Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a new product ID for the xpad joystick driver

 - fixes to resistive-adc-touch and snvs_pwrkey drivers

 - a change to touchscreen helpers to make clang happier

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: touchscreen - avoid bitwise vs logical OR warning
  Input: xpad - add support for another USB ID of Nacon GC-100
  Input: resistive-adc-touch - fix division by zero error on z1 == 0
  Input: snvs_pwrkey - add clk handling

drivers/input/joystick/xpad.c

@@ -334,6 +334,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
@@ -451,6 +452,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke X-Box One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
 };
 

drivers/input/keyboard/snvs_pwrkey.c

@@ -3,6 +3,7 @@
 // Driver for the IMX SNVS ON/OFF Power Key
 // Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
 
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -99,6 +100,11 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void imx_snvs_pwrkey_disable_clk(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
 static void imx_snvs_pwrkey_act(void *pdata)
 {
 	struct pwrkey_drv_data *pd = pdata;
@@ -111,6 +117,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	struct pwrkey_drv_data *pdata;
 	struct input_dev *input;
 	struct device_node *np;
+	struct clk *clk;
 	int error;
 	u32 vid;
 
@@ -134,6 +141,28 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
 	}
 
+	clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
+
+	error = clk_prepare_enable(clk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to enable snvs clock (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&pdev->dev,
+					 imx_snvs_pwrkey_disable_clk, clk);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register clock cleanup handler (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
 	pdata->wakeup = of_property_read_bool(np, "wakeup-source");
 
 	pdata->irq = platform_get_irq(pdev, 0);

drivers/input/touchscreen.c

@@ -80,27 +80,27 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
 						input_abs_get_min(input, axis_x),
-						&minimum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-size-x",
-						input_abs_get_max(input,
-								  axis_x) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
-						input_abs_get_fuzz(input, axis_x),
-						&fuzz);
+						&minimum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-size-x",
+						 input_abs_get_max(input,
+								   axis_x) + 1,
+						 &maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
+						 input_abs_get_fuzz(input, axis_x),
+						 &fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis_x, minimum, maximum - 1, fuzz);
 
 	data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-y",
 						input_abs_get_min(input, axis_y),
-						&minimum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-size-y",
-						input_abs_get_max(input,
-								  axis_y) + 1,
-						&maximum) |
-		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
-						input_abs_get_fuzz(input, axis_y),
-						&fuzz);
+						&minimum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-size-y",
+						 input_abs_get_max(input,
+								   axis_y) + 1,
+						 &maximum);
+	data_present |= touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
+						 input_abs_get_fuzz(input, axis_y),
+						 &fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis_y, minimum, maximum - 1, fuzz);
 
@@ -108,11 +108,11 @@ void touchscreen_parse_properties(struct input_dev *input, bool multitouch,
 	data_present = touchscreen_get_prop_u32(dev,
 						"touchscreen-max-pressure",
 						input_abs_get_max(input, axis),
-						&maximum) |
-		       touchscreen_get_prop_u32(dev,
-						"touchscreen-fuzz-pressure",
-						input_abs_get_fuzz(input, axis),
-						&fuzz);
+						&maximum);
+	data_present |= touchscreen_get_prop_u32(dev,
+						 "touchscreen-fuzz-pressure",
+						 input_abs_get_fuzz(input, axis),
+						 &fuzz);
 	if (data_present)
 		touchscreen_set_params(input, axis, 0, maximum, fuzz);
 

drivers/input/touchscreen/resistive-adc-touch.c

@@ -71,19 +71,22 @@ static int grts_cb(const void *data, void *private)
 		unsigned int z2 = touch_info[st->ch_map[GRTS_CH_Z2]];
 		unsigned int Rt;
 
-		Rt = z2;
-		Rt -= z1;
-		Rt *= st->x_plate_ohms;
-		Rt = DIV_ROUND_CLOSEST(Rt, 16);
-		Rt *= x;
-		Rt /= z1;
-		Rt = DIV_ROUND_CLOSEST(Rt, 256);
-		/*
-		 * On increased pressure the resistance (Rt) is decreasing
-		 * so, convert values to make it looks as real pressure.
-		 */
-		if (Rt < GRTS_DEFAULT_PRESSURE_MAX)
-			press = GRTS_DEFAULT_PRESSURE_MAX - Rt;
+		if (likely(x && z1)) {
+			Rt = z2;
+			Rt -= z1;
+			Rt *= st->x_plate_ohms;
+			Rt = DIV_ROUND_CLOSEST(Rt, 16);
+			Rt *= x;
+			Rt /= z1;
+			Rt = DIV_ROUND_CLOSEST(Rt, 256);
+			/*
+			 * On increased pressure the resistance (Rt) is
+			 * decreasing so, convert values to make it looks as
+			 * real pressure.
+			 */
+			if (Rt < GRTS_DEFAULT_PRESSURE_MAX)
+				press = GRTS_DEFAULT_PRESSURE_MAX - Rt;
+		}
 	}
 
 	if ((!x && !y) || (st->pressure && (press < st->pressure_min))) {