Commit 107e15fc authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Greg Kroah-Hartman

serial: 8250_mid: use proper bar for DNV platform

Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible
resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce
an additional field in the internal structure and pass PCI BAR based on device
ID.
Reported-by: default avatar"Lai, Poey Seng" <poey.seng.lai@intel.com>
Fixes: 6ede6dcd ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Cc: stable@vger.kernel.org
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c2684ed7
......@@ -14,6 +14,7 @@
#include <linux/pci.h>
#include <linux/dma/hsu.h>
#include <linux/8250_pci.h>
#include "8250.h"
......@@ -31,6 +32,7 @@
struct mid8250;
struct mid8250_board {
unsigned int flags;
unsigned long freq;
unsigned int base_baud;
int (*setup)(struct mid8250 *, struct uart_port *p);
......@@ -106,12 +108,13 @@ static int dnv_setup(struct mid8250 *mid, struct uart_port *p)
{
struct hsu_dma_chip *chip = &mid->dma_chip;
struct pci_dev *pdev = to_pci_dev(p->dev);
unsigned int bar = FL_GET_BASE(mid->board->flags);
int ret;
chip->dev = &pdev->dev;
chip->irq = pdev->irq;
chip->regs = p->membase;
chip->length = pci_resource_len(pdev, 0);
chip->length = pci_resource_len(pdev, bar);
chip->offset = DNV_DMA_CHAN_OFFSET;
/* Falling back to PIO mode if DMA probing fails */
......@@ -217,6 +220,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct uart_8250_port uart;
struct mid8250 *mid;
unsigned int bar;
int ret;
ret = pcim_enable_device(pdev);
......@@ -230,6 +234,7 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENOMEM;
mid->board = (struct mid8250_board *)id->driver_data;
bar = FL_GET_BASE(mid->board->flags);
memset(&uart, 0, sizeof(struct uart_8250_port));
......@@ -242,8 +247,8 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.port.set_termios = mid8250_set_termios;
uart.port.mapbase = pci_resource_start(pdev, 0);
uart.port.membase = pcim_iomap(pdev, 0, 0);
uart.port.mapbase = pci_resource_start(pdev, bar);
uart.port.membase = pcim_iomap(pdev, bar, 0);
if (!uart.port.membase)
return -ENOMEM;
......@@ -282,18 +287,21 @@ static void mid8250_remove(struct pci_dev *pdev)
}
static const struct mid8250_board pnw_board = {
.flags = FL_BASE0,
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
};
static const struct mid8250_board tng_board = {
.flags = FL_BASE0,
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
};
static const struct mid8250_board dnv_board = {
.flags = FL_BASE1,
.freq = 133333333,
.base_baud = 115200,
.setup = dnv_setup,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment