Commit 1314bbf3 authored by Auke Kok's avatar Auke Kok Committed by Auke Kok

e1000: driver state fixes (race fix)

We were plagued by our interrupt handler posting a watchdog event which
could occur when our adapter was going down in case a late packet arrived
just before e1000_down() finished. This caused the watchdog timer to start
after the NIC was down and keep rescheduling it every N seconds. Once
the driver unloaded it would panic.
Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
parent 4f5f2317
......@@ -345,8 +345,9 @@ struct e1000_adapter {
};
enum e1000_state_t {
__E1000_DRIVER_TESTING,
__E1000_TESTING,
__E1000_RESETTING,
__E1000_DOWN
};
#endif /* _E1000_H_ */
......@@ -1624,7 +1624,7 @@ e1000_diag_test(struct net_device *netdev,
struct e1000_adapter *adapter = netdev_priv(netdev);
boolean_t if_running = netif_running(netdev);
set_bit(__E1000_DRIVER_TESTING, &adapter->flags);
set_bit(__E1000_TESTING, &adapter->flags);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
......@@ -1669,7 +1669,7 @@ e1000_diag_test(struct net_device *netdev,
adapter->hw.autoneg = autoneg;
e1000_reset(adapter);
clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
clear_bit(__E1000_TESTING, &adapter->flags);
if (if_running)
dev_open(netdev);
} else {
......@@ -1684,7 +1684,7 @@ e1000_diag_test(struct net_device *netdev,
data[2] = 0;
data[3] = 0;
clear_bit(__E1000_DRIVER_TESTING, &adapter->flags);
clear_bit(__E1000_TESTING, &adapter->flags);
}
msleep_interruptible(4 * 1000);
}
......
......@@ -476,13 +476,14 @@ e1000_up(struct e1000_adapter *adapter)
adapter->tx_queue_len = netdev->tx_queue_len;
mod_timer(&adapter->watchdog_timer, jiffies);
#ifdef CONFIG_E1000_NAPI
netif_poll_enable(netdev);
#endif
e1000_irq_enable(adapter);
clear_bit(__E1000_DOWN, &adapter->flags);
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
return 0;
}
......@@ -561,6 +562,10 @@ e1000_down(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
/* signal that we're down so the interrupt handler does not
* reschedule our watchdog timer */
set_bit(__E1000_DOWN, &adapter->flags);
e1000_irq_disable(adapter);
del_timer_sync(&adapter->tx_fifo_stall_timer);
......@@ -903,11 +908,6 @@ e1000_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->reset_task,
(void (*)(void *))e1000_reset_task, netdev);
/* we're going to reset, so assume we have no link for now */
netif_carrier_off(netdev);
netif_stop_queue(netdev);
e1000_check_options(adapter);
/* Initial Wake on LAN setting
......@@ -1014,6 +1014,10 @@ e1000_probe(struct pci_dev *pdev,
if ((err = register_netdev(netdev)))
goto err_register;
/* tell the stack to leave us alone until e1000_open() is called */
netif_carrier_off(netdev);
netif_stop_queue(netdev);
DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
cards_found++;
......@@ -1200,6 +1204,8 @@ e1000_sw_init(struct e1000_adapter *adapter)
atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->stats_lock);
set_bit(__E1000_DOWN, &adapter->flags);
return 0;
}
......@@ -1265,7 +1271,7 @@ e1000_open(struct net_device *netdev)
int err;
/* disallow open during test */
if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags))
if (test_bit(__E1000_TESTING, &adapter->flags))
return -EBUSY;
/* allocate transmit descriptors */
......@@ -3072,7 +3078,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if (unlikely(adapter->hw.mac_type == e1000_82547)) {
if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies);
mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
return NETDEV_TX_BUSY;
}
......@@ -3468,7 +3474,9 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
rctl = E1000_READ_REG(hw, RCTL);
E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
}
mod_timer(&adapter->watchdog_timer, jiffies);
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
#ifdef CONFIG_E1000_NAPI
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment