scsi: megaraid_sas: Add support for High IOPS queues

Aero controllers support balanced performance mode through the ability to
configure queues with different properties.

Reply queues with interrupt coalescing enabled are called "high iops reply
queues" and reply queues with interrupt coalescing disabled are called "low
latency reply queues".

The driver configures a combination of high iops and low latency reply
queues if:

 - HBA is an AERO controller;

 - MSI-X vectors supported by the HBA is 128;

 - Total CPU count in the system more than high iops queue count;

 - Driver is loaded with default max_msix_vectors module parameter; and

 - System booted in non-kdump mode.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/megaraid/megaraid_sas.h

@@ -1640,6 +1640,7 @@ enum FW_BOOT_CONTEXT {
 #define MR_ATOMIC_DESCRIPTOR_SUPPORT_OFFSET	(1 << 24)
 
 #define MR_CAN_HANDLE_64_BIT_DMA_OFFSET		(1 << 25)
+#define MR_INTR_COALESCING_SUPPORT_OFFSET	(1 << 26)
 
 #define MEGASAS_WATCHDOG_THREAD_INTERVAL	1000
 #define MEGASAS_WAIT_FOR_NEXT_DMA_MSECS		20
@@ -2250,6 +2251,9 @@ enum MR_PD_TYPE {
 #define MR_DEFAULT_NVME_MDTS_KB		128
 #define MR_NVME_PAGE_SIZE_MASK		0x000000FF
 
+/*Aero performance parameters*/
+#define MR_HIGH_IOPS_QUEUE_COUNT	8
+
 struct megasas_instance {
 
 	unsigned int *reply_map;
@@ -2433,6 +2437,8 @@ struct megasas_instance {
 	bool atomic_desc_support;
 	bool support_seqnum_jbod_fp;
 	bool support_pci_lane_margining;
+	u8  low_latency_index_start;
+	bool balanced_mode;
 };
 
 struct MR_LD_VF_MAP {

drivers/scsi/megaraid/megaraid_sas_base.c

@@ -5472,6 +5472,8 @@ megasas_setup_irqs_ioapic(struct megasas_instance *instance)
 				__func__, __LINE__);
 		return -1;
 	}
+	instance->balanced_mode = false;
+	instance->low_latency_index_start = 0;
 	return 0;
 }
 
@@ -5610,9 +5612,11 @@ megasas_setup_jbod_map(struct megasas_instance *instance)
 static void megasas_setup_reply_map(struct megasas_instance *instance)
 {
 	const struct cpumask *mask;
-	unsigned int queue, cpu;
+	unsigned int queue, cpu, low_latency_index_start;
 
-	for (queue = 0; queue < instance->msix_vectors; queue++) {
+	low_latency_index_start = instance->low_latency_index_start;
+
+	for (queue = low_latency_index_start; queue < instance->msix_vectors; queue++) {
 		mask = pci_irq_get_affinity(instance->pdev, queue);
 		if (!mask)
 			goto fallback;
@@ -5623,8 +5627,14 @@ static void megasas_setup_reply_map(struct megasas_instance *instance)
 	return;
 
 fallback:
-	for_each_possible_cpu(cpu)
-		instance->reply_map[cpu] = cpu % instance->msix_vectors;
+	queue = low_latency_index_start;
+	for_each_possible_cpu(cpu) {
+		instance->reply_map[cpu] = queue;
+		if (queue == (instance->msix_vectors - 1))
+			queue = low_latency_index_start;
+		else
+			queue++;
+	}
 }
 
 /**
@@ -5661,6 +5671,66 @@ int megasas_get_device_list(struct megasas_instance *instance)
 
 	return SUCCESS;
 }
+
+static int
+__megasas_alloc_irq_vectors(struct megasas_instance *instance)
+{
+	int i, irq_flags;
+	struct irq_affinity desc = { .pre_vectors = instance->low_latency_index_start };
+	struct irq_affinity *descp = &desc;
+
+	irq_flags = PCI_IRQ_MSIX;
+
+	if (instance->smp_affinity_enable)
+		irq_flags |= PCI_IRQ_AFFINITY;
+	else
+		descp = NULL;
+
+	i = pci_alloc_irq_vectors_affinity(instance->pdev,
+		instance->low_latency_index_start,
+		instance->msix_vectors, irq_flags, descp);
+
+	return i;
+}
+
+/**
+ * megasas_alloc_irq_vectors -	Allocate IRQ vectors/enable MSI-x vectors
+ * @instance:			Adapter soft state
+ * return:			void
+ */
+static void
+megasas_alloc_irq_vectors(struct megasas_instance *instance)
+{
+	int i;
+	unsigned int num_msix_req;
+
+	i = __megasas_alloc_irq_vectors(instance);
+
+	if (instance->balanced_mode && (i != instance->msix_vectors)) {
+		if (instance->msix_vectors)
+			pci_free_irq_vectors(instance->pdev);
+		/* Disable Balanced IOPS mode and try realloc vectors */
+		instance->balanced_mode = false;
+		instance->low_latency_index_start = 1;
+		num_msix_req = num_online_cpus() + instance->low_latency_index_start;
+
+		instance->msix_vectors = min(num_msix_req,
+				instance->msix_vectors);
+
+		i = __megasas_alloc_irq_vectors(instance);
+
+	}
+
+	dev_info(&instance->pdev->dev,
+		"requested/available msix %d/%d\n", instance->msix_vectors, i);
+
+	if (i > 0)
+		instance->msix_vectors = i;
+	else
+		instance->msix_vectors = 0;
+
+}
+
 /**
  * megasas_init_fw -	Initializes the FW
  * @instance:		Adapter soft state
@@ -5680,6 +5750,8 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	int i, j, loop;
 	struct IOV_111 *iovPtr;
 	struct fusion_context *fusion;
+	bool intr_coalescing;
+	unsigned int num_msix_req;
 
 	fusion = instance->ctrl_context;
 
@@ -5799,7 +5871,6 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	msix_enable = (instance->instancet->read_fw_status_reg(instance) &
 		       0x4000000) >> 0x1a;
 	if (msix_enable && !msix_disable) {
-		int irq_flags = PCI_IRQ_MSIX;
 
 		scratch_pad_1 = megasas_readl
 			(instance, &instance->reg_set->outbound_scratch_pad_1);
@@ -5865,19 +5936,49 @@ static int megasas_init_fw(struct megasas_instance *instance)
 		} else /* MFI adapters */
 			instance->msix_vectors = 1;
 
-		/* Don't bother allocating more MSI-X vectors than cpus */
-		instance->msix_vectors = min(instance->msix_vectors,
-					     (unsigned int)num_online_cpus());
-		if (instance->smp_affinity_enable)
-			irq_flags |= PCI_IRQ_AFFINITY;
-		i = pci_alloc_irq_vectors(instance->pdev, 1,
-					  instance->msix_vectors, irq_flags);
-		if (i > 0) {
-			instance->msix_vectors = i;
-		} else {
-			instance->msix_vectors = 0;
+
+		/*
+		 * For Aero (if some conditions are met), driver will configure a
+		 * few additional reply queues with interrupt coalescing enabled.
+		 * These queues with interrupt coalescing enabled are called
+		 * High IOPS queues and rest of reply queues (based on number of
+		 * logical CPUs) are termed as Low latency queues.
+		 *
+		 * Total Number of reply queues = High IOPS queues + low latency queues
+		 *
+		 * For rest of fusion adapters, 1 additional reply queue will be
+		 * reserved for management commands, rest of reply queues
+		 * (based on number of logical CPUs) will be used for IOs and
+		 * referenced as IO queues.
+		 * Total Number of reply queues = 1 + IO queues
+		 *
+		 * MFI adapters supports single MSI-x so single reply queue
+		 * will be used for IO and management commands.
+		 */
+
+		intr_coalescing = (scratch_pad_1 & MR_INTR_COALESCING_SUPPORT_OFFSET) ?
+								true : false;
+		if (intr_coalescing &&
+			(num_online_cpus() >= MR_HIGH_IOPS_QUEUE_COUNT) &&
+			(instance->msix_vectors == MEGASAS_MAX_MSIX_QUEUES))
+			instance->balanced_mode = true;
+		else
+			instance->balanced_mode = false;
+
+		if (instance->balanced_mode)
+			instance->low_latency_index_start =
+				MR_HIGH_IOPS_QUEUE_COUNT;
+		else
+			instance->low_latency_index_start = 1;
+
+		num_msix_req = num_online_cpus() + instance->low_latency_index_start;
+
+		instance->msix_vectors = min(num_msix_req,
+				instance->msix_vectors);
+
+		megasas_alloc_irq_vectors(instance);
+		if (!instance->msix_vectors)
 			instance->msix_load_balance = false;
-		}
 	}
 	/*
 	 * MSI-X host index 0 is common for all adapter.

drivers/scsi/megaraid/megaraid_sas_fusion.c

@@ -1058,6 +1058,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 	u32 scratch_pad_1;
 	ktime_t time;
 	bool cur_fw_64bit_dma_capable;
+	bool cur_intr_coalescing;
 
 	fusion = instance->ctrl_context;
 
@@ -1091,6 +1092,16 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 		goto fail_fw_init;
 	}
 
+	cur_intr_coalescing = (scratch_pad_1 & MR_INTR_COALESCING_SUPPORT_OFFSET) ?
+							true : false;
+
+	if ((instance->low_latency_index_start ==
+		MR_HIGH_IOPS_QUEUE_COUNT) && cur_intr_coalescing)
+		instance->balanced_mode = true;
+
+	dev_info(&instance->pdev->dev, "Balanced mode :%s\n",
+		instance->balanced_mode ? "Yes" : "No");
+
 	instance->fw_sync_cache_support = (scratch_pad_1 &
 		MR_CAN_HANDLE_SYNC_CACHE_OFFSET) ? 1 : 0;
 	dev_info(&instance->pdev->dev, "FW supports sync cache\t: %s\n",