Merge tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The broken down time conversion is similar to what is done in the time
  subsystem since v5.14. The rest is fairly straightforward.

  Subsystem:
   - Switch to Neri and Schneider time conversion algorithm

  Drivers:
   - rx8025: add rx8035 support
   - s5m: modernize driver and set range"

* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: rx8010: select REGMAP_I2C
  dt-bindings: rtc: add Epson RX-8025 and RX-8035
  rtc: rx8025: implement RX-8035 support
  rtc: cmos: remove stale REVISIT comments
  rtc: tps65910: Correct driver module alias
  rtc: move RTC_LIB_KUNIT_TEST to proper location
  rtc: lib_test: add MODULE_LICENSE
  rtc: Improve performance of rtc_time64_to_tm(). Add tests.
  rtc: s5m: set range
  rtc: s5m: enable wakeup only when available
  rtc: s5m: signal the core when alarm are not available
  rtc: s5m: switch to devm_rtc_allocate_device

Documentation/devicetree/bindings/rtc/trivial-rtc.yaml

@@ -32,6 +32,9 @@ properties:
       - dallas,ds3232
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
       - epson,rx8010
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+      - epson,rx8025
+      - epson,rx8035
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
       - epson,rx8571
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE

drivers/rtc/Kconfig

@@ -75,6 +75,15 @@ config RTC_DEBUG
 	  Say yes here to enable debugging support in the RTC framework
 	  and individual RTC drivers.
 
+config RTC_LIB_KUNIT_TEST
+	tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this option to test RTC library functions.
+
+	  If unsure, say N.
+
 config RTC_NVMEM
 	bool "RTC non volatile storage support"
 	select NVMEM
@@ -624,6 +633,7 @@ config RTC_DRV_FM3130
 
 config RTC_DRV_RX8010
 	tristate "Epson RX8010SJ"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Epson RX8010SJ RTC
 	  chip.

drivers/rtc/Makefile

@@ -15,6 +15,8 @@ rtc-core-$(CONFIG_RTC_INTF_DEV)		+= dev.o
 rtc-core-$(CONFIG_RTC_INTF_PROC)	+= proc.o
 rtc-core-$(CONFIG_RTC_INTF_SYSFS)	+= sysfs.o
 
+obj-$(CONFIG_RTC_LIB_KUNIT_TEST)	+= lib_test.o
+
 # Keep the list ordered.
 
 obj-$(CONFIG_RTC_DRV_88PM80X)	+= rtc-88pm80x.o

drivers/rtc/lib.c

@@ -6,6 +6,8 @@
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
  * based on arch/arm/common/rtctime.c and other bits
+ *
+ * Author: Cassio Neri <cassio.neri@gmail.com> (rtc_time64_to_tm)
  */
 
 #include <linux/export.h>
@@ -22,8 +24,6 @@ static const unsigned short rtc_ydays[2][13] = {
 	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
 };
 
-#define LEAPS_THRU_END_OF(y) ((y) / 4 - (y) / 100 + (y) / 400)
-
 /*
  * The number of days in the month.
  */
@@ -42,42 +42,95 @@ int rtc_year_days(unsigned int day, unsigned int month, unsigned int year)
 }
 EXPORT_SYMBOL(rtc_year_days);
 
-/*
- * rtc_time64_to_tm - Converts time64_t to rtc_time.
- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
+/**
+ * rtc_time64_to_tm - converts time64_t to rtc_time.
+ *
+ * @time:	The number of seconds since 01-01-1970 00:00:00.
+ *		(Must be positive.)
+ * @tm:		Pointer to the struct rtc_time.
  */
 void rtc_time64_to_tm(time64_t time, struct rtc_time *tm)
 {
-	unsigned int month, year, secs;
+	unsigned int secs;
 	int days;
 
+	u64 u64tmp;
+	u32 u32tmp, udays, century, day_of_century, year_of_century, year,
+		day_of_year, month, day;
+	bool is_Jan_or_Feb, is_leap_year;
+
 	/* time must be positive */
 	days = div_s64_rem(time, 86400, &secs);
 
 	/* day of the week, 1970-01-01 was a Thursday */
 	tm->tm_wday = (days + 4) % 7;
 
-	year = 1970 + days / 365;
-	days -= (year - 1970) * 365
-		+ LEAPS_THRU_END_OF(year - 1)
-		- LEAPS_THRU_END_OF(1970 - 1);
-	while (days < 0) {
-		year -= 1;
-		days += 365 + is_leap_year(year);
-	}
-	tm->tm_year = year - 1900;
-	tm->tm_yday = days + 1;
-
-	for (month = 0; month < 11; month++) {
-		int newdays;
-
-		newdays = days - rtc_month_days(month, year);
-		if (newdays < 0)
-			break;
-		days = newdays;
-	}
-	tm->tm_mon = month;
-	tm->tm_mday = days + 1;
+	/*
+	 * The following algorithm is, basically, Proposition 6.3 of Neri
+	 * and Schneider [1]. In a few words: it works on the computational
+	 * (fictitious) calendar where the year starts in March, month = 2
+	 * (*), and finishes in February, month = 13. This calendar is
+	 * mathematically convenient because the day of the year does not
+	 * depend on whether the year is leap or not. For instance:
+	 *
+	 * March 1st		0-th day of the year;
+	 * ...
+	 * April 1st		31-st day of the year;
+	 * ...
+	 * January 1st		306-th day of the year; (Important!)
+	 * ...
+	 * February 28th	364-th day of the year;
+	 * February 29th	365-th day of the year (if it exists).
+	 *
+	 * After having worked out the date in the computational calendar
+	 * (using just arithmetics) it's easy to convert it to the
+	 * corresponding date in the Gregorian calendar.
+	 *
+	 * [1] "Euclidean Affine Functions and Applications to Calendar
+	 * Algorithms". https://arxiv.org/abs/2102.06959
+	 *
+	 * (*) The numbering of months follows rtc_time more closely and
+	 * thus, is slightly different from [1].
+	 */
+
+	udays		= ((u32) days) + 719468;
+
+	u32tmp		= 4 * udays + 3;
+	century		= u32tmp / 146097;
+	day_of_century	= u32tmp % 146097 / 4;
+
+	u32tmp		= 4 * day_of_century + 3;
+	u64tmp		= 2939745ULL * u32tmp;
+	year_of_century	= upper_32_bits(u64tmp);
+	day_of_year	= lower_32_bits(u64tmp) / 2939745 / 4;
+
+	year		= 100 * century + year_of_century;
+	is_leap_year	= year_of_century != 0 ?
+		year_of_century % 4 == 0 : century % 4 == 0;
+
+	u32tmp		= 2141 * day_of_year + 132377;
+	month		= u32tmp >> 16;
+	day		= ((u16) u32tmp) / 2141;
+
+	/*
+	 * Recall that January 01 is the 306-th day of the year in the
+	 * computational (not Gregorian) calendar.
+	 */
+	is_Jan_or_Feb	= day_of_year >= 306;
+
+	/* Converts to the Gregorian calendar. */
+	year		= year + is_Jan_or_Feb;
+	month		= is_Jan_or_Feb ? month - 12 : month;
+	day		= day + 1;
+
+	day_of_year	= is_Jan_or_Feb ?
+		day_of_year - 306 : day_of_year + 31 + 28 + is_leap_year;
+
+	/* Converts to rtc_time's format. */
+	tm->tm_year	= (int) (year - 1900);
+	tm->tm_mon	= (int) month;
+	tm->tm_mday	= (int) day;
+	tm->tm_yday	= (int) day_of_year + 1;
 
 	tm->tm_hour = secs / 3600;
 	secs -= tm->tm_hour * 3600;

drivers/rtc/lib_test.c

+// SPDX-License-Identifier: LGPL-2.1+
+
+#include <kunit/test.h>
+#include <linux/rtc.h>
+
+/*
+ * Advance a date by one day.
+ */
+static void advance_date(int *year, int *month, int *mday, int *yday)
+{
+	if (*mday != rtc_month_days(*month - 1, *year)) {
+		++*mday;
+		++*yday;
+		return;
+	}
+
+	*mday = 1;
+	if (*month != 12) {
+		++*month;
+		++*yday;
+		return;
+	}
+
+	*month = 1;
+	*yday  = 1;
+	++*year;
+}
+
+/*
+ * Checks every day in a 160000 years interval starting on 1970-01-01
+ * against the expected result.
+ */
+static void rtc_time64_to_tm_test_date_range(struct kunit *test)
+{
+	/*
+	 * 160000 years	= (160000 / 400) * 400 years
+	 *		= (160000 / 400) * 146097 days
+	 *		= (160000 / 400) * 146097 * 86400 seconds
+	 */
+	time64_t total_secs = ((time64_t) 160000) / 400 * 146097 * 86400;
+
+	int year	= 1970;
+	int month	= 1;
+	int mday	= 1;
+	int yday	= 1;
+
+	struct rtc_time result;
+	time64_t secs;
+	s64 days;
+
+	for (secs = 0; secs <= total_secs; secs += 86400) {
+
+		rtc_time64_to_tm(secs, &result);
+
+		days = div_s64(secs, 86400);
+
+		#define FAIL_MSG "%d/%02d/%02d (%2d) : %ld", \
+			year, month, mday, yday, days
+
+		KUNIT_ASSERT_EQ_MSG(test, year - 1900, result.tm_year, FAIL_MSG);
+		KUNIT_ASSERT_EQ_MSG(test, month - 1, result.tm_mon, FAIL_MSG);
+		KUNIT_ASSERT_EQ_MSG(test, mday, result.tm_mday, FAIL_MSG);
+		KUNIT_ASSERT_EQ_MSG(test, yday, result.tm_yday, FAIL_MSG);
+
+		advance_date(&year, &month, &mday, &yday);
+	}
+}
+
+static struct kunit_case rtc_lib_test_cases[] = {
+	KUNIT_CASE(rtc_time64_to_tm_test_date_range),
+	{}
+};
+
+static struct kunit_suite rtc_lib_test_suite = {
+	.name = "rtc_lib_test_cases",
+	.test_cases = rtc_lib_test_cases,
+};
+
+kunit_test_suite(rtc_lib_test_suite);
+
+MODULE_LICENSE("GPL");

drivers/rtc/rtc-cmos.c

@@ -229,19 +229,13 @@ static int cmos_read_time(struct device *dev, struct rtc_time *t)
 	if (!pm_trace_rtc_valid())
 		return -EIO;
 
-	/* REVISIT:  if the clock has a "century" register, use
-	 * that instead of the heuristic in mc146818_get_time().
-	 * That'll make Y3K compatility (year > 2070) easy!
-	 */
 	mc146818_get_time(t);
 	return 0;
 }
 
 static int cmos_set_time(struct device *dev, struct rtc_time *t)
 {
-	/* REVISIT:  set the "century" register if available
-	 *
-	 * NOTE: this ignores the issue whereby updating the seconds
+	/* NOTE: this ignores the issue whereby updating the seconds
 	 * takes effect exactly 500ms after we write the register.
 	 * (Also queueing and other delays before we get this far.)
 	 */

drivers/rtc/rtc-rx8025.c

@@ -60,14 +60,23 @@
 #define RX8025_ADJ_DATA_MAX	62
 #define RX8025_ADJ_DATA_MIN	-62
 
+enum rx_model {
+	model_rx_unknown,
+	model_rx_8025,
+	model_rx_8035,
+	model_last
+};
+
 static const struct i2c_device_id rx8025_id[] = {
-	{ "rx8025", 0 },
+	{ "rx8025", model_rx_8025 },
+	{ "rx8035", model_rx_8035 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rx8025_id);
 
 struct rx8025_data {
 	struct rtc_device *rtc;
+	enum rx_model model;
 	u8 ctrl1;
 };
 
@@ -100,10 +109,26 @@ static s32 rx8025_write_regs(const struct i2c_client *client,
 					      length, values);
 }
 
+static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
+{
+	int xstp = ctrl2 & RX8025_BIT_CTRL2_XST;
+	/* XSTP bit has different polarity on RX-8025 vs RX-8035.
+	 * RX-8025: 0 == oscillator stopped
+	 * RX-8035: 1 == oscillator stopped
+	 */
+
+	if (model == model_rx_8025)
+		xstp = !xstp;
+
+	return xstp;
+}
+
 static int rx8025_check_validity(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8025_data *drvdata = dev_get_drvdata(dev);
 	int ctrl2;
+	int xstp;
 
 	ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
 	if (ctrl2 < 0)
@@ -117,7 +142,8 @@ static int rx8025_check_validity(struct device *dev)
 		return -EINVAL;
 	}
 
-	if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) {
+	xstp = rx8025_is_osc_stopped(drvdata->model, ctrl2);
+	if (xstp) {
 		dev_warn(dev, "crystal stopped, date is invalid\n");
 		return -EINVAL;
 	}
@@ -127,6 +153,7 @@ static int rx8025_check_validity(struct device *dev)
 
 static int rx8025_reset_validity(struct i2c_client *client)
 {
+	struct rx8025_data *drvdata = i2c_get_clientdata(client);
 	int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
 
 	if (ctrl2 < 0)
@@ -134,22 +161,28 @@ static int rx8025_reset_validity(struct i2c_client *client)
 
 	ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET);
 
+	if (drvdata->model == model_rx_8025)
+		ctrl2 |= RX8025_BIT_CTRL2_XST;
+	else
+		ctrl2 &= ~(RX8025_BIT_CTRL2_XST);
+
 	return rx8025_write_reg(client, RX8025_REG_CTRL2,
-				ctrl2 | RX8025_BIT_CTRL2_XST);
+				ctrl2);
 }
 
 static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
 {
 	struct i2c_client *client = dev_id;
 	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
-	int status;
+	int status, xstp;
 
 	rtc_lock(rx8025->rtc);
 	status = rx8025_read_reg(client, RX8025_REG_CTRL2);
 	if (status < 0)
 		goto out;
 
-	if (!(status & RX8025_BIT_CTRL2_XST))
+	xstp = rx8025_is_osc_stopped(rx8025->model, status);
+	if (xstp)
 		dev_warn(&client->dev, "Oscillation stop was detected,"
 			 "you may have to readjust the clock\n");
 
@@ -519,6 +552,9 @@ static int rx8025_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, rx8025);
 
+	if (id)
+		rx8025->model = id->driver_data;
+
 	err = rx8025_init_client(client);
 	if (err)
 		return err;

drivers/rtc/rtc-s5m.c

@@ -204,15 +204,9 @@ static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data)
 	data[RTC_WEEKDAY] = 1 << tm->tm_wday;
 	data[RTC_DATE] = tm->tm_mday;
 	data[RTC_MONTH] = tm->tm_mon + 1;
-	data[RTC_YEAR1] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
+	data[RTC_YEAR1] = tm->tm_year - 100;
 
-	if (tm->tm_year < 100) {
-		pr_err("RTC cannot handle the year %d\n",
-		       1900 + tm->tm_year);
-		return -EINVAL;
-	} else {
-		return 0;
-	}
+	return 0;
 }
 
 /*
@@ -786,29 +780,35 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	device_init_wakeup(&pdev->dev, 1);
-
-	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
-						 &s5m_rtc_ops, THIS_MODULE);
-
+	info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(info->rtc_dev))
 		return PTR_ERR(info->rtc_dev);
 
-	if (!info->irq) {
-		dev_info(&pdev->dev, "Alarm IRQ not available\n");
-		return 0;
+	info->rtc_dev->ops = &s5m_rtc_ops;
+
+	if (info->device_type == S5M8763X) {
+		info->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_0000;
+		info->rtc_dev->range_max = RTC_TIMESTAMP_END_9999;
+	} else {
+		info->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+		info->rtc_dev->range_max = RTC_TIMESTAMP_END_2099;
 	}
 
-	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
-					s5m_rtc_alarm_irq, 0, "rtc-alarm0",
-					info);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
-			info->irq, ret);
-		return ret;
+	if (!info->irq) {
+		clear_bit(RTC_FEATURE_ALARM, info->rtc_dev->features);
+	} else {
+		ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+						s5m_rtc_alarm_irq, 0, "rtc-alarm0",
+						info);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+				info->irq, ret);
+			return ret;
+		}
+		device_init_wakeup(&pdev->dev, 1);
 	}
 
-	return 0;
+	return devm_rtc_register_device(info->rtc_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP

drivers/rtc/rtc-tps65910.c

@@ -467,6 +467,6 @@ static struct platform_driver tps65910_rtc_driver = {
 };
 
 module_platform_driver(tps65910_rtc_driver);
-MODULE_ALIAS("platform:rtc-tps65910");
+MODULE_ALIAS("platform:tps65910-rtc");
 MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
 MODULE_LICENSE("GPL");