Commit 10a398d0 authored by Roman Zippel's avatar Roman Zippel Committed by Thomas Gleixner

time: remove obsolete CLOCK_TICK_ADJUST

The first version of the ntp_interval/tick_length inconsistent usage patch was
recently merged as bbe4d18a

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405

While the fix did greatly improve the situation, it was correctly pointed out
by Roman that it does have a small bug: If the users change clocksources after
the system has been running and NTP has made corrections, the correctoins made
against the old clocksource will be applied against the new clocksource,
causing error.

The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH
definition has also made it up-stream as commit
e13a2e61

http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84

Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated
based on the PIT's frequency, and isn't really relevant to non-PIT
driven clocksources (that is, clocksources other then jiffies and pit).

This patch reverts both of those changes, and simply removes
CLOCK_TICK_ADJUST.

This does remove the granularity error correction for users of PIT and Jiffies
clocksource users, but the granularity error but for the majority of users, it
should be within the 500ppm range NTP can accommodate for.

For systems that have granularity errors greater then 500ppm, the
"ntp_tick_adj=" boot option can be used to compensate.

[johnstul@us.ibm.com: provided changelog]
[mattilinnanvuori@yahoo.com: maek ntp_tick_adj static]
Signed-off-by: default avatarRoman Zippel <zippel@linux-m68k.org>
Acked-by: default avatarjohn stultz <johnstul@us.ibm.com>
Signed-off-by: default avatarMatti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent a7901766
...@@ -232,14 +232,7 @@ static inline int ntp_synced(void) ...@@ -232,14 +232,7 @@ static inline int ntp_synced(void)
#else #else
#define NTP_INTERVAL_FREQ (HZ) #define NTP_INTERVAL_FREQ (HZ)
#endif #endif
#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
#define CLOCK_TICK_OVERFLOW (LATCH * HZ - CLOCK_TICK_RATE)
#define CLOCK_TICK_ADJUST (((s64)CLOCK_TICK_OVERFLOW * NSEC_PER_SEC) / \
(s64)CLOCK_TICK_RATE)
/* Because using NSEC_PER_SEC would be too easy */
#define NTP_INTERVAL_LENGTH ((((s64)TICK_USEC * NSEC_PER_USEC * USER_HZ) + \
CLOCK_TICK_ADJUST) / NTP_INTERVAL_FREQ)
/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */ /* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
extern u64 current_tick_length(void); extern u64 current_tick_length(void);
......
...@@ -42,12 +42,13 @@ long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */ ...@@ -42,12 +42,13 @@ long time_esterror = NTP_PHASE_LIMIT; /* estimated error (us) */
long time_freq; /* frequency offset (scaled ppm)*/ long time_freq; /* frequency offset (scaled ppm)*/
static long time_reftime; /* time at last adjustment (s) */ static long time_reftime; /* time at last adjustment (s) */
long time_adjust; long time_adjust;
static long ntp_tick_adj;
static void ntp_update_frequency(void) static void ntp_update_frequency(void)
{ {
u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ) u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
<< TICK_LENGTH_SHIFT; << TICK_LENGTH_SHIFT;
second_length += (s64)CLOCK_TICK_ADJUST << TICK_LENGTH_SHIFT; second_length += (s64)ntp_tick_adj << TICK_LENGTH_SHIFT;
second_length += (s64)time_freq << (TICK_LENGTH_SHIFT - SHIFT_NSEC); second_length += (s64)time_freq << (TICK_LENGTH_SHIFT - SHIFT_NSEC);
tick_length_base = second_length; tick_length_base = second_length;
...@@ -402,3 +403,11 @@ leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0) ...@@ -402,3 +403,11 @@ leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
notify_cmos_timer(); notify_cmos_timer();
return(result); return(result);
} }
static int __init ntp_tick_adj_setup(char *str)
{
ntp_tick_adj = simple_strtol(str, NULL, 0);
return 1;
}
__setup("ntp_tick_adj=", ntp_tick_adj_setup);
...@@ -187,8 +187,7 @@ static void change_clocksource(void) ...@@ -187,8 +187,7 @@ static void change_clocksource(void)
clock->error = 0; clock->error = 0;
clock->xtime_nsec = 0; clock->xtime_nsec = 0;
clocksource_calculate_interval(clock, clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
(unsigned long)(current_tick_length()>>TICK_LENGTH_SHIFT));
tick_clock_notify(); tick_clock_notify();
...@@ -245,8 +244,7 @@ void __init timekeeping_init(void) ...@@ -245,8 +244,7 @@ void __init timekeeping_init(void)
ntp_clear(); ntp_clear();
clock = clocksource_get_next(); clock = clocksource_get_next();
clocksource_calculate_interval(clock, clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
(unsigned long)(current_tick_length()>>TICK_LENGTH_SHIFT));
clock->cycle_last = clocksource_read(clock); clock->cycle_last = clocksource_read(clock);
xtime.tv_sec = sec; xtime.tv_sec = sec;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment