Commit 1208ebf2 authored by Rod Whitby's avatar Rod Whitby Committed by Russell King

[ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver

These are the only three boards to use the IXP4XX-GPIO-LED driver, and
they can all use the new leds-gpio driver instead with no change in
functionality.

--
Signed-off-by: default avatarRod Whitby <rod@whitby.id.au>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 78225913
......@@ -1330,8 +1330,8 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_IXP4XX=y
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_IXP4XX is not set
CONFIG_LEDS_GPIO=y
#
# LED Triggers
......
......@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
......@@ -58,29 +59,28 @@ static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
},
};
#ifdef CONFIG_LEDS_CLASS
static struct resource dsmg600_led_resources[] = {
static struct gpio_led dsmg600_led_pins[] = {
{
.name = "power",
.start = DSMG600_LED_PWR_GPIO,
.end = DSMG600_LED_PWR_GPIO,
.flags = IXP4XX_GPIO_HIGH,
.name = "power",
.gpio = DSMG600_LED_PWR_GPIO,
},
{
.name = "wlan",
.start = DSMG600_LED_WLAN_GPIO,
.end = DSMG600_LED_WLAN_GPIO,
.flags = IXP4XX_GPIO_LOW,
.name = "wlan",
.gpio = DSMG600_LED_WLAN_GPIO,
.active_low = true,
},
};
static struct gpio_led_platform_data dsmg600_led_data = {
.num_leds = ARRAY_SIZE(dsmg600_led_pins),
.leds = dsmg600_led_pins,
};
static struct platform_device dsmg600_leds = {
.name = "IXP4XX-GPIO-LED",
.id = -1,
.num_resources = ARRAY_SIZE(dsmg600_led_resources),
.resource = dsmg600_led_resources,
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &dsmg600_led_data,
};
#endif
static struct resource dsmg600_uart_resources[] = {
{
......@@ -128,6 +128,7 @@ static struct platform_device dsmg600_uart = {
static struct platform_device *dsmg600_devices[] __initdata = {
&dsmg600_i2c_gpio,
&dsmg600_flash,
&dsmg600_leds,
};
static void dsmg600_power_off(void)
......@@ -175,11 +176,6 @@ static void __init dsmg600_init(void)
(void)platform_device_register(&dsmg600_uart);
platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
#ifdef CONFIG_LEDS_CLASS
/* We don't care whether or not this works. */
(void)platform_device_register(&dsmg600_leds);
#endif
}
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
......
......@@ -46,35 +46,34 @@ static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
},
};
#ifdef CONFIG_LEDS_IXP4XX
static struct resource nas100d_led_resources[] = {
static struct gpio_led nas100d_led_pins[] = {
{
.name = "wlan", /* green led */
.start = NAS100D_LED_WLAN_GPIO,
.end = NAS100D_LED_WLAN_GPIO,
.flags = IXP4XX_GPIO_LOW,
.gpio = NAS100D_LED_WLAN_GPIO,
.active_low = true,
},
{
.name = "power", /* blue power led (off=flashing) */
.start = NAS100D_LED_PWR_GPIO,
.end = NAS100D_LED_PWR_GPIO,
.flags = IXP4XX_GPIO_LOW,
.gpio = NAS100D_LED_PWR_GPIO,
.active_low = true,
},
{
.name = "disk", /* yellow led */
.start = NAS100D_LED_DISK_GPIO,
.end = NAS100D_LED_DISK_GPIO,
.flags = IXP4XX_GPIO_LOW,
.gpio = NAS100D_LED_DISK_GPIO,
.active_low = true,
},
};
static struct gpio_led_platform_data nas100d_led_data = {
.num_leds = ARRAY_SIZE(nas100d_led_pins),
.leds = nas100d_led_pins,
};
static struct platform_device nas100d_leds = {
.name = "IXP4XX-GPIO-LED",
.name = "leds-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(nas100d_led_resources),
.resource = nas100d_led_resources,
.dev.platform_data = &nas100d_led_data,
};
#endif
static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
.sda_pin = NAS100D_SDA_PIN,
......@@ -135,9 +134,7 @@ static struct platform_device nas100d_uart = {
static struct platform_device *nas100d_devices[] __initdata = {
&nas100d_i2c_gpio,
&nas100d_flash,
#ifdef CONFIG_LEDS_IXP4XX
&nas100d_leds,
#endif
};
static void nas100d_power_off(void)
......
......@@ -54,41 +54,37 @@ static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
},
};
#ifdef CONFIG_LEDS_IXP4XX
static struct resource nslu2_led_resources[] = {
static struct gpio_led nslu2_led_pins[] = {
{
.name = "ready", /* green led */
.start = NSLU2_LED_GRN_GPIO,
.end = NSLU2_LED_GRN_GPIO,
.flags = IXP4XX_GPIO_HIGH,
.gpio = NSLU2_LED_GRN_GPIO,
},
{
.name = "status", /* red led */
.start = NSLU2_LED_RED_GPIO,
.end = NSLU2_LED_RED_GPIO,
.flags = IXP4XX_GPIO_HIGH,
.gpio = NSLU2_LED_RED_GPIO,
},
{
.name = "disk-1",
.start = NSLU2_LED_DISK1_GPIO,
.end = NSLU2_LED_DISK1_GPIO,
.flags = IXP4XX_GPIO_LOW,
.gpio = NSLU2_LED_DISK1_GPIO,
.active_low = true,
},
{
.name = "disk-2",
.start = NSLU2_LED_DISK2_GPIO,
.end = NSLU2_LED_DISK2_GPIO,
.flags = IXP4XX_GPIO_LOW,
.gpio = NSLU2_LED_DISK2_GPIO,
.active_low = true,
},
};
static struct gpio_led_platform_data nslu2_led_data = {
.num_leds = ARRAY_SIZE(nslu2_led_pins),
.leds = nslu2_led_pins,
};
static struct platform_device nslu2_leds = {
.name = "IXP4XX-GPIO-LED",
.name = "leds-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(nslu2_led_resources),
.resource = nslu2_led_resources,
.dev.platform_data = &nslu2_led_data,
};
#endif
static struct platform_device nslu2_i2c_gpio = {
.name = "i2c-gpio",
......@@ -151,9 +147,7 @@ static struct platform_device *nslu2_devices[] __initdata = {
&nslu2_i2c_gpio,
&nslu2_flash,
&nslu2_beeper,
#ifdef CONFIG_LEDS_IXP4XX
&nslu2_leds,
#endif
};
static void nslu2_power_off(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment