Commit 11e6f4c3 authored by Nicolas Pitre's avatar Nicolas Pitre Committed by Daniel Lezcano

thermal/drivers/mediatek/lvts_thermal: Allow early empty sensor slots

Some systems don't always populate sensor controller slots starting
at slot 0. Use a bitmap instead of a count to indicate valid sensor
slots. Also create a pretty iterator for that.

About that iterator: it causes checkpatch to complain with "ERROR:
Macros with multiple statements should be enclosed in a do - while
loop". However this is not possible here. And many similar iterators
do exist using the same form in the tree already.
Signed-off-by: default avatarNicolas Pitre <npitre@baylibre.com>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-12-nico@fluxnic.net
parent 684cbb49
......@@ -107,10 +107,23 @@ struct lvts_ctrl_data {
struct lvts_sensor_data lvts_sensor[LVTS_SENSOR_MAX];
int cal_offset[LVTS_SENSOR_MAX];
int num_lvts_sensor;
u8 valid_sensor_mask;
int offset;
int mode;
};
#define VALID_SENSOR_MAP(s0, s1, s2, s3) \
.valid_sensor_mask = (((s0) ? BIT(0) : 0) | \
((s1) ? BIT(1) : 0) | \
((s2) ? BIT(2) : 0) | \
((s3) ? BIT(3) : 0))
#define lvts_for_each_valid_sensor(i, lvts_ctrl_data) \
for ((i) = 0; (i) < LVTS_SENSOR_MAX; (i)++) \
if (!((lvts_ctrl_data)->valid_sensor_mask & BIT(i))) \
continue; \
else
struct lvts_data {
const struct lvts_ctrl_data *lvts_ctrl;
int num_lvts_ctrl;
......@@ -134,7 +147,6 @@ struct lvts_ctrl {
const struct lvts_data *lvts_data;
u32 calibration[LVTS_SENSOR_MAX];
u32 hw_tshut_raw_temp;
int num_lvts_sensor;
int mode;
void __iomem *base;
int low_thresh;
......@@ -346,7 +358,7 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
if (high > lvts_ctrl->high_thresh)
return true;
for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++)
lvts_for_each_valid_sensor(i, lvts_ctrl->lvts_data->lvts_ctrl)
if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
&& lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
return false;
......@@ -550,6 +562,7 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
const struct lvts_ctrl_data *lvts_ctrl_data)
{
struct lvts_sensor *lvts_sensor = lvts_ctrl->sensors;
void __iomem *msr_regs[] = {
LVTS_MSR0(lvts_ctrl->base),
LVTS_MSR1(lvts_ctrl->base),
......@@ -566,7 +579,7 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
int i;
for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) {
lvts_for_each_valid_sensor(i, lvts_ctrl_data) {
int dt_id = lvts_ctrl_data->lvts_sensor[i].dt_id;
......@@ -606,8 +619,6 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
lvts_sensor[i].high_thresh = INT_MIN;
};
lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor;
return 0;
}
......@@ -678,7 +689,7 @@ static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl
{
int i;
for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) {
lvts_for_each_valid_sensor(i, lvts_ctrl_data) {
const struct lvts_sensor_data *sensor =
&lvts_ctrl_data->lvts_sensor[i];
......@@ -1103,7 +1114,7 @@ static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl)
u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ?
sensor_imm_bitmap : sensor_filt_bitmap;
for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) {
lvts_for_each_valid_sensor(i, lvts_ctrl->lvts_data->lvts_ctrl) {
int dt_id = lvts_sensors[i].dt_id;
......@@ -1326,7 +1337,7 @@ static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
{ .dt_id = MT7988_ETH2P5G_1,
.cal_offsets = { 0x0c, 0x0d, 0x0e } }
},
.num_lvts_sensor = 4,
VALID_SENSOR_MAP(1, 1, 1, 1),
.offset = 0x0,
},
{
......@@ -1340,7 +1351,7 @@ static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
{ .dt_id = MT7988_ETHWARP_1,
.cal_offsets = { 0x20, 0x21, 0x22 } }
},
.num_lvts_sensor = 4,
VALID_SENSOR_MAP(1, 1, 1, 1),
.offset = 0x100,
}
};
......@@ -1403,7 +1414,7 @@ static const struct lvts_ctrl_data mt8186_lvts_data_ctrl[] = {
{ .dt_id = MT8186_CAM,
.cal_offsets = { 12, 13, 14 } }
},
.num_lvts_sensor = 4,
VALID_SENSOR_MAP(1, 1, 1, 1),
.offset = 0x0,
},
{
......@@ -1413,7 +1424,7 @@ static const struct lvts_ctrl_data mt8186_lvts_data_ctrl[] = {
{ .dt_id = MT8186_BIG_CPU1,
.cal_offsets = { 27, 20, 21 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x100,
},
{
......@@ -1425,7 +1436,7 @@ static const struct lvts_ctrl_data mt8186_lvts_data_ctrl[] = {
{ .dt_id = MT8186_MFG,
.cal_offsets = { 39, 32, 33 } }
},
.num_lvts_sensor = 3,
VALID_SENSOR_MAP(1, 1, 1, 0),
.offset = 0x200,
}
};
......@@ -1438,7 +1449,7 @@ static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
{ .dt_id = MT8192_MCU_BIG_CPU1,
.cal_offsets = { 0x08, 0x09, 0x0a } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x0,
.mode = LVTS_MSR_FILTERED_MODE,
},
......@@ -1449,7 +1460,7 @@ static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
{ .dt_id = MT8192_MCU_BIG_CPU3,
.cal_offsets = { 0x10, 0x11, 0x12 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x100,
.mode = LVTS_MSR_FILTERED_MODE,
},
......@@ -1464,7 +1475,7 @@ static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = {
{ .dt_id = MT8192_MCU_LITTLE_CPU3,
.cal_offsets = { 0x20, 0x21, 0x22 } }
},
.num_lvts_sensor = 4,
VALID_SENSOR_MAP(1, 1, 1, 1),
.offset = 0x200,
.mode = LVTS_MSR_FILTERED_MODE,
}
......@@ -1478,7 +1489,7 @@ static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8192_AP_VPU1,
.cal_offsets = { 0x28, 0x29, 0x2a } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x0,
},
{
......@@ -1488,7 +1499,7 @@ static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8192_AP_GPU1,
.cal_offsets = { 0x30, 0x31, 0x32 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x100,
},
{
......@@ -1498,7 +1509,7 @@ static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8192_AP_CAM,
.cal_offsets = { 0x38, 0x39, 0x3a } },
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x200,
},
{
......@@ -1510,7 +1521,7 @@ static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8192_AP_MD2,
.cal_offsets = { 0x44, 0x45, 0x46 } }
},
.num_lvts_sensor = 3,
VALID_SENSOR_MAP(1, 1, 1, 0),
.offset = 0x300,
}
};
......@@ -1523,7 +1534,7 @@ static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{ .dt_id = MT8195_MCU_BIG_CPU1,
.cal_offsets = { 0x07, 0x08, 0x09 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x0,
},
{
......@@ -1533,7 +1544,7 @@ static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{ .dt_id = MT8195_MCU_BIG_CPU3,
.cal_offsets = { 0x10, 0x11, 0x12 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x100,
},
{
......@@ -1547,7 +1558,7 @@ static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
{ .dt_id = MT8195_MCU_LITTLE_CPU3,
.cal_offsets = { 0x1f, 0x20, 0x21 } }
},
.num_lvts_sensor = 4,
VALID_SENSOR_MAP(1, 1, 1, 1),
.offset = 0x200,
}
};
......@@ -1560,7 +1571,7 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8195_AP_VPU1,
.cal_offsets = { 0x28, 0x29, 0x2a } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x0,
},
{
......@@ -1570,7 +1581,7 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8195_AP_GPU1,
.cal_offsets = { 0x31, 0x32, 0x33 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x100,
},
{
......@@ -1582,7 +1593,7 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8195_AP_INFRA,
.cal_offsets = { 0x3d, 0x3e, 0x3f } }
},
.num_lvts_sensor = 3,
VALID_SENSOR_MAP(1, 1, 1, 0),
.offset = 0x200,
},
{
......@@ -1592,7 +1603,7 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
{ .dt_id = MT8195_AP_CAM1,
.cal_offsets = { 0x46, 0x47, 0x48 } }
},
.num_lvts_sensor = 2,
VALID_SENSOR_MAP(1, 1, 0, 0),
.offset = 0x300,
}
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment