scsi: qla2xxx: Fix RIDA Format-2

This patch fixes offset for Format-2 data structure for Report ID
Acquisition. This caused driver to set remote_nport_id to 0x0000 in N2N
configuration. In a scenario where initiator's WWPN is higher than target's
WWPN, driver will assign 0x00 as target nport-id, which results into login
failure.

Link: https://lore.kernel.org/r/20191217220617.28084-12-hmadhani@marvell.comSigned-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/qla2xxx/qla_fw.h

@@ -1354,12 +1354,12 @@ struct vp_rpt_id_entry_24xx {
 	uint8_t port_id[3];
 	uint8_t format;
 	union {
-		struct {
+		struct _f0 {
 			/* format 0 loop */
 			uint8_t vp_idx_map[16];
 			uint8_t reserved_4[32];
 		} f0;
-		struct {
+		struct _f1 {
 			/* format 1 fabric */
 			uint8_t vpstat1_subcode; /* vp_status=1 subcode */
 			uint8_t flags;
@@ -1381,21 +1381,22 @@ struct vp_rpt_id_entry_24xx {
 			uint16_t bbcr;
 			uint8_t reserved_5[6];
 		} f1;
-		struct { /* format 2: N2N direct connect */
-		    uint8_t vpstat1_subcode;
-		    uint8_t flags;
-		    uint16_t rsv6;
-		    uint8_t rsv2[12];
-
-		    uint8_t ls_rjt_vendor;
-		    uint8_t ls_rjt_explanation;
-		    uint8_t ls_rjt_reason;
-		    uint8_t rsv3[5];
-
-		    uint8_t port_name[8];
-		    uint8_t node_name[8];
-		    uint8_t remote_nport_id[4];
-		    uint32_t reserved_5;
+		struct _f2 { /* format 2: N2N direct connect */
+			uint8_t vpstat1_subcode;
+			uint8_t flags;
+			uint16_t fip_flags;
+			uint8_t rsv2[12];
+
+			uint8_t ls_rjt_vendor;
+			uint8_t ls_rjt_explanation;
+			uint8_t ls_rjt_reason;
+			uint8_t rsv3[5];
+
+			uint8_t port_name[8];
+			uint8_t node_name[8];
+			uint16_t bbcr;
+			uint8_t reserved_5[2];
+			uint8_t remote_nport_id[4];
 		} f2;
 	} u;
 };