTION;
cpu_reg.bp = BNX2_COM_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX2_COM_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
if (CHIP_NUM(bp) == CHIP_NUM_5709)
fw = &bnx2_com_fw_09;
else
fw = &bnx2_com_fw_06;
fw->text = text;
rc = load_cpu_fw(bp, &cpu_reg, fw);
rc = load_cpu_fw(bp, &cpu_reg_com, fw);
if (rc)
goto init_cpu_err;
/* Initialize the Command Processor. */
cpu_reg.mode = BNX2_CP_CPU_MODE;
cpu_reg.mode_value_halt = BNX2_CP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BNX2_CP_CPU_MODE_STEP_ENA;
cpu_reg.state = BNX2_CP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BNX2_CP_CPU_REG_FILE;
cpu_reg.evmask = BNX2_CP_CPU_EVENT_MASK;
cpu_reg.pc = BNX2_CP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BNX2_CP_CPU_INSTRUCTION;
cpu_reg.bp = BNX2_CP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BNX2_CP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
if (CHIP_NUM(bp) == CHIP_NUM_5709)
fw = &bnx2_cp_fw_09;
else
fw = &bnx2_cp_fw_06;
fw->text = text;
rc = load_cpu_fw(bp, &cpu_reg, fw);
rc = load_cpu_fw(bp, &cpu_reg_cp, fw);
init_cpu_err:
vfree(text);
......
drivers/net/bnx2_fw.h
View file @ 10343cca
......@@ -886,6 +886,23 @@ static struct fw_info bnx2_com_fw_06 = {
.rodata = bnx2_COM_b06FwRodata,
};
/* Initialized Values for the Completion Processor. */
static const struct cpu_reg cpu_reg_com = {
.mode = BNX2_COM_CPU_MODE,
.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT,
.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA,
.state = BNX2_COM_CPU_STATE,
.state_value_clear = 0xffffff,
.gpr0 = BNX2_COM_CPU_REG_FILE,
.evmask = BNX2_COM_CPU_EVENT_MASK,
.pc = BNX2_COM_CPU_PROGRAM_COUNTER,
.inst = BNX2_COM_CPU_INSTRUCTION,
.bp = BNX2_COM_CPU_HW_BREAKPOINT,
.spad_base = BNX2_COM_SCRATCH,
.mips_view_base = 0x8000000,
};
static u8 bnx2_CP_b06FwText[] = {
0x9d, 0xbc, 0x0d, 0x78, 0x13, 0xe7, 0x99, 0x2e, 0x7c, 0xcf, 0x48, 0xb2,
0x65, 0x5b, 0xb6, 0xc7, 0xb6, 0x0c, 0x22, 0x65, 0x41, 0x83, 0x47, 0x20,
......@@ -2167,6 +2184,22 @@ static struct fw_info bnx2_cp_fw_06 = {
.rodata = bnx2_CP_b06FwRodata,
};
/* Initialized Values the Command Processor. */
static const struct cpu_reg cpu_reg_cp = {
.mode = BNX2_CP_CPU_MODE,
.mode_value_halt = BNX2_CP_CPU_MODE_SOFT_HALT,
.mode_value_sstep = BNX2_CP_CPU_MODE_STEP_ENA,
.state = BNX2_CP_CPU_STATE,
.state_value_clear = 0xffffff,
.gpr0 = BNX2_CP_CPU_REG_FILE,
.evmask = BNX2_CP_CPU_EVENT_MASK,
.pc = BNX2_CP_CPU_PROGRAM_COUNTER,
.inst = BNX2_CP_CPU_INSTRUCTION,
.bp = BNX2_CP_CPU_HW_BREAKPOINT,
.spad_base = BNX2_CP_SCRATCH,
.mips_view_base = 0x8000000,
};
static u8 bnx2_RXP_b06FwText[] = {
0xec, 0x5b, 0x5d, 0x70, 0x5c, 0xd7, 0x5d, 0xff, 0xdf, 0xb3, 0x2b, 0x69,
0x2d, 0x4b, 0xf2, 0x95, 0xbc, 0x71, 0x56, 0xa9, 0x92, 0xec, 0x5a, 0x57,
......@@ -2946,6 +2979,22 @@ static struct fw_info bnx2_rxp_fw_06 = {
.rodata = bnx2_RXP_b06FwRodata,
};
/* Initialized Values for the RX Processor. */
static const struct cpu_reg cpu_reg_rxp = {
.mode = BNX2_RXP_CPU_MODE,
.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT,
.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA,
.state = BNX2_RXP_CPU_STATE,
.state_value_clear = 0xffffff,
.gpr0 = BNX2_RXP_CPU_REG_FILE,
.evmask = BNX2_RXP_CPU_EVENT_MASK,
.pc = BNX2_RXP_CPU_PROGRAM_COUNTER,
.inst = BNX2_RXP_CPU_INSTRUCTION,
.bp = BNX2_RXP_CPU_HW_BREAKPOINT,
.spad_base = BNX2_RXP_SCRATCH,
.mips_view_base = 0x8000000,
};
static u8 bnx2_rv2p_proc1[] = {
/* Date: 12/07/2007 15:02 */
0xd5, 0x56, 0x41, 0x6b, 0x13, 0x51, 0x10, 0x9e, 0xdd, 0x6c, 0xbb, 0xdb,
......@@ -3651,6 +3700,22 @@ static struct fw_info bnx2_tpat_fw_06 = {
.rodata = bnx2_TPAT_b06FwRodata,
};
/* Initialized Values for the TX Patch-up Processor. */
static const struct cpu_reg cpu_reg_tpat = {
.mode = BNX2_TPAT_CPU_MODE,
.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT,
.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA,
.state = BNX2_TPAT_CPU_STATE,
.state_value_clear = 0xffffff,
.gpr0 = BNX2_TPAT_CPU_REG_FILE,
.evmask = BNX2_TPAT_CPU_EVENT_MASK,
.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER,
.inst = BNX2_TPAT_CPU_INSTRUCTION,
.bp = BNX2_TPAT_CPU_HW_BREAKPOINT,
.spad_base = BNX2_TPAT_SCRATCH,
.mips_view_base = 0x8000000,
};
static u8 bnx2_TXP_b06FwText[] = {
0xad, 0x7b, 0x7f, 0x70, 0x9b, 0x75, 0x7a, 0xe7, 0xe7, 0xd5, 0x0f, 0x5b,
0xb2, 0x65, 0x59, 0x0e, 0x4a, 0x90, 0x77, 0xbd, 0x8d, 0x5e, 0xf4, 0xca,
......@@ -4531,3 +4596,18 @@ static struct fw_info bnx2_txp_fw_06 = {
.rodata = bnx2_TXP_b06FwRodata,
};
/* Initialized Values for the TX Processor. */
static const struct cpu_reg cpu_reg_txp = {
.mode = BNX2_TXP_CPU_MODE,
.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT,
.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA,
.state = BNX2_TXP_CPU_STATE,
.state_value_clear = 0xffffff,
.gpr0 = BNX2_TXP_CPU_REG_FILE,
.evmask = BNX2_TXP_CPU_EVENT_MASK,
.pc = BNX2_TXP_CPU_PROGRAM_COUNTER,
.inst = BNX2_TXP_CPU_INSTRUCTION,
.bp = BNX2_TXP_CPU_HW_BREAKPOINT,
.spad_base = BNX2_TXP_SCRATCH,
.mips_view_base = 0x8000000,
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7