Commit 11013884 authored by Pierre-Louis Bossart's avatar Pierre-Louis Bossart Committed by Mark Brown

ASoC: Intel: atom: fix kernel-doc

Fix W=1 warnings. The kernel-doc format was probably never supported,
fix information as needed.
Signed-off-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200701183716.83314-2-pierre-louis.bossart@linux.intel.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent a2b782d5
......@@ -61,8 +61,13 @@ static int sst_fill_and_send_cmd_unlocked(struct sst_data *drv,
/**
* sst_fill_and_send_cmd - generate the IPC message and send it to the FW
* @ipc_msg: type of IPC (CMD, SET_PARAMS, GET_PARAMS)
* @cmd_data: the IPC payload
* @drv: sst_data
* @ipc_msg: type of IPC (CMD, SET_PARAMS, GET_PARAMS)
* @block: block index
* @task_id: task index
* @pipe_id: pipe index
* @cmd_data: the IPC payload
* @len: length of data to be sent
*/
static int sst_fill_and_send_cmd(struct sst_data *drv,
u8 ipc_msg, u8 block, u8 task_id, u8 pipe_id,
......@@ -78,7 +83,7 @@ static int sst_fill_and_send_cmd(struct sst_data *drv,
return ret;
}
/**
/*
* tx map value is a bitfield where each bit represents a FW channel
*
* 3 2 1 0 # 0 = codec0, 1 = codec1
......@@ -90,7 +95,7 @@ static u8 sst_ssp_tx_map[SST_MAX_TDM_SLOTS] = {
0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, /* default rx map */
};
/**
/*
* rx map value is a bitfield where each bit represents a slot
*
* 76543210 # 0 = slot 0, 1 = slot 1
......@@ -101,7 +106,7 @@ static u8 sst_ssp_rx_map[SST_MAX_TDM_SLOTS] = {
0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, /* default tx map */
};
/**
/*
* NOTE: this is invoked with lock held
*/
static int sst_send_slot_map(struct sst_data *drv)
......@@ -145,7 +150,8 @@ static int sst_slot_enum_info(struct snd_kcontrol *kcontrol,
/**
* sst_slot_get - get the status of the interleaver/deinterleaver control
*
* @kcontrol: control pointer
* @ucontrol: User data
* Searches the map where the control status is stored, and gets the
* channel/slot which is currently set for this enumerated control. Since it is
* an enumerated control, there is only one possible value.
......@@ -197,7 +203,8 @@ static int sst_check_and_send_slot_map(struct sst_data *drv, struct snd_kcontrol
/**
* sst_slot_put - set the status of interleaver/deinterleaver control
*
* @kcontrol: control pointer
* @ucontrol: User data
* (de)interleaver controls are defined in opposite sense to be user-friendly
*
* Instead of the enum value being the value written to the register, it is the
......@@ -280,7 +287,9 @@ static int sst_send_algo_cmd(struct sst_data *drv,
/**
* sst_find_and_send_pipe_algo - send all the algo parameters for a pipe
*
* @drv: sst_data
* @pipe: string identifier
* @ids: list of algorithms
* The algos which are in each pipeline are sent to the firmware one by one
*
* Called with lock held
......@@ -379,11 +388,15 @@ static int sst_gain_ctl_info(struct snd_kcontrol *kcontrol,
/**
* sst_send_gain_cmd - send the gain algorithm IPC to the FW
* @gv: the stored value of gain (also contains rampduration)
* @mute: flag that indicates whether this was called from the
* digital_mute callback or directly. If called from the
* digital_mute callback, module will be muted/unmuted based on this
* flag. The flag is always 0 if called directly.
* @drv: sst_data
* @gv:the stored value of gain (also contains rampduration)
* @task_id: task index
* @loc_id: location/position index
* @module_id: module index
* @mute: flag that indicates whether this was called from the
* digital_mute callback or directly. If called from the
* digital_mute callback, module will be muted/unmuted based on this
* flag. The flag is always 0 if called directly.
*
* Called with sst_data.lock held
*
......@@ -544,9 +557,12 @@ static const uint swm_mixer_input_ids[SST_SWM_INPUT_COUNT] = {
/**
* fill_swm_input - fill in the SWM input ids given the register
* @cmpnt: ASoC component
* @swm_input: array of swm_input_ids
* @reg: the register value is a bit-field inicated which mixer inputs are ON.
*
* The register value is a bit-field inicated which mixer inputs are ON. Use the
* lookup table to get the input-id and fill it in the structure.
* Use the lookup table to get the input-id and fill it in the
* structure.
*/
static int fill_swm_input(struct snd_soc_component *cmpnt,
struct swm_input_ids *swm_input, unsigned int reg)
......@@ -577,7 +593,7 @@ static int fill_swm_input(struct snd_soc_component *cmpnt,
}
/**
/*
* called with lock held
*/
static int sst_set_pipe_gain(struct sst_ids *ids,
......@@ -881,7 +897,7 @@ int sst_fill_ssp_config(struct snd_soc_dai *dai, unsigned int fmt)
return 0;
}
/**
/*
* sst_ssp_config - contains SSP configuration for media UC
* this can be overwritten by set_dai_xxx APIs
*/
......@@ -1300,6 +1316,9 @@ static bool is_sst_dapm_widget(struct snd_soc_dapm_widget *w)
/**
* sst_send_pipe_gains - send gains for the front-end DAIs
* @dai: front-end dai
* @stream: direction
* @mute: boolean indicating mute status
*
* The gains in the pipes connected to the front-ends are muted/unmuted
* automatically via the digital_mute() DAPM callback. This function sends the
......@@ -1357,7 +1376,9 @@ int sst_send_pipe_gains(struct snd_soc_dai *dai, int stream, int mute)
/**
* sst_fill_module_list - populate the list of modules/gains for a pipe
*
* @kctl: kcontrol pointer
* @w: dapm widget
* @type: widget type
*
* Fills the widget pointer in the kcontrol private data, and also fills the
* kcontrol pointer in the widget private data.
......@@ -1403,7 +1424,8 @@ static int sst_fill_module_list(struct snd_kcontrol *kctl,
/**
* sst_fill_widget_module_info - fill list of gains/algos for the pipe
* @widget: pipe modelled as a DAPM widget
* @w: pipe modeled as a DAPM widget
* @component: ASoC component
*
* Fill the list of gains/algos for the widget by looking at all the card
* controls and comparing the name of the widget with the first part of control
......@@ -1463,6 +1485,8 @@ static int sst_fill_widget_module_info(struct snd_soc_dapm_widget *w,
/**
* sst_fill_linked_widgets - fill the parent pointer for the linked widget
* @component: ASoC component
* @ids: sst_ids array
*/
static void sst_fill_linked_widgets(struct snd_soc_component *component,
struct sst_ids *ids)
......@@ -1480,6 +1504,7 @@ static void sst_fill_linked_widgets(struct snd_soc_component *component,
/**
* sst_map_modules_to_pipe - fill algo/gains list for all pipes
* @component: ASoC component
*/
static int sst_map_modules_to_pipe(struct snd_soc_component *component)
{
......
......@@ -49,6 +49,7 @@ void memcpy32_fromio(void *dst, const void __iomem *src, int count)
/**
* intel_sst_reset_dsp_mrfld - Resetting SST DSP
* @sst_drv_ctx: intel_sst_drv context pointer
*
* This resets DSP in case of MRFLD platfroms
*/
......@@ -77,6 +78,7 @@ int intel_sst_reset_dsp_mrfld(struct intel_sst_drv *sst_drv_ctx)
/**
* sst_start_merrifield - Start the SST DSP processor
* @sst_drv_ctx: intel_sst_drv context pointer
*
* This starts the DSP in MERRIFIELD platfroms
*/
......@@ -387,6 +389,8 @@ void sst_post_download_mrfld(struct intel_sst_drv *ctx)
/**
* sst_load_fw - function to load FW into DSP
* @sst_drv_ctx: intel_sst_drv context pointer
*
* Transfers the FW to DSP using dma/memcpy
*/
int sst_load_fw(struct intel_sst_drv *sst_drv_ctx)
......
......@@ -92,8 +92,8 @@ int sst_alloc_stream_mrfld(struct intel_sst_drv *sst_drv_ctx, void *params)
/**
* sst_realloc_stream - Send msg for (re-)allocating a stream using the
* @sst_drv_ctx intel_sst_drv context pointer
* @str_id: stream ID
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
*
* Send a msg for (re-)allocating a stream using the parameters previously
* passed to sst_alloc_stream_mrfld() for the same stream ID.
......@@ -142,12 +142,13 @@ int sst_realloc_stream(struct intel_sst_drv *sst_drv_ctx, int str_id)
}
/**
* sst_start_stream - Send msg for a starting stream
* @str_id: stream ID
*
* This function is called by any function which wants to start
* a stream.
*/
* sst_start_stream - Send msg for a starting stream
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
*
* This function is called by any function which wants to start
* a stream.
*/
int sst_start_stream(struct intel_sst_drv *sst_drv_ctx, int str_id)
{
int retval = 0;
......@@ -234,7 +235,8 @@ int sst_send_byte_stream_mrfld(struct intel_sst_drv *sst_drv_ctx,
/**
* sst_pause_stream - Send msg for a pausing stream
* @str_id: stream ID
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
*
* This function is called by any function which wants to pause
* an already running stream.
......@@ -278,7 +280,8 @@ int sst_pause_stream(struct intel_sst_drv *sst_drv_ctx, int str_id)
/**
* sst_resume_stream - Send msg for resuming stream
* @str_id: stream ID
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
*
* This function is called by any function which wants to resume
* an already paused stream.
......@@ -345,7 +348,8 @@ int sst_resume_stream(struct intel_sst_drv *sst_drv_ctx, int str_id)
/**
* sst_drop_stream - Send msg for stopping stream
* @str_id: stream ID
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
*
* This function is called by any function which wants to stop
* a stream.
......@@ -377,12 +381,14 @@ int sst_drop_stream(struct intel_sst_drv *sst_drv_ctx, int str_id)
}
/**
* sst_drain_stream - Send msg for draining stream
* @str_id: stream ID
*
* This function is called by any function which wants to drain
* a stream.
*/
* sst_drain_stream - Send msg for draining stream
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
* @partial_drain: boolean indicating if a gapless transition is taking place
*
* This function is called by any function which wants to drain
* a stream.
*/
int sst_drain_stream(struct intel_sst_drv *sst_drv_ctx,
int str_id, bool partial_drain)
{
......@@ -415,7 +421,8 @@ int sst_drain_stream(struct intel_sst_drv *sst_drv_ctx,
/**
* sst_free_stream - Frees a stream
* @str_id: stream ID
* @sst_drv_ctx: intel_sst_drv context pointer
* @str_id: stream ID
*
* This function is called by any function which wants to free
* a stream.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment