wifi: ath12k: add 6 GHz params in peer assoc command

Currently A-MPDU aggregation parameters are not being configured
during peer association for 6 GHz band. Hence, extract these
parameters from station's capabilities received in association
request and send to firmware. Without this, A-MPDU aggregation
is not happening in 6 GHz band.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Co-developed-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240508173655.22191-5-quic_pradeepc@quicinc.com

drivers/net/wireless/ath/ath12k/mac.c

@@ -2032,6 +2032,60 @@ static void ath12k_peer_assoc_h_he(struct ath12k *ar,
 	}
 }
 
+static void ath12k_peer_assoc_h_he_6ghz(struct ath12k *ar,
+					struct ieee80211_vif *vif,
+					struct ieee80211_sta *sta,
+					struct ath12k_wmi_peer_assoc_arg *arg)
+{
+	const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
+	struct cfg80211_chan_def def;
+	enum nl80211_band band;
+	u8 ampdu_factor, mpdu_density;
+
+	if (WARN_ON(ath12k_mac_vif_chan(vif, &def)))
+		return;
+
+	band = def.chan->band;
+
+	if (!arg->he_flag || band != NL80211_BAND_6GHZ || !sta->deflink.he_6ghz_capa.capa)
+		return;
+
+	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_40)
+		arg->bw_40 = true;
+
+	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_80)
+		arg->bw_80 = true;
+
+	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_160)
+		arg->bw_160 = true;
+
+	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_320)
+		arg->bw_320 = true;
+
+	arg->peer_he_caps_6ghz = le16_to_cpu(sta->deflink.he_6ghz_capa.capa);
+
+	mpdu_density = u32_get_bits(arg->peer_he_caps_6ghz,
+				    IEEE80211_HE_6GHZ_CAP_MIN_MPDU_START);
+	arg->peer_mpdu_density = ath12k_parse_mpdudensity(mpdu_density);
+
+	/* From IEEE Std 802.11ax-2021 - Section 10.12.2: An HE STA shall be capable of
+	 * receiving A-MPDU where the A-MPDU pre-EOF padding length is up to the value
+	 * indicated by the Maximum A-MPDU Length Exponent Extension field in the HE
+	 * Capabilities element and the Maximum A-MPDU Length Exponent field in HE 6 GHz
+	 * Band Capabilities element in the 6 GHz band.
+	 *
+	 * Here, we are extracting the Max A-MPDU Exponent Extension from HE caps and
+	 * factor is the Maximum A-MPDU Length Exponent from HE 6 GHZ Band capability.
+	 */
+	ampdu_factor = u8_get_bits(he_cap->he_cap_elem.mac_cap_info[3],
+				   IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK) +
+			u32_get_bits(arg->peer_he_caps_6ghz,
+				     IEEE80211_HE_6GHZ_CAP_MAX_AMPDU_LEN_EXP);
+
+	arg->peer_max_mpdu = (1u << (IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR +
+				     ampdu_factor)) - 1;
+}
+
 static void ath12k_peer_assoc_h_smps(struct ieee80211_sta *sta,
 				     struct ath12k_wmi_peer_assoc_arg *arg)
 {
@@ -2504,6 +2558,7 @@ static void ath12k_peer_assoc_prepare(struct ath12k *ar,
 	ath12k_peer_assoc_h_ht(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_vht(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_he(ar, vif, sta, arg);
+	ath12k_peer_assoc_h_he_6ghz(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_eht(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_qos(ar, vif, sta, arg);
 	ath12k_peer_assoc_h_phymode(ar, vif, sta, arg);
@@ -8701,7 +8756,7 @@ static int ath12k_mac_hw_register(struct ath12k_hw *ah)
 	ieee80211_hw_set(hw, SUPPORTS_TX_FRAG);
 	ieee80211_hw_set(hw, REPORTS_LOW_ACK);
 
-	if (ht_cap & WMI_HT_CAP_ENABLED) {
+	if ((ht_cap & WMI_HT_CAP_ENABLED) || ar->supports_6ghz) {
 		ieee80211_hw_set(hw, AMPDU_AGGREGATION);
 		ieee80211_hw_set(hw, TX_AMPDU_SETUP_IN_HW);
 		ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);