Commit 121c6672 authored by Casper Andersson's avatar Casper Andersson Committed by David S. Miller

net: microchip: sparx5: correctly free skb in xmit

consume_skb on transmitted, kfree_skb on dropped, do not free on
TX_BUSY.

Previously the xmit function could return -EBUSY without freeing, which
supposedly is interpreted as a drop. And was using kfree on successfully
transmitted packets.

sparx5_fdma_xmit and sparx5_inject returns error code, where -EBUSY
indicates TX_BUSY and any other error code indicates dropped.

Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: default avatarCasper Andersson <casper.casan@gmail.com>
Reviewed-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fbf33f5a
...@@ -317,7 +317,7 @@ int sparx5_fdma_xmit(struct sparx5 *sparx5, u32 *ifh, struct sk_buff *skb) ...@@ -317,7 +317,7 @@ int sparx5_fdma_xmit(struct sparx5 *sparx5, u32 *ifh, struct sk_buff *skb)
next_dcb_hw = sparx5_fdma_next_dcb(tx, tx->curr_entry); next_dcb_hw = sparx5_fdma_next_dcb(tx, tx->curr_entry);
db_hw = &next_dcb_hw->db[0]; db_hw = &next_dcb_hw->db[0];
if (!(db_hw->status & FDMA_DCB_STATUS_DONE)) if (!(db_hw->status & FDMA_DCB_STATUS_DONE))
tx->dropped++; return -EINVAL;
db = list_first_entry(&tx->db_list, struct sparx5_db, list); db = list_first_entry(&tx->db_list, struct sparx5_db, list);
list_move_tail(&db->list, &tx->db_list); list_move_tail(&db->list, &tx->db_list);
next_dcb_hw->nextptr = FDMA_DCB_INVALID_DATA; next_dcb_hw->nextptr = FDMA_DCB_INVALID_DATA;
......
...@@ -234,9 +234,8 @@ netdev_tx_t sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev) ...@@ -234,9 +234,8 @@ netdev_tx_t sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev)
sparx5_set_port_ifh(ifh, port->portno); sparx5_set_port_ifh(ifh, port->portno);
if (sparx5->ptp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { if (sparx5->ptp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
ret = sparx5_ptp_txtstamp_request(port, skb); if (sparx5_ptp_txtstamp_request(port, skb) < 0)
if (ret) return NETDEV_TX_BUSY;
return ret;
sparx5_set_port_ifh_rew_op(ifh, SPARX5_SKB_CB(skb)->rew_op); sparx5_set_port_ifh_rew_op(ifh, SPARX5_SKB_CB(skb)->rew_op);
sparx5_set_port_ifh_pdu_type(ifh, SPARX5_SKB_CB(skb)->pdu_type); sparx5_set_port_ifh_pdu_type(ifh, SPARX5_SKB_CB(skb)->pdu_type);
...@@ -250,23 +249,31 @@ netdev_tx_t sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev) ...@@ -250,23 +249,31 @@ netdev_tx_t sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev)
else else
ret = sparx5_inject(sparx5, ifh, skb, dev); ret = sparx5_inject(sparx5, ifh, skb, dev);
if (ret == NETDEV_TX_OK) { if (ret == -EBUSY)
stats->tx_bytes += skb->len; goto busy;
stats->tx_packets++; if (ret < 0)
goto drop;
if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && stats->tx_bytes += skb->len;
SPARX5_SKB_CB(skb)->rew_op == IFH_REW_OP_TWO_STEP_PTP) stats->tx_packets++;
return ret; sparx5->tx.packets++;
dev_kfree_skb_any(skb); if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
} else { SPARX5_SKB_CB(skb)->rew_op == IFH_REW_OP_TWO_STEP_PTP)
stats->tx_dropped++; return NETDEV_TX_OK;
if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && dev_consume_skb_any(skb);
SPARX5_SKB_CB(skb)->rew_op == IFH_REW_OP_TWO_STEP_PTP) return NETDEV_TX_OK;
sparx5_ptp_txtstamp_release(port, skb); drop:
} stats->tx_dropped++;
return ret; sparx5->tx.dropped++;
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
busy:
if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
SPARX5_SKB_CB(skb)->rew_op == IFH_REW_OP_TWO_STEP_PTP)
sparx5_ptp_txtstamp_release(port, skb);
return NETDEV_TX_BUSY;
} }
static enum hrtimer_restart sparx5_injection_timeout(struct hrtimer *tmr) static enum hrtimer_restart sparx5_injection_timeout(struct hrtimer *tmr)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment