drm/amd/display: Fix HUBP secondary viewport programming

[Why]
Secondary viewport dimension/position registers are not programmed,
which can cause issues in some stereo configurations.

[How]
Add register definitions and register programming.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c

@@ -841,6 +841,14 @@ void min_set_viewport(
 	REG_SET_2(DCSURF_PRI_VIEWPORT_START_C, 0,
 		  PRI_VIEWPORT_X_START_C, viewport_c->x,
 		  PRI_VIEWPORT_Y_START_C, viewport_c->y);
+
+	REG_SET_2(DCSURF_SEC_VIEWPORT_DIMENSION_C, 0,
+		  SEC_VIEWPORT_WIDTH_C, viewport_c->width,
+		  SEC_VIEWPORT_HEIGHT_C, viewport_c->height);
+
+	REG_SET_2(DCSURF_SEC_VIEWPORT_START_C, 0,
+		  SEC_VIEWPORT_X_START_C, viewport_c->x,
+		  SEC_VIEWPORT_Y_START_C, viewport_c->y);
 }
 
 void hubp1_read_state_common(struct hubp *hubp)

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.h

@@ -47,6 +47,8 @@
 	SRI(DCSURF_SEC_VIEWPORT_START, HUBP, id), \
 	SRI(DCSURF_PRI_VIEWPORT_DIMENSION_C, HUBP, id), \
 	SRI(DCSURF_PRI_VIEWPORT_START_C, HUBP, id), \
+	SRI(DCSURF_SEC_VIEWPORT_DIMENSION_C, HUBP, id), \
+	SRI(DCSURF_SEC_VIEWPORT_START_C, HUBP, id), \
 	SRI(DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH, HUBPREQ, id),\
 	SRI(DCSURF_PRIMARY_SURFACE_ADDRESS, HUBPREQ, id),\
 	SRI(DCSURF_SECONDARY_SURFACE_ADDRESS_HIGH, HUBPREQ, id),\
@@ -154,6 +156,8 @@
 	uint32_t DCSURF_SEC_VIEWPORT_START; \
 	uint32_t DCSURF_PRI_VIEWPORT_DIMENSION_C; \
 	uint32_t DCSURF_PRI_VIEWPORT_START_C; \
+	uint32_t DCSURF_SEC_VIEWPORT_DIMENSION_C; \
+	uint32_t DCSURF_SEC_VIEWPORT_START_C; \
 	uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH; \
 	uint32_t DCSURF_PRIMARY_SURFACE_ADDRESS; \
 	uint32_t DCSURF_SECONDARY_SURFACE_ADDRESS_HIGH; \
@@ -287,6 +291,10 @@
 	HUBP_SF(HUBP0_DCSURF_PRI_VIEWPORT_DIMENSION_C, PRI_VIEWPORT_HEIGHT_C, mask_sh),\
 	HUBP_SF(HUBP0_DCSURF_PRI_VIEWPORT_START_C, PRI_VIEWPORT_X_START_C, mask_sh),\
 	HUBP_SF(HUBP0_DCSURF_PRI_VIEWPORT_START_C, PRI_VIEWPORT_Y_START_C, mask_sh),\
+	HUBP_SF(HUBP0_DCSURF_SEC_VIEWPORT_DIMENSION_C, SEC_VIEWPORT_WIDTH_C, mask_sh),\
+	HUBP_SF(HUBP0_DCSURF_SEC_VIEWPORT_DIMENSION_C, SEC_VIEWPORT_HEIGHT_C, mask_sh),\
+	HUBP_SF(HUBP0_DCSURF_SEC_VIEWPORT_START_C, SEC_VIEWPORT_X_START_C, mask_sh),\
+	HUBP_SF(HUBP0_DCSURF_SEC_VIEWPORT_START_C, SEC_VIEWPORT_Y_START_C, mask_sh),\
 	HUBP_SF(HUBPREQ0_DCSURF_PRIMARY_SURFACE_ADDRESS_HIGH, PRIMARY_SURFACE_ADDRESS_HIGH, mask_sh),\
 	HUBP_SF(HUBPREQ0_DCSURF_PRIMARY_SURFACE_ADDRESS, PRIMARY_SURFACE_ADDRESS, mask_sh),\
 	HUBP_SF(HUBPREQ0_DCSURF_SECONDARY_SURFACE_ADDRESS_HIGH, SECONDARY_SURFACE_ADDRESS_HIGH, mask_sh),\
@@ -481,6 +489,10 @@
 	type PRI_VIEWPORT_HEIGHT_C; \
 	type PRI_VIEWPORT_X_START_C; \
 	type PRI_VIEWPORT_Y_START_C; \
+	type SEC_VIEWPORT_WIDTH_C; \
+	type SEC_VIEWPORT_HEIGHT_C; \
+	type SEC_VIEWPORT_X_START_C; \
+	type SEC_VIEWPORT_Y_START_C; \
 	type PRIMARY_SURFACE_ADDRESS_HIGH;\
 	type PRIMARY_SURFACE_ADDRESS;\
 	type SECONDARY_SURFACE_ADDRESS_HIGH;\