Commit 116c81f4 authored by Suzuki K Poulose's avatar Suzuki K Poulose Committed by Will Deacon

arm64: Work around systems with mismatched cache line sizes

Systems with differing CPU i-cache/d-cache line sizes can cause
problems with the cache management by software when the execution
is migrated from one to another. Usually, the application reads
the cache size on a CPU and then uses that length to perform cache
operations. However, if it gets migrated to another CPU with a smaller
cache line size, things could go completely wrong. To prevent such
cases, always use the smallest cache line size among the CPUs. The
kernel CPU feature infrastructure already keeps track of the safe
value for all CPUID registers including CTR. This patch works around
the problem by :

For kernel, dynamically patch the kernel to read the cache size
from the system wide copy of CTR_EL0.

For applications, trap read accesses to CTR_EL0 (by clearing the SCTLR.UCT)
and emulate the mrs instruction to return the system wide safe value
of CTR_EL0.

For faster access (i.e, avoiding to lookup the system wide value of CTR_EL0
via read_system_reg), we keep track of the pointer to table entry for
CTR_EL0 in the CPU feature infrastructure.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
parent 9dbd5bb2
......@@ -216,6 +216,20 @@ lr .req x30 // link register
.macro mmid, rd, rn
ldr \rd, [\rn, #MM_CONTEXT_ID]
.endm
/*
* read_ctr - read CTR_EL0. If the system has mismatched
* cache line sizes, provide the system wide safe value
* from arm64_ftr_reg_ctrel0.sys_val
*/
.macro read_ctr, reg
alternative_if_not ARM64_MISMATCHED_CACHE_LINE_SIZE
mrs \reg, ctr_el0 // read CTR
nop
alternative_else
ldr_l \reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL
alternative_endif
.endm
/*
* raw_dcache_line_size - get the minimum D-cache line size on this CPU
......@@ -232,7 +246,10 @@ lr .req x30 // link register
* dcache_line_size - get the safe D-cache line size across all CPUs
*/
.macro dcache_line_size, reg, tmp
raw_dcache_line_size \reg, \tmp
read_ctr \tmp
ubfm \tmp, \tmp, #16, #19 // cache line size encoding
mov \reg, #4 // bytes per word
lsl \reg, \reg, \tmp // actual cache line size
.endm
/*
......@@ -250,7 +267,10 @@ lr .req x30 // link register
* icache_line_size - get the safe I-cache line size across all CPUs
*/
.macro icache_line_size, reg, tmp
raw_icache_line_size \reg, \tmp
read_ctr \tmp
and \tmp, \tmp, #0xf // cache line size encoding
mov \reg, #4 // bytes per word
lsl \reg, \reg, \tmp // actual cache line size
.endm
/*
......
......@@ -39,8 +39,9 @@
#define ARM64_WORKAROUND_CAVIUM_27456 12
#define ARM64_HAS_32BIT_EL0 13
#define ARM64_HYP_OFFSET_LOW 14
#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15
#define ARM64_NCAPS 15
#define ARM64_NCAPS 16
#ifndef __ASSEMBLY__
......
......@@ -149,6 +149,9 @@
((op2) << ESR_ELx_SYS64_ISS_OP2_SHIFT) | \
((crn) << ESR_ELx_SYS64_ISS_CRN_SHIFT) | \
((crm) << ESR_ELx_SYS64_ISS_CRM_SHIFT))
#define ESR_ELx_SYS64_ISS_SYS_OP_MASK (ESR_ELx_SYS64_ISS_SYS_MASK | \
ESR_ELx_SYS64_ISS_DIR_MASK)
/*
* User space cache operations have the following sysreg encoding
* in System instructions.
......@@ -167,6 +170,11 @@
#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL \
(ESR_ELx_SYS64_ISS_SYS_VAL(1, 3, 1, 7, 0) | \
ESR_ELx_SYS64_ISS_DIR_WRITE)
#define ESR_ELx_SYS64_ISS_SYS_CTR ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 1, 0, 0)
#define ESR_ELx_SYS64_ISS_SYS_CTR_READ (ESR_ELx_SYS64_ISS_SYS_CTR | \
ESR_ELx_SYS64_ISS_DIR_READ)
#ifndef __ASSEMBLY__
#include <asm/types.h>
......
......@@ -100,6 +100,7 @@
/* SCTLR_EL1 specific flags. */
#define SCTLR_EL1_UCI (1 << 26)
#define SCTLR_EL1_SPAN (1 << 23)
#define SCTLR_EL1_UCT (1 << 15)
#define SCTLR_EL1_SED (1 << 8)
#define SCTLR_EL1_CP15BEN (1 << 5)
......
......@@ -23,6 +23,7 @@
#include <linux/dma-mapping.h>
#include <linux/kvm_host.h>
#include <linux/suspend.h>
#include <asm/cpufeature.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/smp_plat.h>
......@@ -145,5 +146,6 @@ int main(void)
DEFINE(HIBERN_PBE_ORIG, offsetof(struct pbe, orig_address));
DEFINE(HIBERN_PBE_ADDR, offsetof(struct pbe, address));
DEFINE(HIBERN_PBE_NEXT, offsetof(struct pbe, next));
DEFINE(ARM64_FTR_SYSVAL, offsetof(struct arm64_ftr_reg, sys_val));
return 0;
}
......@@ -30,6 +30,21 @@ is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
entry->midr_range_max);
}
static bool
has_mismatched_cache_line_size(const struct arm64_cpu_capabilities *entry,
int scope)
{
WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
return (read_cpuid_cachetype() & arm64_ftr_reg_ctrel0.strict_mask) !=
(arm64_ftr_reg_ctrel0.sys_val & arm64_ftr_reg_ctrel0.strict_mask);
}
static void cpu_enable_trap_ctr_access(void *__unused)
{
/* Clear SCTLR_EL1.UCT */
config_sctlr_el1(SCTLR_EL1_UCT, 0);
}
#define MIDR_RANGE(model, min, max) \
.def_scope = SCOPE_LOCAL_CPU, \
.matches = is_affected_midr_range, \
......@@ -107,6 +122,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
MIDR_RANGE(MIDR_THUNDERX_81XX, 0x00, 0x00),
},
#endif
{
.desc = "Mismatched cache line size",
.capability = ARM64_MISMATCHED_CACHE_LINE_SIZE,
.matches = has_mismatched_cache_line_size,
.def_scope = SCOPE_LOCAL_CPU,
.enable = cpu_enable_trap_ctr_access,
},
{
}
};
......
......@@ -480,6 +480,14 @@ static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs)
regs->pc += 4;
}
static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
{
int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;
regs->regs[rt] = arm64_ftr_reg_ctrel0.sys_val;
regs->pc += 4;
}
struct sys64_hook {
unsigned int esr_mask;
unsigned int esr_val;
......@@ -492,6 +500,12 @@ static struct sys64_hook sys64_hooks[] = {
.esr_val = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL,
.handler = user_cache_maint_handler,
},
{
/* Trap read access to CTR_EL0 */
.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
.esr_val = ESR_ELx_SYS64_ISS_SYS_CTR_READ,
.handler = ctr_read_handler,
},
{},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment