i2c: jz4780: Use devm_clk_get_enabled() helpers

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the calls to clk_disable_unprepare().

While at it, no more special handling needed here, remove the goto
label "err:".
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

drivers/i2c/busses/i2c-jz4780.c

@@ -792,26 +792,22 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return PTR_ERR(i2c->clk);
 
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret)
-		return ret;
-
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				   &clk_freq);
 	if (ret) {
 		dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
-		goto err;
+		return ret;
 	}
 
 	i2c->speed = clk_freq / 1000;
 	if (i2c->speed == 0) {
 		ret = -EINVAL;
 		dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
-		goto err;
+		return ret;
 	}
 	jz4780_i2c_set_speed(i2c);
 
@@ -827,29 +823,25 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err;
+		return ret;
 	i2c->irq = ret;
+
 	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
 			       dev_name(&pdev->dev), i2c);
 	if (ret)
-		goto err;
+		return ret;
 
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0)
-		goto err;
+		return ret;
 
 	return 0;
-
-err:
-	clk_disable_unprepare(i2c->clk);
-	return ret;
 }
 
 static void jz4780_i2c_remove(struct platform_device *pdev)
 {
 	struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(i2c->clk);
 	i2c_del_adapter(&i2c->adap);
 }