ASoC: sgtl5000: clean up sgtl5000_enable_regulators()
Function sgtl5000_enable_regulators() is somehow odd in handling the optional external VDDD supply. The driver can only enable this supply on SGTL5000 chip before revision 0x11, and of course when this external VDDD is present. It currently does something like below. 1. Check if regulator_bulk_get() on VDDA, VDDIO and VDDD will fail. If it fails, VDDD must be absent and it falls on internal LDO by calling sgtl5000_replace_vddd_with_ldo(). Otherwise, VDDD is used. And in either case, regulator_bulk_enable() will be called to enable 3 supplies. 2. In case that SGTL5000 revision is later than 0x11, even if external VDDD is present, it has to roll back the 'enable' and 'get' calls with regulator_bulk_disable() and regulator_bulk_free(), and starts over again by calling sgtl5000_replace_vddd_with_ldo() and regulator_bulk_enable(). Such back and forth calls sequence is complicated and unnecessary. Also, since commit 4ddfebd3 (regulator: core: Provide a dummy regulator with full constraints), regulator_bulk_get() will always succeeds because of the dummy regulator. Thus the VDDD detection is broken. The patch changes the flow to something like the following, which should be more reasonable and clear, and also fix the VDDD detection breakage. 1. Check if we're running a chip before revision 0x11, on which an external VDDD can possibly be an option. 2. If it is an early revision, call regulator_get_optional() to detect whether an external VDDD supply is available. 3. If external VDDD is present, call sgtl5000_replace_vddd_with_ldo() to update sgtl5000->supplies info. 4. Drop regulator_bulk_get() call in sgtl5000_replace_vddd_with_ldo(), and call it in sgtl5000_enable_regulators() no matter it's an external VDDD or internal LDO. 5. Call regulator_bulk_enable() to enable these 3 regulators. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
Showing
Please register or sign in to comment