Commit 133d970e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
parents 050aaeab 38b87674
...@@ -127,6 +127,7 @@ Peter Oruba <peter@oruba.de> ...@@ -127,6 +127,7 @@ Peter Oruba <peter@oruba.de>
Peter Oruba <peter.oruba@amd.com> Peter Oruba <peter.oruba@amd.com>
Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com> Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
Praveen BP <praveenbp@ti.com> Praveen BP <praveenbp@ti.com>
Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
Rajesh Shah <rajesh.shah@intel.com> Rajesh Shah <rajesh.shah@intel.com>
Ralf Baechle <ralf@linux-mips.org> Ralf Baechle <ralf@linux-mips.org>
Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
......
Binding for ASCII LCD displays on Imagination Technologies boards
Required properties:
- compatible : should be one of:
"img,boston-lcd"
"mti,malta-lcd"
"mti,sead3-lcd"
Required properties for "img,boston-lcd":
- reg : memory region locating the device registers
Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
- regmap: phandle of the system controller containing the LCD registers
- offset: offset in bytes to the LCD registers within the system controller
The layout of the registers & properties of the display are determined
from the compatible string, making this binding somewhat trivial.
...@@ -2,9 +2,9 @@ ...@@ -2,9 +2,9 @@
Required properties: Required properties:
- compatible: "brcm,bcm3384", "brcm,bcm33843" - compatible: "brcm,bcm3368", "brcm,bcm3384", "brcm,bcm33843"
"brcm,bcm3384-viper", "brcm,bcm33843-viper" "brcm,bcm3384-viper", "brcm,bcm33843-viper"
"brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368", "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6362", "brcm,bcm6368",
"brcm,bcm63168", "brcm,bcm63268", "brcm,bcm63168", "brcm,bcm63268",
"brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360", "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
"brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425" "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
| m68k: | TODO | | m68k: | TODO |
| metag: | TODO | | metag: | TODO |
| microblaze: | TODO | | microblaze: | TODO |
| mips: | TODO | | mips: | ok |
| mn10300: | TODO | | mn10300: | TODO |
| nios2: | TODO | | nios2: | TODO |
| openrisc: | TODO | | openrisc: | TODO |
......
...@@ -6131,6 +6131,12 @@ M: Stanislaw Gruszka <stf_xl@wp.pl> ...@@ -6131,6 +6131,12 @@ M: Stanislaw Gruszka <stf_xl@wp.pl>
S: Maintained S: Maintained
F: drivers/usb/atm/ueagle-atm.c F: drivers/usb/atm/ueagle-atm.c
IMGTEC ASCII LCD DRIVER
M: Paul Burton <paul.burton@imgtec.com>
S: Maintained
F: Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
F: drivers/auxdisplay/img-ascii-lcd.c
INA209 HARDWARE MONITOR DRIVER INA209 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net> M: Guenter Roeck <linux@roeck-us.net>
L: linux-hwmon@vger.kernel.org L: linux-hwmon@vger.kernel.org
......
...@@ -11,6 +11,7 @@ platforms += cavium-octeon ...@@ -11,6 +11,7 @@ platforms += cavium-octeon
platforms += cobalt platforms += cobalt
platforms += dec platforms += dec
platforms += emma platforms += emma
platforms += generic
platforms += jazz platforms += jazz
platforms += jz4740 platforms += jz4740
platforms += lantiq platforms += lantiq
...@@ -18,7 +19,6 @@ platforms += lasat ...@@ -18,7 +19,6 @@ platforms += lasat
platforms += loongson32 platforms += loongson32
platforms += loongson64 platforms += loongson64
platforms += mti-malta platforms += mti-malta
platforms += mti-sead3
platforms += netlogic platforms += netlogic
platforms += paravirt platforms += paravirt
platforms += pic32 platforms += pic32
......
...@@ -65,6 +65,7 @@ config MIPS ...@@ -65,6 +65,7 @@ config MIPS
select HANDLE_DOMAIN_IRQ select HANDLE_DOMAIN_IRQ
select HAVE_EXIT_THREAD select HAVE_EXIT_THREAD
select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_ARCH_HARDENED_USERCOPY
menu "Machine selection" menu "Machine selection"
...@@ -72,6 +73,57 @@ choice ...@@ -72,6 +73,57 @@ choice
prompt "System type" prompt "System type"
default SGI_IP22 default SGI_IP22
config MIPS_GENERIC
bool "Generic board-agnostic MIPS kernel"
select BOOT_RAW
select BUILTIN_DTB
select CEVT_R4K
select CLKSRC_MIPS_GIC
select COMMON_CLK
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CSRC_R4K
select DMA_PERDEV_COHERENT
select HW_HAS_PCI
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_CPU_SCACHE
select MIPS_GIC
select MIPS_L1_CACHE_SHIFT_7
select NO_EXCEPT_FILL
select PCI_DRIVERS_GENERIC
select PINCTRL
select SMP_UP if SMP
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS32_R6
select SYS_HAS_CPU_MIPS64_R1
select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_MIPS64_R6
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_RELOCATABLE
select SYS_SUPPORTS_SMARTMIPS
select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
select USE_OF
help
Select this to build a kernel which aims to support multiple boards,
generally using a flattened device tree passed from the bootloader
using the boot protocol defined in the UHI (Unified Hosting
Interface) specification.
config MIPS_ALCHEMY config MIPS_ALCHEMY
bool "Alchemy processor based machines" bool "Alchemy processor based machines"
select ARCH_PHYS_ADDR_T_64BIT select ARCH_PHYS_ADDR_T_64BIT
...@@ -478,6 +530,7 @@ config MIPS_MALTA ...@@ -478,6 +530,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_ZBOOT select SYS_SUPPORTS_ZBOOT
select SYS_SUPPORTS_RELOCATABLE select SYS_SUPPORTS_RELOCATABLE
select USE_OF select USE_OF
select LIBFDT
select ZONE_DMA32 if 64BIT select ZONE_DMA32 if 64BIT
select BUILTIN_DTB select BUILTIN_DTB
select LIBFDT select LIBFDT
...@@ -493,42 +546,6 @@ config MACH_PIC32 ...@@ -493,42 +546,6 @@ config MACH_PIC32
Microchip PIC32 is a family of general-purpose 32 bit MIPS core Microchip PIC32 is a family of general-purpose 32 bit MIPS core
microcontrollers. microcontrollers.
config MIPS_SEAD3
bool "MIPS SEAD3 board"
select BOOT_ELF32
select BOOT_RAW
select BUILTIN_DTB
select CEVT_R4K
select CSRC_R4K
select CLKSRC_MIPS_GIC
select COMMON_CLK
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
select MIPS_GIC
select LIBFDT
select MIPS_MSC
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS32_R6
select SYS_HAS_CPU_MIPS64_R1
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_SMARTMIPS
select SYS_SUPPORTS_MICROMIPS
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_RELOCATABLE
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
select USE_OF
help
This enables support for the MIPS Technologies SEAD3 evaluation
board.
config NEC_MARKEINS config NEC_MARKEINS
bool "NEC EMMA2RH Mark-eins board" bool "NEC EMMA2RH Mark-eins board"
select SOC_EMMA2RH select SOC_EMMA2RH
...@@ -988,6 +1005,7 @@ source "arch/mips/ath79/Kconfig" ...@@ -988,6 +1005,7 @@ source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig" source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig" source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/bmips/Kconfig" source "arch/mips/bmips/Kconfig"
source "arch/mips/generic/Kconfig"
source "arch/mips/jazz/Kconfig" source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig" source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig" source "arch/mips/lantiq/Kconfig"
...@@ -1098,6 +1116,10 @@ config DMA_MAYBE_COHERENT ...@@ -1098,6 +1116,10 @@ config DMA_MAYBE_COHERENT
select DMA_NONCOHERENT select DMA_NONCOHERENT
bool bool
config DMA_PERDEV_COHERENT
bool
select DMA_MAYBE_COHERENT
config DMA_COHERENT config DMA_COHERENT
bool bool
...@@ -1401,6 +1423,16 @@ config CPU_LOONGSON1B ...@@ -1401,6 +1423,16 @@ config CPU_LOONGSON1B
The Loongson 1B is a 32-bit SoC, which implements the MIPS32 The Loongson 1B is a 32-bit SoC, which implements the MIPS32
release 2 instruction set. release 2 instruction set.
config CPU_LOONGSON1C
bool "Loongson 1C"
depends on SYS_HAS_CPU_LOONGSON1C
select CPU_LOONGSON1
select ARCH_WANT_OPTIONAL_GPIOLIB
select LEDS_GPIO_REGISTER
help
The Loongson 1C is a 32-bit SoC, which implements the MIPS32
release 2 instruction set.
config CPU_MIPS32_R1 config CPU_MIPS32_R1
bool "MIPS32 Release 1" bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1 depends on SYS_HAS_CPU_MIPS32_R1
...@@ -1850,6 +1882,9 @@ config SYS_HAS_CPU_LOONGSON2F ...@@ -1850,6 +1882,9 @@ config SYS_HAS_CPU_LOONGSON2F
config SYS_HAS_CPU_LOONGSON1B config SYS_HAS_CPU_LOONGSON1B
bool bool
config SYS_HAS_CPU_LOONGSON1C
bool
config SYS_HAS_CPU_MIPS32_R1 config SYS_HAS_CPU_MIPS32_R1
bool bool
...@@ -2906,7 +2941,7 @@ endchoice ...@@ -2906,7 +2941,7 @@ endchoice
choice choice
prompt "Kernel command line type" if !CMDLINE_OVERRIDE prompt "Kernel command line type" if !CMDLINE_OVERRIDE
default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \ default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
!MIPS_MALTA && !MIPS_SEAD3 && \ !MIPS_MALTA && \
!CAVIUM_OCTEON_SOC !CAVIUM_OCTEON_SOC
default MIPS_CMDLINE_FROM_BOOTLOADER default MIPS_CMDLINE_FROM_BOOTLOADER
...@@ -2960,7 +2995,6 @@ config PCI ...@@ -2960,7 +2995,6 @@ config PCI
bool "Support for PCI controller" bool "Support for PCI controller"
depends on HW_HAS_PCI depends on HW_HAS_PCI
select PCI_DOMAINS select PCI_DOMAINS
select NO_GENERIC_PCI_IOPORT_MAP
help help
Find out whether you have a PCI motherboard. PCI is the name of a Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside bus system, i.e. the way the CPU talks to the other stuff inside
...@@ -2981,6 +3015,17 @@ config HT_PCI ...@@ -2981,6 +3015,17 @@ config HT_PCI
config PCI_DOMAINS config PCI_DOMAINS
bool bool
config PCI_DOMAINS_GENERIC
bool
config PCI_DRIVERS_GENERIC
select PCI_DOMAINS_GENERIC if PCI_DOMAINS
bool
config PCI_DRIVERS_LEGACY
def_bool !PCI_DRIVERS_GENERIC
select NO_GENERIC_PCI_IOPORT_MAP
source "drivers/pci/Kconfig" source "drivers/pci/Kconfig"
# #
......
...@@ -262,7 +262,14 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) ...@@ -262,7 +262,14 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
VMLINUX_ENTRY_ADDRESS=$(entry-y) VMLINUX_ENTRY_ADDRESS=$(entry-y) \
PLATFORM=$(platform-y)
ifdef CONFIG_32BIT
bootvars-y += ADDR_BITS=32
endif
ifdef CONFIG_64BIT
bootvars-y += ADDR_BITS=64
endif
LDFLAGS += -m $(ld-emul) LDFLAGS += -m $(ld-emul)
...@@ -302,6 +309,11 @@ boot-y += uImage.gz ...@@ -302,6 +309,11 @@ boot-y += uImage.gz
boot-y += uImage.lzma boot-y += uImage.lzma
boot-y += uImage.lzo boot-y += uImage.lzo
endif endif
boot-y += vmlinux.itb
boot-y += vmlinux.gz.itb
boot-y += vmlinux.bz2.itb
boot-y += vmlinux.lzma.itb
boot-y += vmlinux.lzo.itb
# compressed boot image targets (arch/mips/boot/compressed/) # compressed boot image targets (arch/mips/boot/compressed/)
bootz-y := vmlinuz bootz-y := vmlinuz
...@@ -425,4 +437,67 @@ define archhelp ...@@ -425,4 +437,67 @@ define archhelp
echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo echo
echo ' These will be default as appropriate for a configured platform.' echo ' These will be default as appropriate for a configured platform.'
echo
echo ' If you are targeting a system supported by generic kernels you may'
echo ' configure the kernel for a given architecture target like so:'
echo
echo ' {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
echo
echo ' Otherwise, the following default configurations are available:'
endef endef
generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
generic_defconfigs :=
#
# If the user generates a generic kernel configuration without specifying a
# list of boards to include the config fragments for, default to including all
# available board config fragments.
#
ifeq ($(BOARDS),)
BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
endif
#
# Generic kernel configurations which merge generic_defconfig with the
# appropriate config fragments from arch/mips/configs/generic/, resulting in
# the ability to easily configure the kernel for a given architecture,
# endianness & set of boards without duplicating the needed configuration in
# hundreds of defconfig files.
#
define gen_generic_defconfigs
$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
target := $(bits)$(rev)$(filter el,$(endian))_defconfig
generic_defconfigs += $$(target)
$$(target): $(generic_config_dir)/$(bits)$(rev).config
$$(target): $(generic_config_dir)/$(endian).config
)))
endef
$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
.PHONY: $(generic_defconfigs)
$(generic_defconfigs):
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
$(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
$(Q)$(MAKE) olddefconfig
#
# Prevent generic merge_config rules attempting to merge single fragments
#
$(generic_config_dir)/%.config: ;
#
# Legacy defconfig compatibility - these targets used to be real defconfigs but
# now that the boards have been converted to use the generic kernel they are
# wrappers around the generic rules above.
#
.PHONY: sead3_defconfig
sead3_defconfig:
$(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
.PHONY: sead3micro_defconfig
sead3micro_defconfig:
$(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3
...@@ -48,17 +48,17 @@ void __init plat_mem_setup(void) ...@@ -48,17 +48,17 @@ void __init plat_mem_setup(void)
clear_c0_config(1 << 19); /* Clear Config[OD] */ clear_c0_config(1 << 19); /* Clear Config[OD] */
hw_coherentio = 0; hw_coherentio = 0;
coherentio = 1; coherentio = IO_COHERENCE_ENABLED;
switch (alchemy_get_cputype()) { switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000: case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500: case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100: case ALCHEMY_CPU_AU1100:
coherentio = 0; coherentio = IO_COHERENCE_DISABLED;
break; break;
case ALCHEMY_CPU_AU1200: case ALCHEMY_CPU_AU1200:
/* Au1200 AB USB does not support coherent memory */ /* Au1200 AB USB does not support coherent memory */
if (0 == (read_c0_prid() & PRID_REV_MASK)) if (0 == (read_c0_prid() & PRID_REV_MASK))
coherentio = 0; coherentio = IO_COHERENCE_DISABLED;
break; break;
} }
......
/* /*
* 8250 UART probe driver for the BCM47XX platforms
* Author: Aurelien Jarno
*
* This file is subject to the terms and conditions of the GNU General Public * This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive * License. See the file "COPYING" in the main directory of this archive
* for more details. * for more details.
...@@ -6,7 +9,6 @@ ...@@ -6,7 +9,6 @@
* Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net> * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
*/ */
#include <linux/module.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/serial.h> #include <linux/serial.h>
#include <linux/serial_8250.h> #include <linux/serial_8250.h>
...@@ -88,9 +90,4 @@ static int __init uart8250_init(void) ...@@ -88,9 +90,4 @@ static int __init uart8250_init(void)
} }
return -EINVAL; return -EINVAL;
} }
device_initcall(uart8250_init);
module_init(uart8250_init);
MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for the BCM47XX platforms");
...@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable); ...@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk) void clk_disable(struct clk *clk)
{ {
if (!clk)
return;
mutex_lock(&clocks_mutex); mutex_lock(&clocks_mutex);
clk_disable_unlocked(clk); clk_disable_unlocked(clk);
mutex_unlock(&clocks_mutex); mutex_unlock(&clocks_mutex);
......
...@@ -21,10 +21,6 @@ config DT_BCM93384WVG_VIPER ...@@ -21,10 +21,6 @@ config DT_BCM93384WVG_VIPER
bool "BCM93384WVG Viper CPU (EXPERIMENTAL)" bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
select BUILTIN_DTB select BUILTIN_DTB
config DT_BCM96358NB4SER
bool "BCM96358NB4SER"
select BUILTIN_DTB
config DT_BCM96368MVWG config DT_BCM96368MVWG
bool "BCM96368MVWG" bool "BCM96368MVWG"
select BUILTIN_DTB select BUILTIN_DTB
...@@ -65,6 +61,22 @@ config DT_BCM97435SVMB ...@@ -65,6 +61,22 @@ config DT_BCM97435SVMB
bool "BCM97435SVMB" bool "BCM97435SVMB"
select BUILTIN_DTB select BUILTIN_DTB
config DT_COMTREND_VR3032U
bool "Comtrend VR-3032u"
select BUILTIN_DTB
config DT_NETGEAR_CVG834G
bool "NETGEAR CVG834G"
select BUILTIN_DTB
config DT_SFR_NEUFBOX4_SERCOMM
bool "SFR Neufbox 4 (Sercomm)"
select BUILTIN_DTB
config DT_SFR_NEUFBOX6_SERCOMM
bool "SFR Neufbox 6 (Sercomm)"
select BUILTIN_DTB
endchoice endchoice
endif endif
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/of.h> #include <linux/of.h>
#include <linux/of_fdt.h> #include <linux/of_fdt.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/libfdt.h>
#include <linux/smp.h> #include <linux/smp.h>
#include <asm/addrspace.h> #include <asm/addrspace.h>
#include <asm/bmips.h> #include <asm/bmips.h>
...@@ -98,7 +99,7 @@ static void bcm6328_quirks(void) ...@@ -98,7 +99,7 @@ static void bcm6328_quirks(void)
static void bcm6358_quirks(void) static void bcm6358_quirks(void)
{ {
/* /*
* BCM6358 needs special handling for its shared TLB, so * BCM3368/BCM6358 need special handling for their shared TLB, so
* disable SMP for now * disable SMP for now
*/ */
bmips_smp_enabled = 0; bmips_smp_enabled = 0;
...@@ -110,10 +111,12 @@ static void bcm6368_quirks(void) ...@@ -110,10 +111,12 @@ static void bcm6368_quirks(void)
} }
static const struct bmips_quirk bmips_quirk_list[] = { static const struct bmips_quirk bmips_quirk_list[] = {
{ "brcm,bcm3368", &bcm6358_quirks },
{ "brcm,bcm3384-viper", &bcm3384_viper_quirks }, { "brcm,bcm3384-viper", &bcm3384_viper_quirks },
{ "brcm,bcm33843-viper", &bcm3384_viper_quirks }, { "brcm,bcm33843-viper", &bcm3384_viper_quirks },
{ "brcm,bcm6328", &bcm6328_quirks }, { "brcm,bcm6328", &bcm6328_quirks },
{ "brcm,bcm6358", &bcm6358_quirks }, { "brcm,bcm6358", &bcm6358_quirks },
{ "brcm,bcm6362", &bcm6368_quirks },
{ "brcm,bcm6368", &bcm6368_quirks }, { "brcm,bcm6368", &bcm6368_quirks },
{ "brcm,bcm63168", &bcm6368_quirks }, { "brcm,bcm63168", &bcm6368_quirks },
{ "brcm,bcm63268", &bcm6368_quirks }, { "brcm,bcm63268", &bcm6368_quirks },
...@@ -150,6 +153,8 @@ void __init plat_time_init(void) ...@@ -150,6 +153,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = freq; mips_hpt_frequency = freq;
} }
extern const char __appended_dtb;
void __init plat_mem_setup(void) void __init plat_mem_setup(void)
{ {
void *dtb; void *dtb;
...@@ -159,6 +164,11 @@ void __init plat_mem_setup(void) ...@@ -159,6 +164,11 @@ void __init plat_mem_setup(void)
ioport_resource.start = 0; ioport_resource.start = 0;
ioport_resource.end = ~0; ioport_resource.end = ~0;
#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
if (!fdt_check_header(&__appended_dtb))
dtb = (void *)&__appended_dtb;
else
#endif
/* intended to somewhat resemble ARM; see Documentation/arm/Booting */ /* intended to somewhat resemble ARM; see Documentation/arm/Booting */
if (fw_arg0 == 0 && fw_arg1 == 0xffffffff) if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
dtb = phys_to_virt(fw_arg2); dtb = phys_to_virt(fw_arg2);
......
...@@ -100,3 +100,69 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE ...@@ -100,3 +100,69 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
$(obj)/uImage: $(obj)/uImage.$(suffix-y) $(obj)/uImage: $(obj)/uImage.$(suffix-y)
@ln -sf $(notdir $<) $@ @ln -sf $(notdir $<) $@
@echo ' Image $@ is ready' @echo ' Image $@ is ready'
#
# Flattened Image Tree (.itb) images
#
targets += vmlinux.itb
targets += vmlinux.gz.itb
targets += vmlinux.bz2.itb
targets += vmlinux.lzma.itb
targets += vmlinux.lzo.itb
ifeq ($(ADDR_BITS),32)
itb_addr_cells = 1
endif
ifeq ($(ADDR_BITS),64)
itb_addr_cells = 2
endif
quiet_cmd_cpp_its_S = ITS $@
cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
-DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
-DVMLINUX_BINARY="\"$(3)\"" \
-DVMLINUX_COMPRESSION="\"$(2)\"" \
-DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
-DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
-DADDR_BITS=$(ADDR_BITS) \
-DADDR_CELLS=$(itb_addr_cells)
$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
quiet_cmd_itb-image = ITB $@
cmd_itb-image = \
env PATH="$(objtree)/scripts/dtc:$(PATH)" \
$(CONFIG_SHELL) $(MKIMAGE) \
-D "-I dts -O dtb -p 500 \
--include $(objtree)/arch/mips \
--warning no-unit_address_vs_reg" \
-f $(2) $@
$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
$(call if_changed,itb-image,$<)
$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,itb-image,$<)
$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
$(call if_changed,itb-image,$<)
$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
$(call if_changed,itb-image,$<)
$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
$(call if_changed,itb-image,$<)
dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb
dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb
dtb-$(CONFIG_DT_BCM96358NB4SER) += bcm96358nb4ser.dtb
dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb
dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb
dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb
...@@ -11,20 +10,29 @@ dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb ...@@ -11,20 +10,29 @@ dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb
dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb
dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb
dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb
dtb-$(CONFIG_DT_COMTREND_VR3032U) += bcm63268-comtrend-vr-3032u.dtb
dtb-$(CONFIG_DT_NETGEAR_CVG834G) += bcm3368-netgear-cvg834g.dtb
dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM) += bcm6358-neufbox4-sercomm.dtb
dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM) += bcm6362-neufbox6-sercomm.dtb
dtb-$(CONFIG_DT_NONE) += \ dtb-$(CONFIG_DT_NONE) += \
bcm93384wvg.dtb \ bcm3368-netgear-cvg834g.dtb \
bcm93384wvg_viper.dtb \ bcm6358-neufbox4-sercomm.dtb \
bcm96358nb4ser.dtb \ bcm6362-neufbox6-sercomm.dtb \
bcm96368mvwg.dtb \ bcm63268-comtrend-vr-3032u.dtb \
bcm9ejtagprb.dtb \ bcm93384wvg.dtb \
bcm97125cbmb.dtb \ bcm93384wvg_viper.dtb \
bcm97346dbsmb.dtb \ bcm96358nb4ser.dtb \
bcm97358svmb.dtb \ bcm96368mvwg.dtb \
bcm97360svmb.dtb \ bcm9ejtagprb.dtb \
bcm97362svmb.dtb \ bcm97125cbmb.dtb \
bcm97420c.dtb \ bcm97346dbsmb.dtb \
bcm97425svmb.dtb bcm97358svmb.dtb \
bcm97360svmb.dtb \
bcm97362svmb.dtb \
bcm97420c.dtb \
bcm97425svmb.dtb \
bcm97435svmb.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
......
/dts-v1/;
/include/ "bcm3368.dtsi"
/ {
compatible = "netgear,cvg834g", "brcm,bcm3368";
model = "NETGEAR CVG834G";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x02000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
};
&uart0 {
status = "okay";
};
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm3368";
cpus {
#address-cells = <1>;
#size-cells = <0>;
mips-hpt-frequency = <150000000>;
cpu@0 {
compatible = "brcm,bmips4350";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350";
device_type = "cpu";
reg = <1>;
};
};
clocks {
periph_clk: periph-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
ubus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
periph_cntl: syscon@fff8c000 {
compatible = "syscon";
reg = <0xfff8c000 0xc>;
native-endian;
};
reboot: syscon-reboot@fff8c008 {
compatible = "syscon-reboot";
regmap = <&periph_cntl>;
offset = <0x8>;
mask = <0x1>;
};
periph_intc: interrupt-controller@fff8c00c {
compatible = "brcm,bcm6345-l1-intc";
reg = <0xfff8c00c 0x8>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
};
uart0: serial@fff8c100 {
compatible = "brcm,bcm6345-uart";
reg = <0xfff8c100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <2>;
clocks = <&periph_clk>;
status = "disabled";
};
uart1: serial@fff8c120 {
compatible = "brcm,bcm6345-uart";
reg = <0xfff8c120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
clocks = <&periph_clk>;
status = "disabled";
};
};
};
/dts-v1/;
/include/ "bcm63268.dtsi"
/ {
compatible = "comtrend,vr-3032u", "brcm,bcm63268";
model = "Comtrend VR-3032u";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
};
&leds0 {
status = "ok";
brcm,serial-leds;
brcm,serial-dat-low;
brcm,serial-shift-inv;
led@0 {
reg = <0>;
brcm,hardware-controlled;
brcm,link-signal-sources = <0>;
/* GPHY0 Speed 0 */
};
led@1 {
reg = <1>;
brcm,hardware-controlled;
brcm,link-signal-sources = <1>;
/* GPHY0 Speed 1 */
};
led@2 {
reg = <2>;
active-low;
label = "vr-3032u:red:inet";
};
led@3 {
reg = <3>;
active-low;
label = "vr-3032u:green:dsl";
};
led@4 {
reg = <4>;
active-low;
label = "vr-3032u:green:usb";
};
led@7 {
reg = <7>;
active-low;
label = "vr-3032u:green:wps";
};
led@8 {
reg = <8>;
active-low;
label = "vr-3032u:green:inet";
};
led@9 {
reg = <9>;
brcm,hardware-controlled;
/* EPHY0 Activity */
};
led@10 {
reg = <10>;
brcm,hardware-controlled;
/* EPHY1 Activity */
};
led@11 {
reg = <11>;
brcm,hardware-controlled;
/* EPHY2 Activity */
};
led@12 {
reg = <12>;
brcm,hardware-controlled;
/* GPHY0 Activity */
};
led@13 {
reg = <13>;
brcm,hardware-controlled;
/* EPHY0 Speed */
};
led@14 {
reg = <14>;
brcm,hardware-controlled;
/* EPHY1 Speed */
};
led@15 {
reg = <15>;
brcm,hardware-controlled;
/* EPHY2 Speed */
};
led@20 {
reg = <20>;
active-low;
label = "vr-3032u:green:power";
default-state = "on";
};
};
&uart0 {
status = "okay";
};
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm63268";
cpus {
#address-cells = <1>;
#size-cells = <0>;
mips-hpt-frequency = <200000000>;
cpu@0 {
compatible = "brcm,bmips4350";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350";
device_type = "cpu";
reg = <1>;
};
};
clocks {
periph_clk: periph-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
ubus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
periph_cntl: syscon@10000000 {
compatible = "syscon";
reg = <0x10000000 0x14>;
native-endian;
};
reboot: syscon-reboot@10000008 {
compatible = "syscon-reboot";
regmap = <&periph_cntl>;
offset = <0x8>;
mask = <0x1>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x20>,
<0x10000040 0x20>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
uart0: serial@10000180 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000180 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <5>;
clocks = <&periph_clk>;
status = "disabled";
};
uart1: serial@100001a0 {
compatible = "brcm,bcm6345-uart";
reg = <0x100001a0 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <34>;
clocks = <&periph_clk>;
status = "disabled";
};
leds0: led-controller@10001900 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-leds";
reg = <0x10001900 0x24>;
status = "disabled";
};
ehci: usb@10002500 {
compatible = "brcm,bcm63268-ehci", "generic-ehci";
reg = <0x10002500 0x100>;
big-endian;
interrupt-parent = <&periph_intc>;
interrupts = <10>;
status = "disabled";
};
ohci: usb@10002600 {
compatible = "brcm,bcm63268-ohci", "generic-ohci";
reg = <0x10002600 0x100>;
big-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <9>;
status = "disabled";
};
};
};
...@@ -12,6 +12,7 @@ memory@0 { ...@@ -12,6 +12,7 @@ memory@0 {
}; };
chosen { chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0; stdout-path = &uart0;
}; };
}; };
......
/dts-v1/;
/include/ "bcm6362.dtsi"
/ {
compatible = "sfr,nb6-ser", "brcm,bcm6362";
model = "SFR NeufBox 6 (Sercomm)";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
};
};
&uart0 {
status = "okay";
};
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm6362";
cpus {
#address-cells = <1>;
#size-cells = <0>;
mips-hpt-frequency = <200000000>;
cpu@0 {
compatible = "brcm,bmips4350";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350";
device_type = "cpu";
reg = <1>;
};
};
clocks {
periph_clk: periph-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
};
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
ubus {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
periph_cntl: syscon@10000000 {
compatible = "syscon";
reg = <0x10000000 0x14>;
native-endian;
};
reboot: syscon-reboot@10000008 {
compatible = "syscon-reboot";
regmap = <&periph_cntl>;
offset = <0x8>;
mask = <0x1>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x10>,
<0x10000030 0x10>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
clocks = <&periph_clk>;
status = "disabled";
};
uart1: serial@10000120 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <4>;
clocks = <&periph_clk>;
status = "disabled";
};
leds0: led-controller@10001900 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6328-leds";
reg = <0x10001900 0x24>;
status = "disabled";
};
ehci: usb@10002500 {
compatible = "brcm,bcm6362-ehci", "generic-ehci";
reg = <0x10002500 0x100>;
big-endian;
interrupt-parent = <&periph_intc>;
interrupts = <10>;
status = "disabled";
};
ohci: usb@10002600 {
compatible = "brcm,bcm6362-ohci", "generic-ohci";
reg = <0x10002600 0x100>;
big-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <9>;
status = "disabled";
};
};
};
...@@ -26,7 +26,7 @@ aliases { ...@@ -26,7 +26,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -40,6 +40,12 @@ uart_clk: uart_clk { ...@@ -40,6 +40,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -49,7 +55,7 @@ rdb { ...@@ -49,7 +55,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@441400 { periph_intc: interrupt-controller@441400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x441400 0x30>, <0x441600 0x30>; reg = <0x441400 0x30>, <0x441600 0x30>;
...@@ -60,7 +66,7 @@ periph_intc: periph_intc@441400 { ...@@ -60,7 +66,7 @@ periph_intc: periph_intc@441400 {
interrupts = <2>, <3>; interrupts = <2>, <3>;
}; };
sun_l2_intc: sun_l2_intc@401800 { sun_l2_intc: interrupt-controller@401800 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x401800 0x30>; reg = <0x401800 0x30>;
interrupt-controller; interrupt-controller;
...@@ -81,7 +87,7 @@ gisb-arb@400000 { ...@@ -81,7 +87,7 @@ gisb-arb@400000 {
"avd_0", "jtag_0"; "avd_0", "jtag_0";
}; };
upg_irq0_intc: upg_irq0_intc@406780 { upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>; reg = <0x406780 0x8>;
...@@ -183,6 +189,26 @@ bscd: i2c@406380 { ...@@ -183,6 +189,26 @@ bscd: i2c@406380 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406580 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406580 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 18>;
};
ehci0: usb@488300 { ehci0: usb@488300 {
compatible = "brcm,bcm7125-ehci", "generic-ehci"; compatible = "brcm,bcm7125-ehci", "generic-ehci";
reg = <0x488300 0x100>; reg = <0x488300 0x100>;
......
...@@ -26,7 +26,7 @@ aliases { ...@@ -26,7 +26,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -40,6 +40,12 @@ uart_clk: uart_clk { ...@@ -40,6 +40,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -49,7 +55,7 @@ rdb { ...@@ -49,7 +55,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@411400 { periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>, <0x411600 0x30>; reg = <0x411400 0x30>, <0x411600 0x30>;
...@@ -60,7 +66,7 @@ periph_intc: periph_intc@411400 { ...@@ -60,7 +66,7 @@ periph_intc: periph_intc@411400 {
interrupts = <2>, <3>; interrupts = <2>, <3>;
}; };
sun_l2_intc: sun_l2_intc@403000 { sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x403000 0x30>; reg = <0x403000 0x30>;
interrupt-controller; interrupt-controller;
...@@ -81,7 +87,7 @@ gisb-arb@400000 { ...@@ -81,7 +87,7 @@ gisb-arb@400000 {
"jtag_0", "svd_0"; "jtag_0", "svd_0";
}; };
upg_irq0_intc: upg_irq0_intc@406780 { upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>; reg = <0x406780 0x8>;
...@@ -96,7 +102,7 @@ upg_irq0_intc: upg_irq0_intc@406780 { ...@@ -96,7 +102,7 @@ upg_irq0_intc: upg_irq0_intc@406780 {
interrupt-names = "upg_main", "upg_bsc"; interrupt-names = "upg_main", "upg_bsc";
}; };
upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>; reg = <0x408b80 0x8>;
...@@ -210,6 +216,59 @@ bsce: i2c@408980 { ...@@ -210,6 +216,59 @@ bsce: i2c@408980 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406580 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406580 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
pwmb: pwm@406800 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406800 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408440 {
compatible = "brcm,l2-intc";
reg = <0x408440 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <53>;
brcm,irq-can-wake;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x60>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 16>;
};
upg_gio_aon: gpio@408c00 {
compatible = "brcm,brcmstb-gpio";
reg = <0x408c00 0x60>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <27 32 2>;
};
enet0: ethernet@430000 { enet0: ethernet@430000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
...@@ -313,6 +372,26 @@ ohci3: usb@490600 { ...@@ -313,6 +372,26 @@ ohci3: usb@490600 {
status = "disabled"; status = "disabled";
}; };
hif_l2_intc: interrupt-controller@411000 {
compatible = "brcm,l2-intc";
reg = <0x411000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <30>;
};
nand: nand@412800 {
compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand";
reg = <0x412800 0x400>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>;
status = "disabled";
};
sata: sata@181000 { sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl"; reg-names = "ahci", "top-ctrl";
...@@ -352,5 +431,13 @@ sata_phy1: sata-phy@1 { ...@@ -352,5 +431,13 @@ sata_phy1: sata-phy@1 {
#phy-cells = <0>; #phy-cells = <0>;
}; };
}; };
sdhci0: sdhci@413500 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x413500 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <85>;
status = "disabled";
};
}; };
}; };
...@@ -20,7 +20,7 @@ aliases { ...@@ -20,7 +20,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -34,6 +34,12 @@ uart_clk: uart_clk { ...@@ -34,6 +34,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -43,7 +49,7 @@ rdb { ...@@ -43,7 +49,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@411400 { periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>; reg = <0x411400 0x30>;
...@@ -54,7 +60,7 @@ periph_intc: periph_intc@411400 { ...@@ -54,7 +60,7 @@ periph_intc: periph_intc@411400 {
interrupts = <2>; interrupts = <2>;
}; };
sun_l2_intc: sun_l2_intc@403000 { sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x403000 0x30>; reg = <0x403000 0x30>;
interrupt-controller; interrupt-controller;
...@@ -75,7 +81,7 @@ gisb-arb@400000 { ...@@ -75,7 +81,7 @@ gisb-arb@400000 {
"avd_0", "jtag_0"; "avd_0", "jtag_0";
}; };
upg_irq0_intc: upg_irq0_intc@406600 { upg_irq0_intc: interrupt-controller@406600 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>; reg = <0x406600 0x8>;
...@@ -90,7 +96,7 @@ upg_irq0_intc: upg_irq0_intc@406600 { ...@@ -90,7 +96,7 @@ upg_irq0_intc: upg_irq0_intc@406600 {
interrupt-names = "upg_main", "upg_bsc"; interrupt-names = "upg_main", "upg_bsc";
}; };
upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>; reg = <0x408b80 0x8>;
...@@ -194,6 +200,59 @@ bscd: i2c@408980 { ...@@ -194,6 +200,59 @@ bscd: i2c@408980 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406400 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406400 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
pwmb: pwm@406700 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406700 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408240 {
compatible = "brcm,l2-intc";
reg = <0x408240 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <50>;
brcm,irq-can-wake;
};
upg_gio: gpio@406500 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406500 0xa0>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 29 4>;
};
upg_gio_aon: gpio@408c00 {
compatible = "brcm,brcmstb-gpio";
reg = <0x408c00 0x60>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <21 32 2>;
};
enet0: ethernet@430000 { enet0: ethernet@430000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
...@@ -239,5 +298,25 @@ ohci0: usb@480400 { ...@@ -239,5 +298,25 @@ ohci0: usb@480400 {
interrupts = <66>; interrupts = <66>;
status = "disabled"; status = "disabled";
}; };
hif_l2_intc: interrupt-controller@411000 {
compatible = "brcm,l2-intc";
reg = <0x411000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <30>;
};
nand: nand@412800 {
compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand";
reg = <0x412800 0x400>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>;
status = "disabled";
};
}; };
}; };
...@@ -20,7 +20,7 @@ aliases { ...@@ -20,7 +20,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -34,6 +34,12 @@ uart_clk: uart_clk { ...@@ -34,6 +34,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -43,7 +49,7 @@ rdb { ...@@ -43,7 +49,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@411400 { periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>; reg = <0x411400 0x30>;
...@@ -54,7 +60,7 @@ periph_intc: periph_intc@411400 { ...@@ -54,7 +60,7 @@ periph_intc: periph_intc@411400 {
interrupts = <2>; interrupts = <2>;
}; };
sun_l2_intc: sun_l2_intc@403000 { sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x403000 0x30>; reg = <0x403000 0x30>;
interrupt-controller; interrupt-controller;
...@@ -75,7 +81,7 @@ gisb-arb@400000 { ...@@ -75,7 +81,7 @@ gisb-arb@400000 {
"avd_0", "jtag_0"; "avd_0", "jtag_0";
}; };
upg_irq0_intc: upg_irq0_intc@406600 { upg_irq0_intc: interrupt-controller@406600 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>; reg = <0x406600 0x8>;
...@@ -90,7 +96,7 @@ upg_irq0_intc: upg_irq0_intc@406600 { ...@@ -90,7 +96,7 @@ upg_irq0_intc: upg_irq0_intc@406600 {
interrupt-names = "upg_main", "upg_bsc"; interrupt-names = "upg_main", "upg_bsc";
}; };
upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>; reg = <0x408b80 0x8>;
...@@ -194,6 +200,51 @@ bscd: i2c@408980 { ...@@ -194,6 +200,51 @@ bscd: i2c@408980 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406400 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406400 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408440 {
compatible = "brcm,l2-intc";
reg = <0x408440 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <50>;
brcm,irq-can-wake;
};
upg_gio: gpio@406500 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406500 0xa0>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 29 4>;
};
upg_gio_aon: gpio@408c00 {
compatible = "brcm,brcmstb-gpio";
reg = <0x408c00 0x60>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <21 32 2>;
};
enet0: ethernet@430000 { enet0: ethernet@430000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
...@@ -240,6 +291,26 @@ ohci0: usb@480400 { ...@@ -240,6 +291,26 @@ ohci0: usb@480400 {
status = "disabled"; status = "disabled";
}; };
hif_l2_intc: interrupt-controller@411000 {
compatible = "brcm,l2-intc";
reg = <0x411000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <30>;
};
nand: nand@412800 {
compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand";
reg = <0x412800 0x400>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>;
status = "disabled";
};
sata: sata@181000 { sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl"; reg-names = "ahci", "top-ctrl";
...@@ -279,5 +350,13 @@ sata_phy1: sata-phy@1 { ...@@ -279,5 +350,13 @@ sata_phy1: sata-phy@1 {
#phy-cells = <0>; #phy-cells = <0>;
}; };
}; };
sdhci0: sdhci@410000 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x410000 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <82>;
status = "disabled";
};
}; };
}; };
...@@ -26,7 +26,7 @@ aliases { ...@@ -26,7 +26,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -40,6 +40,12 @@ uart_clk: uart_clk { ...@@ -40,6 +40,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -49,7 +55,7 @@ rdb { ...@@ -49,7 +55,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@411400 { periph_intc: interrupt-controller@411400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x411400 0x30>, <0x411600 0x30>; reg = <0x411400 0x30>, <0x411600 0x30>;
...@@ -60,7 +66,7 @@ periph_intc: periph_intc@411400 { ...@@ -60,7 +66,7 @@ periph_intc: periph_intc@411400 {
interrupts = <2>, <3>; interrupts = <2>, <3>;
}; };
sun_l2_intc: sun_l2_intc@403000 { sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x403000 0x30>; reg = <0x403000 0x30>;
interrupt-controller; interrupt-controller;
...@@ -81,7 +87,7 @@ gisb-arb@400000 { ...@@ -81,7 +87,7 @@ gisb-arb@400000 {
"avd_0", "jtag_0"; "avd_0", "jtag_0";
}; };
upg_irq0_intc: upg_irq0_intc@406600 { upg_irq0_intc: interrupt-controller@406600 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>; reg = <0x406600 0x8>;
...@@ -96,7 +102,7 @@ upg_irq0_intc: upg_irq0_intc@406600 { ...@@ -96,7 +102,7 @@ upg_irq0_intc: upg_irq0_intc@406600 {
interrupt-names = "upg_main", "upg_bsc"; interrupt-names = "upg_main", "upg_bsc";
}; };
upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { upg_aon_irq0_intc: interrupt-controller@408b80 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>; reg = <0x408b80 0x8>;
...@@ -190,6 +196,51 @@ bscd: i2c@408980 { ...@@ -190,6 +196,51 @@ bscd: i2c@408980 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406400 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406400 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408440 {
compatible = "brcm,l2-intc";
reg = <0x408440 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <50>;
brcm,irq-can-wake;
};
upg_gio: gpio@406500 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406500 0xa0>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 29 4>;
};
upg_gio_aon: gpio@408c00 {
compatible = "brcm,brcmstb-gpio";
reg = <0x408c00 0x60>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <21 32 2>;
};
enet0: ethernet@430000 { enet0: ethernet@430000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
...@@ -236,6 +287,26 @@ ohci0: usb@480400 { ...@@ -236,6 +287,26 @@ ohci0: usb@480400 {
status = "disabled"; status = "disabled";
}; };
hif_l2_intc: interrupt-controller@411000 {
compatible = "brcm,l2-intc";
reg = <0x411000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <30>;
};
nand: nand@412800 {
compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand";
reg = <0x412800 0x400>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>;
status = "disabled";
};
sata: sata@181000 { sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl"; reg-names = "ahci", "top-ctrl";
...@@ -275,5 +346,13 @@ sata_phy1: sata-phy@1 { ...@@ -275,5 +346,13 @@ sata_phy1: sata-phy@1 {
#phy-cells = <0>; #phy-cells = <0>;
}; };
}; };
sdhci0: sdhci@410000 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x410000 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <82>;
status = "disabled";
};
}; };
}; };
...@@ -26,7 +26,7 @@ aliases { ...@@ -26,7 +26,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -40,6 +40,12 @@ uart_clk: uart_clk { ...@@ -40,6 +40,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -49,7 +55,7 @@ rdb { ...@@ -49,7 +55,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@441400 { periph_intc: interrupt-controller@441400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x441400 0x30>, <0x441600 0x30>; reg = <0x441400 0x30>, <0x441600 0x30>;
...@@ -60,7 +66,7 @@ periph_intc: periph_intc@441400 { ...@@ -60,7 +66,7 @@ periph_intc: periph_intc@441400 {
interrupts = <2>, <3>; interrupts = <2>, <3>;
}; };
sun_l2_intc: sun_l2_intc@401800 { sun_l2_intc: interrupt-controller@401800 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x401800 0x30>; reg = <0x401800 0x30>;
interrupt-controller; interrupt-controller;
...@@ -82,7 +88,7 @@ gisb-arb@400000 { ...@@ -82,7 +88,7 @@ gisb-arb@400000 {
"jtag_0"; "jtag_0";
}; };
upg_irq0_intc: upg_irq0_intc@406780 { upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>; reg = <0x406780 0x8>;
...@@ -191,6 +197,34 @@ bsce: i2c@406800 { ...@@ -191,6 +197,34 @@ bsce: i2c@406800 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406580 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406580 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
pwmb: pwm@406880 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406880 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 27>;
};
enet0: ethernet@468000 { enet0: ethernet@468000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
......
...@@ -26,7 +26,7 @@ aliases { ...@@ -26,7 +26,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -40,6 +40,12 @@ uart_clk: uart_clk { ...@@ -40,6 +40,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -49,7 +55,7 @@ rdb { ...@@ -49,7 +55,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@41a400 { periph_intc: interrupt-controller@41a400 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x41a400 0x30>, <0x41a600 0x30>; reg = <0x41a400 0x30>, <0x41a600 0x30>;
...@@ -60,7 +66,7 @@ periph_intc: periph_intc@41a400 { ...@@ -60,7 +66,7 @@ periph_intc: periph_intc@41a400 {
interrupts = <2>, <3>; interrupts = <2>, <3>;
}; };
sun_l2_intc: sun_l2_intc@403000 { sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x403000 0x30>; reg = <0x403000 0x30>;
interrupt-controller; interrupt-controller;
...@@ -83,7 +89,7 @@ gisb-arb@400000 { ...@@ -83,7 +89,7 @@ gisb-arb@400000 {
"vice_0"; "vice_0";
}; };
upg_irq0_intc: upg_irq0_intc@406780 { upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>; reg = <0x406780 0x8>;
...@@ -98,7 +104,7 @@ upg_irq0_intc: upg_irq0_intc@406780 { ...@@ -98,7 +104,7 @@ upg_irq0_intc: upg_irq0_intc@406780 {
interrupt-names = "upg_main", "upg_bsc"; interrupt-names = "upg_main", "upg_bsc";
}; };
upg_aon_irq0_intc: upg_aon_irq0_intc@409480 { upg_aon_irq0_intc: interrupt-controller@409480 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x409480 0x8>; reg = <0x409480 0x8>;
...@@ -209,6 +215,59 @@ bsce: i2c@406300 { ...@@ -209,6 +215,59 @@ bsce: i2c@406300 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406580 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406580 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
pwmb: pwm@406800 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406800 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408440 {
compatible = "brcm,l2-intc";
reg = <0x408440 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <49>;
brcm,irq-can-wake;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 21>;
};
upg_gio_aon: gpio@4094c0 {
compatible = "brcm,brcmstb-gpio";
reg = <0x4094c0 0x40>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <18 4>;
};
enet0: ethernet@b80000 { enet0: ethernet@b80000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
...@@ -312,6 +371,26 @@ ohci3: usb@490600 { ...@@ -312,6 +371,26 @@ ohci3: usb@490600 {
status = "disabled"; status = "disabled";
}; };
hif_l2_intc: interrupt-controller@41a000 {
compatible = "brcm,l2-intc";
reg = <0x41a000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <24>;
};
nand: nand@41b800 {
compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand";
reg = <0x41b800 0x400>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>;
status = "disabled";
};
sata: sata@181000 { sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl"; reg-names = "ahci", "top-ctrl";
...@@ -351,5 +430,25 @@ sata_phy1: sata-phy@1 { ...@@ -351,5 +430,25 @@ sata_phy1: sata-phy@1 {
#phy-cells = <0>; #phy-cells = <0>;
}; };
}; };
sdhci0: sdhci@419000 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x419000 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <43>;
sd-uhs-sdr50;
mmc-hs200-1_8v;
status = "disabled";
};
sdhci1: sdhci@419200 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x419200 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <44>;
sd-uhs-sdr50;
mmc-hs200-1_8v;
status = "disabled";
};
}; };
}; };
...@@ -38,7 +38,7 @@ aliases { ...@@ -38,7 +38,7 @@ aliases {
uart0 = &uart0; uart0 = &uart0;
}; };
cpu_intc: cpu_intc { cpu_intc: interrupt-controller {
#address-cells = <0>; #address-cells = <0>;
compatible = "mti,cpu-interrupt-controller"; compatible = "mti,cpu-interrupt-controller";
...@@ -52,6 +52,12 @@ uart_clk: uart_clk { ...@@ -52,6 +52,12 @@ uart_clk: uart_clk {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <81000000>; clock-frequency = <81000000>;
}; };
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
}; };
rdb { rdb {
...@@ -61,7 +67,7 @@ rdb { ...@@ -61,7 +67,7 @@ rdb {
compatible = "simple-bus"; compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>; ranges = <0 0x10000000 0x01000000>;
periph_intc: periph_intc@41b500 { periph_intc: interrupt-controller@41b500 {
compatible = "brcm,bcm7038-l1-intc"; compatible = "brcm,bcm7038-l1-intc";
reg = <0x41b500 0x40>, <0x41b600 0x40>, reg = <0x41b500 0x40>, <0x41b600 0x40>,
<0x41b700 0x40>, <0x41b800 0x40>; <0x41b700 0x40>, <0x41b800 0x40>;
...@@ -73,7 +79,7 @@ periph_intc: periph_intc@41b500 { ...@@ -73,7 +79,7 @@ periph_intc: periph_intc@41b500 {
interrupts = <2>, <3>, <2>, <3>; interrupts = <2>, <3>, <2>, <3>;
}; };
sun_l2_intc: sun_l2_intc@403000 { sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc"; compatible = "brcm,l2-intc";
reg = <0x403000 0x30>; reg = <0x403000 0x30>;
interrupt-controller; interrupt-controller;
...@@ -98,7 +104,7 @@ gisb-arb@400000 { ...@@ -98,7 +104,7 @@ gisb-arb@400000 {
"scpu"; "scpu";
}; };
upg_irq0_intc: upg_irq0_intc@406780 { upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>; reg = <0x406780 0x8>;
...@@ -113,7 +119,7 @@ upg_irq0_intc: upg_irq0_intc@406780 { ...@@ -113,7 +119,7 @@ upg_irq0_intc: upg_irq0_intc@406780 {
interrupt-names = "upg_main", "upg_bsc"; interrupt-names = "upg_main", "upg_bsc";
}; };
upg_aon_irq0_intc: upg_aon_irq0_intc@409480 { upg_aon_irq0_intc: interrupt-controller@409480 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x409480 0x8>; reg = <0x409480 0x8>;
...@@ -224,6 +230,59 @@ bsce: i2c@409180 { ...@@ -224,6 +230,59 @@ bsce: i2c@409180 {
status = "disabled"; status = "disabled";
}; };
pwma: pwm@406580 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406580 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
pwmb: pwm@406800 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406800 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408440 {
compatible = "brcm,l2-intc";
reg = <0x408440 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <54>;
brcm,irq-can-wake;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 21>;
};
upg_gio_aon: gpio@4094c0 {
compatible = "brcm,brcmstb-gpio";
reg = <0x4094c0 0x40>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <18 4>;
};
enet0: ethernet@b80000 { enet0: ethernet@b80000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
...@@ -327,6 +386,26 @@ ohci3: usb@490600 { ...@@ -327,6 +386,26 @@ ohci3: usb@490600 {
status = "disabled"; status = "disabled";
}; };
hif_l2_intc: interrupt-controller@41b000 {
compatible = "brcm,l2-intc";
reg = <0x41b000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <24>;
};
nand: nand@41c800 {
compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand", "flash-dma";
reg = <0x41c800 0x600>, <0x41d000 0x100>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>, <4>;
status = "disabled";
};
sata: sata@181000 { sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl"; reg-names = "ahci", "top-ctrl";
...@@ -366,5 +445,25 @@ sata_phy1: sata-phy@1 { ...@@ -366,5 +445,25 @@ sata_phy1: sata-phy@1 {
#phy-cells = <0>; #phy-cells = <0>;
}; };
}; };
sdhci0: sdhci@41a000 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x41a000 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <47>;
sd-uhs-sdr50;
mmc-hs200-1_8v;
status = "disabled";
};
sdhci1: sdhci@41a200 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x41a200 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <48>;
sd-uhs-sdr50;
mmc-hs200-1_8v;
status = "disabled";
};
}; };
}; };
...@@ -45,6 +45,10 @@ &bscd { ...@@ -45,6 +45,10 @@ &bscd {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
/* FIXME: USB is wonky; disable it for now */ /* FIXME: USB is wonky; disable it for now */
&ehci0 { &ehci0 {
status = "disabled"; status = "disabled";
......
/dts-v1/; /dts-v1/;
/include/ "bcm7346.dtsi" /include/ "bcm7346.dtsi"
/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
/ { / {
compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346"; compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
...@@ -49,6 +50,14 @@ &bsce { ...@@ -49,6 +50,14 @@ &bsce {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&pwmb {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
...@@ -85,6 +94,10 @@ &ohci3 { ...@@ -85,6 +94,10 @@ &ohci3 {
status = "okay"; status = "okay";
}; };
&nand {
status = "okay";
};
&sata { &sata {
status = "okay"; status = "okay";
}; };
...@@ -92,3 +105,7 @@ &sata { ...@@ -92,3 +105,7 @@ &sata {
&sata_phy { &sata_phy {
status = "okay"; status = "okay";
}; };
&sdhci0 {
status = "okay";
};
/dts-v1/; /dts-v1/;
/include/ "bcm7358.dtsi" /include/ "bcm7358.dtsi"
/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
/ { / {
compatible = "brcm,bcm97358svmb", "brcm,bcm7358"; compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
...@@ -45,6 +46,14 @@ &bscd { ...@@ -45,6 +46,14 @@ &bscd {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&pwmb {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
...@@ -56,3 +65,7 @@ &ehci0 { ...@@ -56,3 +65,7 @@ &ehci0 {
&ohci0 { &ohci0 {
status = "okay"; status = "okay";
}; };
&nand {
status = "okay";
};
...@@ -45,6 +45,10 @@ &bscd { ...@@ -45,6 +45,10 @@ &bscd {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
...@@ -64,3 +68,7 @@ &sata { ...@@ -64,3 +68,7 @@ &sata {
&sata_phy { &sata_phy {
status = "okay"; status = "okay";
}; };
&sdhci0 {
status = "okay";
};
/dts-v1/; /dts-v1/;
/include/ "bcm7362.dtsi" /include/ "bcm7362.dtsi"
/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
/ { / {
compatible = "brcm,bcm97362svmb", "brcm,bcm7362"; compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
...@@ -41,6 +42,10 @@ &bscd { ...@@ -41,6 +42,10 @@ &bscd {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
...@@ -53,6 +58,10 @@ &ohci0 { ...@@ -53,6 +58,10 @@ &ohci0 {
status = "okay"; status = "okay";
}; };
&nand {
status = "okay";
};
&sata { &sata {
status = "okay"; status = "okay";
}; };
...@@ -60,3 +69,7 @@ &sata { ...@@ -60,3 +69,7 @@ &sata {
&sata_phy { &sata_phy {
status = "okay"; status = "okay";
}; };
&sdhci0 {
status = "okay";
};
...@@ -51,6 +51,14 @@ &bsce { ...@@ -51,6 +51,14 @@ &bsce {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&pwmb {
status = "okay";
};
/* FIXME: MAC driver comes up but cannot attach to PHY */ /* FIXME: MAC driver comes up but cannot attach to PHY */
&enet0 { &enet0 {
status = "disabled"; status = "disabled";
......
/dts-v1/; /dts-v1/;
/include/ "bcm7425.dtsi" /include/ "bcm7425.dtsi"
/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
/ { / {
compatible = "brcm,bcm97425svmb", "brcm,bcm7425"; compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
...@@ -51,6 +52,14 @@ &bsce { ...@@ -51,6 +52,14 @@ &bsce {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&pwmb {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
...@@ -86,3 +95,15 @@ &ehci3 { ...@@ -86,3 +95,15 @@ &ehci3 {
&ohci3 { &ohci3 {
status = "okay"; status = "okay";
}; };
&nand {
status = "okay";
};
&sdhci0 {
status = "okay";
};
&sdhci1 {
status = "okay";
};
/dts-v1/; /dts-v1/;
/include/ "bcm7435.dtsi" /include/ "bcm7435.dtsi"
/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
/ { / {
compatible = "brcm,bcm97435svmb", "brcm,bcm7435"; compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
...@@ -51,6 +52,14 @@ &bsce { ...@@ -51,6 +52,14 @@ &bsce {
status = "okay"; status = "okay";
}; };
&pwma {
status = "okay";
};
&pwmb {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
...@@ -87,6 +96,10 @@ &ohci3 { ...@@ -87,6 +96,10 @@ &ohci3 {
status = "okay"; status = "okay";
}; };
&nand {
status = "okay";
};
&sata { &sata {
status = "okay"; status = "okay";
}; };
...@@ -94,3 +107,11 @@ &sata { ...@@ -94,3 +107,11 @@ &sata {
&sata_phy { &sata_phy {
status = "okay"; status = "okay";
}; };
&sdhci0 {
status = "okay";
};
&sdhci1 {
status = "okay";
};
&nand {
nandcs@1 {
compatible = "brcm,nandcs";
reg = <1>;
nand-on-flash-bbt;
nand-ecc-strength = <24>;
nand-ecc-step-size = <1024>;
brcm,nand-oob-sector-size = <27>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1.rootfs@0 {
reg = <0x0 0x10000000>;
};
flash1.kernel@10000000 {
reg = <0x10000000 0x400000>;
};
};
};
};
&nand {
nandcs@1 {
compatible = "brcm,nandcs";
reg = <1>;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
brcm,nand-oob-sector-size = <16>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1.rootfs@0 {
reg = <0x0 0x10000000>;
};
flash1.kernel@10000000 {
reg = <0x10000000 0x400000>;
};
};
};
};
...@@ -8,55 +8,16 @@ ...@@ -8,55 +8,16 @@
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
/include/ "octeon_3xxx.dtsi" /include/ "dlink_dsr-500n-1000n.dtsi"
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
/ { / {
model = "dlink,dsr-1000n"; model = "dlink,dsr-1000n";
soc@0 { soc@0 {
smi0: mdio@1180000001800 {
phy8: ethernet-phy@8 {
reg = <8>;
compatible = "ethernet-phy-ieee802.3-c22";
};
};
pip: pip@11800a0000000 {
interface@0 {
ethernet@0 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
ethernet@1 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
ethernet@2 {
phy-handle = <&phy8>;
};
};
};
twsi0: i2c@1180000001000 {
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
};
};
uart0: serial@1180000000800 { uart0: serial@1180000000800 {
clock-frequency = <500000000>; clock-frequency = <500000000>;
}; };
usbn: usbn@1180068000000 {
refclk-frequency = <12000000>;
refclk-type = "crystal";
};
}; };
leds { leds {
...@@ -87,8 +48,4 @@ wireless2 { ...@@ -87,8 +48,4 @@ wireless2 {
gpios = <&gpio 18 GPIO_ACTIVE_LOW>; gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
}; };
}; };
aliases {
pip = &pip;
};
}; };
/*
* Device tree source for D-Link DSR-500N/1000N (common parts).
*
* Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "octeon_3xxx.dtsi"
/ {
soc@0 {
smi0: mdio@1180000001800 {
phy8: ethernet-phy@8 {
reg = <8>;
compatible = "ethernet-phy-ieee802.3-c22";
};
};
pip: pip@11800a0000000 {
interface@0 {
ethernet@0 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
ethernet@1 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
ethernet@2 {
phy-handle = <&phy8>;
};
};
};
twsi0: i2c@1180000001000 {
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
};
};
usbn: usbn@1180068000000 {
refclk-frequency = <12000000>;
refclk-type = "crystal";
};
};
aliases {
pip = &pip;
};
};
/*
* Device tree source for D-Link DSR-500N.
*
* Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "dlink_dsr-500n-1000n.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "dlink,dsr-500n";
compatible = "dlink,dsr-500n", "cavium,octeon-3860";
soc@0 {
uart0: serial@1180000000800 {
clock-frequency = <300000000>;
};
};
leds {
compatible = "gpio-leds";
usb {
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
wps {
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wireless {
label = "2.4g";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
};
dtb-$(CONFIG_MIPS_MALTA) += malta.dtb dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb dtb-$(CONFIG_LEGACY_BOARD_SEAD3) += sead3.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
......
/dts-v1/; /dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/mips-gic.h>
/memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */ /memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */
/memreserve/ 0x00001000 0x000ef000; /* YAMON */ /memreserve/ 0x00001000 0x000ef000; /* YAMON */
/memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */ /memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */
...@@ -8,4 +11,100 @@ / { ...@@ -8,4 +11,100 @@ / {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
compatible = "mti,malta"; compatible = "mti,malta";
cpu_intc: interrupt-controller {
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
gic: interrupt-controller@1bdc0000 {
compatible = "mti,gic";
reg = <0x1bdc0000 0x20000>;
interrupt-controller;
#interrupt-cells = <3>;
/*
* Declare the interrupt-parent even though the mti,gic
* binding doesn't require it, such that the kernel can
* figure out that cpu_intc is the root interrupt
* controller & should be probed first.
*/
interrupt-parent = <&cpu_intc>;
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
};
};
i8259: interrupt-controller@20 {
compatible = "intel,i8259";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
};
flash@1e000000 {
compatible = "intel,dt28f160", "cfi-flash";
reg = <0x1e000000 0x400000>;
bank-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
yamon@0 {
label = "YAMON";
reg = <0x0 0x100000>;
read-only;
};
user-fs@100000 {
label = "User FS";
reg = <0x100000 0x2e0000>;
};
board-config@3e0000 {
label = "Board Config";
reg = <0x3e0000 0x20000>;
read-only;
};
};
};
fpga_regs: system-controller@1f000000 {
compatible = "mti,malta-fpga", "syscon", "simple-mfd";
reg = <0x1f000000 0x1000>;
reboot {
compatible = "syscon-reboot";
regmap = <&fpga_regs>;
offset = <0x500>;
mask = <0x4d>;
};
};
isa {
compatible = "isa";
#address-cells = <2>;
#size-cells = <1>;
ranges = <1 0 0 0x1000>;
rtc@70 {
compatible = "motorola,mc146818";
reg = <1 0x70 0x8>;
interrupt-parent = <&i8259>;
interrupts = <8>;
};
};
}; };
...@@ -4,10 +4,23 @@ ...@@ -4,10 +4,23 @@
/memreserve/ 0x00001000 0x000ef000; // ROM data /memreserve/ 0x00001000 0x000ef000; // ROM data
/memreserve/ 0x000f0000 0x004cc000; // reserved /memreserve/ 0x000f0000 0x004cc000; // reserved
#include <dt-bindings/interrupt-controller/mips-gic.h>
/ { / {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
compatible = "mti,sead-3"; compatible = "mti,sead-3";
model = "MIPS SEAD-3";
interrupt-parent = <&gic>;
chosen {
stdout-path = "uart1:115200";
};
aliases {
uart0 = &uart0;
uart1 = &uart1;
};
cpus { cpus {
cpu@0 { cpu@0 {
...@@ -19,4 +32,229 @@ memory { ...@@ -19,4 +32,229 @@ memory {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x08000000>; reg = <0x0 0x08000000>;
}; };
cpu_intc: interrupt-controller {
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
gic: interrupt-controller@1b1c0000 {
compatible = "mti,gic";
reg = <0x1b1c0000 0x20000>;
interrupt-controller;
#interrupt-cells = <3>;
/*
* Declare the interrupt-parent even though the mti,gic
* binding doesn't require it, such that the kernel can
* figure out that cpu_intc is the root interrupt
* controller & should be probed first.
*/
interrupt-parent = <&cpu_intc>;
timer {
compatible = "mti,gic-timer";
interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
};
};
ehci@1b200000 {
compatible = "generic-ehci";
reg = <0x1b200000 0x1000>;
interrupts = <0>; /* GIC 0 or CPU 6 */
has-transaction-translator;
};
flash@1c000000 {
compatible = "intel,28f128j3", "cfi-flash";
reg = <0x1c000000 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
bank-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
user-fs@0 {
label = "User FS";
reg = <0x0 0x1fc0000>;
};
board-config@3e0000 {
label = "Board Config";
reg = <0x1fc0000 0x40000>;
};
};
};
fpga_regs: system-controller@1f000000 {
compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
reg = <0x1f000000 0x200>;
reboot {
compatible = "syscon-reboot";
regmap = <&fpga_regs>;
offset = <0x50>;
mask = <0x4d>;
};
poweroff {
compatible = "restart-poweroff";
};
};
system-controller@1f000200 {
compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
reg = <0x1f000200 0x300>;
led@10.0 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x1>;
label = "pled0";
};
led@10.1 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x2>;
label = "pled1";
};
led@10.2 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x4>;
label = "pled2";
};
led@10.3 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x8>;
label = "pled3";
};
led@10.4 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x10>;
label = "pled4";
};
led@10.5 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x20>;
label = "pled5";
};
led@10.6 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x40>;
label = "pled6";
};
led@10.7 {
compatible = "register-bit-led";
offset = <0x10>;
mask = <0x80>;
label = "pled7";
};
led@18.0 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x1>;
label = "fled0";
};
led@18.1 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x2>;
label = "fled1";
};
led@18.2 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x4>;
label = "fled2";
};
led@18.3 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x8>;
label = "fled3";
};
led@18.4 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x10>;
label = "fled4";
};
led@18.5 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x20>;
label = "fled5";
};
led@18.6 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x40>;
label = "fled6";
};
led@18.7 {
compatible = "register-bit-led";
offset = <0x18>;
mask = <0x80>;
label = "fled7";
};
lcd@200 {
compatible = "mti,sead3-lcd";
offset = <0x200>;
};
};
/* UART connected to FTDI & miniUSB socket */
uart0: uart@1f000900 {
compatible = "ns16550a";
reg = <0x1f000900 0x20>;
reg-io-width = <4>;
reg-shift = <2>;
clock-frequency = <14745600>;
interrupts = <3>; /* GIC 3 or CPU 4 */
no-loopback-test;
};
/* UART connected to RS232 socket */
uart1: uart@1f000800 {
compatible = "ns16550a";
reg = <0x1f000800 0x20>;
reg-io-width = <4>;
reg-shift = <2>;
clock-frequency = <14745600>;
interrupts = <2>; /* GIC 2 or CPU 4 */
no-loopback-test;
};
eth@1f010000 {
compatible = "smsc,lan9115";
reg = <0x1f010000 0x10000>;
reg-io-width = <4>;
interrupts = <0>; /* GIC 0 or CPU 6 */
phy-mode = "mii";
smsc,irq-push-pull;
smsc,save-mac-address;
};
}; };
...@@ -33,8 +33,6 @@ ...@@ -33,8 +33,6 @@
#include <asm/octeon/cvmx-config.h> #include <asm/octeon/cvmx-config.h>
#include <asm/octeon/cvmx-mdio.h>
#include <asm/octeon/cvmx-pko.h> #include <asm/octeon/cvmx-pko.h>
#include <asm/octeon/cvmx-helper.h> #include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-board.h> #include <asm/octeon/cvmx-helper-board.h>
...@@ -243,8 +241,7 @@ int __cvmx_helper_rgmii_enable(int interface) ...@@ -243,8 +241,7 @@ int __cvmx_helper_rgmii_enable(int interface)
/* enable the ports now */ /* enable the ports now */
for (port = 0; port < num_ports; port++) { for (port = 0; port < num_ports; port++) {
union cvmx_gmxx_prtx_cfg gmx_cfg; union cvmx_gmxx_prtx_cfg gmx_cfg;
cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port
(interface, port));
gmx_cfg.u64 = gmx_cfg.u64 =
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface)); cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
gmx_cfg.s.en = 1; gmx_cfg.s.en = 1;
......
...@@ -34,7 +34,6 @@ ...@@ -34,7 +34,6 @@
#include <asm/octeon/cvmx-config.h> #include <asm/octeon/cvmx-config.h>
#include <asm/octeon/cvmx-mdio.h>
#include <asm/octeon/cvmx-helper.h> #include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-board.h> #include <asm/octeon/cvmx-helper-board.h>
......
...@@ -234,8 +234,6 @@ int __cvmx_helper_xaui_enable(int interface) ...@@ -234,8 +234,6 @@ int __cvmx_helper_xaui_enable(int interface)
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64); cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64); cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
/* (8) Enable packet reception */ /* (8) Enable packet reception */
xauiMiscCtl.s.gmxeno = 0; xauiMiscCtl.s.gmxeno = 0;
cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
......
...@@ -841,7 +841,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) ...@@ -841,7 +841,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
int retry_cnt; int retry_cnt;
int retry_loop_cnt; int retry_loop_cnt;
int i; int i;
cvmx_helper_link_info_t link_info;
/* Save values for restore at end */ /* Save values for restore at end */
uint64_t prtx_cfg = uint64_t prtx_cfg =
...@@ -1002,15 +1001,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) ...@@ -1002,15 +1001,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
(INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
frame_max); frame_max);
cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0); cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
/* Set link to down so autonegotiation will set it up again */
link_info.u64 = 0;
cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
/*
* Bring the link back up as autonegotiation is not done in
* user applications.
*/
cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
CVMX_SYNC; CVMX_SYNC;
if (num_segs) if (num_segs)
......
...@@ -65,7 +65,8 @@ EXPORT_SYMBOL(octeon_should_swizzle_table); ...@@ -65,7 +65,8 @@ EXPORT_SYMBOL(octeon_should_swizzle_table);
extern void pci_console_init(const char *arg); extern void pci_console_init(const char *arg);
#endif #endif
static unsigned long long MAX_MEMORY = 512ull << 20; static unsigned long long max_memory = ULLONG_MAX;
static unsigned long long reserve_low_mem;
DEFINE_SEMAPHORE(octeon_bootbus_sem); DEFINE_SEMAPHORE(octeon_bootbus_sem);
EXPORT_SYMBOL(octeon_bootbus_sem); EXPORT_SYMBOL(octeon_bootbus_sem);
...@@ -75,7 +76,6 @@ struct octeon_boot_descriptor *octeon_boot_desc_ptr; ...@@ -75,7 +76,6 @@ struct octeon_boot_descriptor *octeon_boot_desc_ptr;
struct cvmx_bootinfo *octeon_bootinfo; struct cvmx_bootinfo *octeon_bootinfo;
EXPORT_SYMBOL(octeon_bootinfo); EXPORT_SYMBOL(octeon_bootinfo);
static unsigned long long RESERVE_LOW_MEM = 0ull;
#ifdef CONFIG_KEXEC #ifdef CONFIG_KEXEC
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
/* /*
...@@ -125,18 +125,18 @@ static void kexec_bootmem_init(uint64_t mem_size, uint32_t low_reserved_bytes) ...@@ -125,18 +125,18 @@ static void kexec_bootmem_init(uint64_t mem_size, uint32_t low_reserved_bytes)
bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER; bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER;
bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER; bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER;
addr = (OCTEON_DDR0_BASE + RESERVE_LOW_MEM + low_reserved_bytes); addr = (OCTEON_DDR0_BASE + reserve_low_mem + low_reserved_bytes);
bootmem_desc->head_addr = 0; bootmem_desc->head_addr = 0;
if (mem_size <= OCTEON_DDR0_SIZE) { if (mem_size <= OCTEON_DDR0_SIZE) {
__cvmx_bootmem_phy_free(addr, __cvmx_bootmem_phy_free(addr,
mem_size - RESERVE_LOW_MEM - mem_size - reserve_low_mem -
low_reserved_bytes, 0); low_reserved_bytes, 0);
return; return;
} }
__cvmx_bootmem_phy_free(addr, __cvmx_bootmem_phy_free(addr,
OCTEON_DDR0_SIZE - RESERVE_LOW_MEM - OCTEON_DDR0_SIZE - reserve_low_mem -
low_reserved_bytes, 0); low_reserved_bytes, 0);
mem_size -= OCTEON_DDR0_SIZE; mem_size -= OCTEON_DDR0_SIZE;
...@@ -857,15 +857,15 @@ void __init prom_init(void) ...@@ -857,15 +857,15 @@ void __init prom_init(void)
/* Default to 64MB in the simulator to speed things up */ /* Default to 64MB in the simulator to speed things up */
if (octeon_is_simulation()) if (octeon_is_simulation())
MAX_MEMORY = 64ull << 20; max_memory = 64ull << 20;
arg = strstr(arcs_cmdline, "mem="); arg = strstr(arcs_cmdline, "mem=");
if (arg) { if (arg) {
MAX_MEMORY = memparse(arg + 4, &p); max_memory = memparse(arg + 4, &p);
if (MAX_MEMORY == 0) if (max_memory == 0)
MAX_MEMORY = 32ull << 30; max_memory = 32ull << 30;
if (*p == '@') if (*p == '@')
RESERVE_LOW_MEM = memparse(p + 1, &p); reserve_low_mem = memparse(p + 1, &p);
} }
arcs_cmdline[0] = 0; arcs_cmdline[0] = 0;
...@@ -875,11 +875,11 @@ void __init prom_init(void) ...@@ -875,11 +875,11 @@ void __init prom_init(void)
cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]); cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
if ((strncmp(arg, "MEM=", 4) == 0) || if ((strncmp(arg, "MEM=", 4) == 0) ||
(strncmp(arg, "mem=", 4) == 0)) { (strncmp(arg, "mem=", 4) == 0)) {
MAX_MEMORY = memparse(arg + 4, &p); max_memory = memparse(arg + 4, &p);
if (MAX_MEMORY == 0) if (max_memory == 0)
MAX_MEMORY = 32ull << 30; max_memory = 32ull << 30;
if (*p == '@') if (*p == '@')
RESERVE_LOW_MEM = memparse(p + 1, &p); reserve_low_mem = memparse(p + 1, &p);
#ifdef CONFIG_KEXEC #ifdef CONFIG_KEXEC
} else if (strncmp(arg, "crashkernel=", 12) == 0) { } else if (strncmp(arg, "crashkernel=", 12) == 0) {
crashk_size = memparse(arg+12, &p); crashk_size = memparse(arg+12, &p);
...@@ -971,13 +971,13 @@ void __init plat_mem_setup(void) ...@@ -971,13 +971,13 @@ void __init plat_mem_setup(void)
* to consistently work. * to consistently work.
*/ */
mem_alloc_size = 4 << 20; mem_alloc_size = 4 << 20;
if (mem_alloc_size > MAX_MEMORY) if (mem_alloc_size > max_memory)
mem_alloc_size = MAX_MEMORY; mem_alloc_size = max_memory;
/* Crashkernel ignores bootmem list. It relies on mem=X@Y option */ /* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
#ifdef CONFIG_CRASH_DUMP #ifdef CONFIG_CRASH_DUMP
add_memory_region(RESERVE_LOW_MEM, MAX_MEMORY, BOOT_MEM_RAM); add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM);
total += MAX_MEMORY; total += max_memory;
#else #else
#ifdef CONFIG_KEXEC #ifdef CONFIG_KEXEC
if (crashk_size > 0) { if (crashk_size > 0) {
...@@ -992,7 +992,7 @@ void __init plat_mem_setup(void) ...@@ -992,7 +992,7 @@ void __init plat_mem_setup(void)
*/ */
cvmx_bootmem_lock(); cvmx_bootmem_lock();
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX) while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
&& (total < MAX_MEMORY)) { && (total < max_memory)) {
memory = cvmx_bootmem_phy_alloc(mem_alloc_size, memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&_end), -1, __pa_symbol(&_end), -1,
0x100000, 0x100000,
......
CONFIG_CPU_MIPS32_R1=y
CONFIG_HIGHMEM=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_MIPS_O32_FP64_SUPPORT=y
CONFIG_HIGHMEM=y
CONFIG_CPU_MIPS32_R6=y
CONFIG_HIGHMEM=y
CONFIG_CPU_MIPS64_R1=y
CONFIG_64BIT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_CPU_MIPS64_R2=y
CONFIG_MIPS_O32_FP64_SUPPORT=y
CONFIG_64BIT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_CPU_MIPS64_R6=y
CONFIG_64BIT=y
CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_LEGACY_BOARD_SEAD3=y
CONFIG_AUXDISPLAY=y
CONFIG_IMG_ASCII_LCD=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_SYSCON=y
CONFIG_MMC=y
CONFIG_MMC_SPI=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MICROMIPS=y
CONFIG_MIPS_O32_FP64_SUPPORT=y
CONFIG_HIGHMEM=y
CONFIG_MIPS_GENERIC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_CPS=y
CONFIG_CPU_HAS_MSA=y
CONFIG_HIGHMEM=y
CONFIG_NR_CPUS=2
CONFIG_MIPS_O32_FP64_SUPPORT=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ_IDLE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_BLK_CGROUP=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_TRIM_UNUSED_KSYMS=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_NETFILTER=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_SCSI=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_HW_RANDOM=y
# CONFIG_HWMON is not set
CONFIG_MFD_SYSCON=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MIPS_PLATFORM_DEVICES is not set
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_FANOTIFY=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_MIPS_SEAD3=y CONFIG_MACH_LOONGSON32=y
CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_LOONGSON1_LS1C=y
CONFIG_CPU_MIPS32_R2=y CONFIG_PREEMPT=y
CONFIG_HZ_100=y # CONFIG_SECCOMP is not set
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_XZ=y
CONFIG_SYSVIPC=y CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15 CONFIG_LOG_BUF_SHIFT=16
CONFIG_EMBEDDED=y CONFIG_NAMESPACES=y
CONFIG_SLAB=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PROFILING=y CONFIG_EXPERT=y
CONFIG_OPROFILE=y CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y CONFIG_NET=y
CONFIG_PACKET=y CONFIG_PACKET=y
CONFIG_UNIX=y CONFIG_UNIX=y
CONFIG_INET=y CONFIG_INET=y
CONFIG_IP_PNP=y CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set # CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set # CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set # CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_MTD=y CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y CONFIG_MTD_NAND=y
CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_NAND_LOONGSON1=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_UBI=y CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_SCSI=m
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set # CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y # CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_WLAN is not set # CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set # CONFIG_SERIO is not set
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=32 CONFIG_LEGACY_PTY_COUNT=8
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_HW_RANDOM is not set # CONFIG_HW_RANDOM is not set
CONFIG_I2C=y CONFIG_GPIOLIB=y
# CONFIG_I2C_COMPAT is not set CONFIG_GPIO_LOONGSON1=y
CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_SPI=y
CONFIG_SENSORS_ADT7475=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set # CONFIG_VGA_CONSOLE is not set
CONFIG_HID_GENERIC=m
CONFIG_USB_HID=m
CONFIG_USB=y CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_STORAGE=y CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_MMC=y CONFIG_USB_STORAGE=m
CONFIG_MMC_DEBUG=y CONFIG_USB_SERIAL=m
CONFIG_MMC_SPI=y CONFIG_USB_SERIAL_PL2303=m
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_LOONGSON1=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_XFS_FS=y CONFIG_EXT3_FS_SECURITY=y
CONFIG_XFS_QUOTA=y # CONFIG_DNOTIFY is not set
CONFIG_XFS_POSIX_ACL=y CONFIG_VFAT_FS=y
CONFIG_QUOTA=y CONFIG_PROC_KCORE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_ATIME_SUPPORT=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_1=y CONFIG_DYNAMIC_DEBUG=y
CONFIG_NLS_ISO8859_15=y # CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_NLS_UTF8=y # CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set # CONFIG_FTRACE is not set
CONFIG_CRYPTO_CBC=y # CONFIG_EARLY_PRINTK is not set
CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_ECHAINIV is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set # CONFIG_CRYPTO_HW is not set
...@@ -230,7 +230,7 @@ CONFIG_MTD_CFI=y ...@@ -230,7 +230,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_FD=m
...@@ -318,6 +318,8 @@ CONFIG_LIBERTAS=m ...@@ -318,6 +318,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_CIRRUS=y CONFIG_FB_CIRRUS=y
......
...@@ -235,7 +235,7 @@ CONFIG_MTD_CFI=y ...@@ -235,7 +235,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_FD=m
...@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m ...@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_CIRRUS=y CONFIG_FB_CIRRUS=y
......
...@@ -234,7 +234,7 @@ CONFIG_MTD_CFI=y ...@@ -234,7 +234,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_FD=m
...@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m ...@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_CIRRUS=y CONFIG_FB_CIRRUS=y
......
...@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=4 ...@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y CONFIG_FIRMWARE_EDID=y
......
...@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=16 ...@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y CONFIG_FB=y
......
...@@ -134,6 +134,8 @@ CONFIG_LEGACY_PTY_COUNT=4 ...@@ -134,6 +134,8 @@ CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y CONFIG_FIRMWARE_EDID=y
......
...@@ -137,6 +137,8 @@ CONFIG_LEGACY_PTY_COUNT=4 ...@@ -137,6 +137,8 @@ CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y CONFIG_FB=y
......
...@@ -131,6 +131,8 @@ CONFIG_LEGACY_PTY_COUNT=16 ...@@ -131,6 +131,8 @@ CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y CONFIG_FB=y
......
...@@ -231,7 +231,7 @@ CONFIG_MTD_CFI=y ...@@ -231,7 +231,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_UBI=m CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_FD=m
...@@ -326,6 +326,8 @@ CONFIG_LIBERTAS=m ...@@ -326,6 +326,8 @@ CONFIG_LIBERTAS=m
# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
CONFIG_FB=y CONFIG_FB=y
CONFIG_FB_CIRRUS=y CONFIG_FB_CIRRUS=y
......
...@@ -29,7 +29,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y ...@@ -29,7 +29,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set # CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y CONFIG_PROFILING=y
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_MODULES=y CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
...@@ -264,7 +263,6 @@ CONFIG_DMADEVICES=y ...@@ -264,7 +263,6 @@ CONFIG_DMADEVICES=y
CONFIG_IMG_MDC_DMA=y CONFIG_IMG_MDC_DMA=y
CONFIG_STAGING=y CONFIG_STAGING=y
CONFIG_ASHMEM=y CONFIG_ASHMEM=y
# CONFIG_ANDROID_TIMED_OUTPUT is not set
# CONFIG_IOMMU_SUPPORT is not set # CONFIG_IOMMU_SUPPORT is not set
CONFIG_MEMORY=y CONFIG_MEMORY=y
CONFIG_IIO=y CONFIG_IIO=y
......
CONFIG_MIPS_SEAD3=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MICROMIPS=y
CONFIG_HZ_100=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_SPI=y
CONFIG_SENSORS_ADT7475=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_QUOTA=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
if MIPS_GENERIC
config LEGACY_BOARDS
bool
help
Select this from your board if the board must use a legacy, non-UHI,
boot protocol. This will cause the kernel to scan through the list of
supported machines calling their detect functions in turn if the
kernel is booted without being provided with an FDT via the UHI
boot protocol.
config LEGACY_BOARD_SEAD3
bool "Support MIPS SEAD-3 boards"
select LEGACY_BOARDS
help
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
endif
#
# Copyright (C) 2016 Imagination Technologies
# Author: Paul Burton <paul.burton@imgtec.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
obj-y += init.o
obj-y += irq.o
obj-y += proc.o
obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
#
# Copyright (C) 2016 Imagination Technologies
# Author: Paul Burton <paul.burton@imgtec.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
platform-$(CONFIG_MIPS_GENERIC) += generic/
cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
/*
* Copyright (C) 2016 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#define pr_fmt(fmt) "sead3: " fmt
#include <linux/errno.h>
#include <linux/libfdt.h>
#include <linux/printk.h>
#include <asm/fw/fw.h>
#include <asm/io.h>
#include <asm/machine.h>
#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
#define SEAD_CONFIG_GIC_PRESENT BIT(1)
#define MIPS_REVISION CKSEG1ADDR(0x1fc00010)
#define MIPS_REVISION_MACHINE (0xf << 4)
#define MIPS_REVISION_MACHINE_SEAD3 (0x4 << 4)
static __init bool sead3_detect(void)
{
uint32_t rev;
rev = __raw_readl((void *)MIPS_REVISION);
return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
}
static __init int append_cmdline(void *fdt)
{
int err, chosen_off;
/* find or add chosen node */
chosen_off = fdt_path_offset(fdt, "/chosen");
if (chosen_off == -FDT_ERR_NOTFOUND)
chosen_off = fdt_path_offset(fdt, "/chosen@0");
if (chosen_off == -FDT_ERR_NOTFOUND)
chosen_off = fdt_add_subnode(fdt, 0, "chosen");
if (chosen_off < 0) {
pr_err("Unable to find or add DT chosen node: %d\n",
chosen_off);
return chosen_off;
}
err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
if (err) {
pr_err("Unable to set bootargs property: %d\n", err);
return err;
}
return 0;
}
static __init int append_memory(void *fdt)
{
unsigned long phys_memsize, memsize;
__be32 mem_array[2];
int err, mem_off;
char *var;
/* find memory size from the bootloader environment */
var = fw_getenv("memsize");
if (var) {
err = kstrtoul(var, 0, &phys_memsize);
if (err) {
pr_err("Failed to read memsize env variable '%s'\n",
var);
return -EINVAL;
}
} else {
pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
phys_memsize = 32 << 20;
}
/* default to using all available RAM */
memsize = phys_memsize;
/* allow the user to override the usable memory */
var = strstr(arcs_cmdline, "memsize=");
if (var)
memsize = memparse(var + strlen("memsize="), NULL);
/* if the user says there's more RAM than we thought, believe them */
phys_memsize = max_t(unsigned long, phys_memsize, memsize);
/* find or add a memory node */
mem_off = fdt_path_offset(fdt, "/memory");
if (mem_off == -FDT_ERR_NOTFOUND)
mem_off = fdt_add_subnode(fdt, 0, "memory");
if (mem_off < 0) {
pr_err("Unable to find or add memory DT node: %d\n", mem_off);
return mem_off;
}
err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
if (err) {
pr_err("Unable to set memory node device_type: %d\n", err);
return err;
}
mem_array[0] = 0;
mem_array[1] = cpu_to_be32(phys_memsize);
err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
if (err) {
pr_err("Unable to set memory regs property: %d\n", err);
return err;
}
mem_array[0] = 0;
mem_array[1] = cpu_to_be32(memsize);
err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
mem_array, sizeof(mem_array));
if (err) {
pr_err("Unable to set linux,usable-memory property: %d\n", err);
return err;
}
return 0;
}
static __init int remove_gic(void *fdt)
{
const unsigned int cpu_ehci_int = 2;
const unsigned int cpu_uart_int = 4;
const unsigned int cpu_eth_int = 6;
int gic_off, cpu_off, uart_off, eth_off, ehci_off, err;
uint32_t cfg, cpu_phandle;
/* leave the GIC node intact if a GIC is present */
cfg = __raw_readl((uint32_t *)SEAD_CONFIG);
if (cfg & SEAD_CONFIG_GIC_PRESENT)
return 0;
gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
if (gic_off < 0) {
pr_err("unable to find DT GIC node: %d\n", gic_off);
return gic_off;
}
err = fdt_nop_node(fdt, gic_off);
if (err) {
pr_err("unable to nop GIC node\n");
return err;
}
cpu_off = fdt_node_offset_by_compatible(fdt, -1,
"mti,cpu-interrupt-controller");
if (cpu_off < 0) {
pr_err("unable to find CPU intc node: %d\n", cpu_off);
return cpu_off;
}
cpu_phandle = fdt_get_phandle(fdt, cpu_off);
if (!cpu_phandle) {
pr_err("unable to get CPU intc phandle\n");
return -EINVAL;
}
err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
if (err) {
pr_err("unable to set root interrupt-parent: %d\n", err);
return err;
}
uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
while (uart_off >= 0) {
err = fdt_setprop_u32(fdt, uart_off, "interrupts",
cpu_uart_int);
if (err) {
pr_err("unable to set UART interrupts property: %d\n",
err);
return err;
}
uart_off = fdt_node_offset_by_compatible(fdt, uart_off,
"ns16550a");
}
if (uart_off != -FDT_ERR_NOTFOUND) {
pr_err("error searching for UART DT node: %d\n", uart_off);
return uart_off;
}
eth_off = fdt_node_offset_by_compatible(fdt, -1, "smsc,lan9115");
if (eth_off < 0) {
pr_err("unable to find ethernet DT node: %d\n", eth_off);
return eth_off;
}
err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
if (err) {
pr_err("unable to set ethernet interrupts property: %d\n", err);
return err;
}
ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
if (ehci_off < 0) {
pr_err("unable to find EHCI DT node: %d\n", ehci_off);
return ehci_off;
}
err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
if (err) {
pr_err("unable to set EHCI interrupts property: %d\n", err);
return err;
}
return 0;
}
static __init int serial_config(void *fdt)
{
const char *yamontty, *mode_var;
char mode_var_name[9], path[18], parity;
unsigned int uart, baud, stop_bits;
bool hw_flow;
int chosen_off, err;
yamontty = fw_getenv("yamontty");
if (!yamontty || !strcmp(yamontty, "tty0")) {
uart = 0;
} else if (!strcmp(yamontty, "tty1")) {
uart = 1;
} else {
pr_warn("yamontty environment variable '%s' invalid\n",
yamontty);
uart = 0;
}
baud = stop_bits = 0;
parity = 0;
hw_flow = false;
snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
mode_var = fw_getenv(mode_var_name);
if (mode_var) {
while (mode_var[0] >= '0' && mode_var[0] <= '9') {
baud *= 10;
baud += mode_var[0] - '0';
mode_var++;
}
if (mode_var[0] == ',')
mode_var++;
if (mode_var[0])
parity = mode_var[0];
if (mode_var[0] == ',')
mode_var++;
if (mode_var[0])
stop_bits = mode_var[0] - '0';
if (mode_var[0] == ',')
mode_var++;
if (!strcmp(mode_var, "hw"))
hw_flow = true;
}
if (!baud)
baud = 38400;
if (parity != 'e' && parity != 'n' && parity != 'o')
parity = 'n';
if (stop_bits != 7 && stop_bits != 8)
stop_bits = 8;
WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
uart, baud, parity, stop_bits,
hw_flow ? "r" : "") >= sizeof(path));
/* find or add chosen node */
chosen_off = fdt_path_offset(fdt, "/chosen");
if (chosen_off == -FDT_ERR_NOTFOUND)
chosen_off = fdt_path_offset(fdt, "/chosen@0");
if (chosen_off == -FDT_ERR_NOTFOUND)
chosen_off = fdt_add_subnode(fdt, 0, "chosen");
if (chosen_off < 0) {
pr_err("Unable to find or add DT chosen node: %d\n",
chosen_off);
return chosen_off;
}
err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
if (err) {
pr_err("Unable to set stdout-path property: %d\n", err);
return err;
}
return 0;
}
static __init const void *sead3_fixup_fdt(const void *fdt,
const void *match_data)
{
static unsigned char fdt_buf[16 << 10] __initdata;
int err;
if (fdt_check_header(fdt))
panic("Corrupt DT");
/* if this isn't SEAD3, something went wrong */
BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
fw_init_cmdline();
err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
if (err)
panic("Unable to open FDT: %d", err);
err = append_cmdline(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
err = append_memory(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
err = remove_gic(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
err = serial_config(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
err = fdt_pack(fdt_buf);
if (err)
panic("Unable to pack FDT: %d\n", err);
return fdt_buf;
}
static __init unsigned int sead3_measure_hpt_freq(void)
{
void __iomem *status_reg = (void __iomem *)0xbf000410;
unsigned int freq, orig, tick = 0;
unsigned long flags;
local_irq_save(flags);
orig = readl(status_reg) & 0x2; /* get original sample */
/* wait for transition */
while ((readl(status_reg) & 0x2) == orig)
;
orig = orig ^ 0x2; /* flip the bit */
write_c0_count(0);
/* wait 1 second (the sampling clock transitions every 10ms) */
while (tick < 100) {
/* wait for transition */
while ((readl(status_reg) & 0x2) == orig)
;
orig = orig ^ 0x2; /* flip the bit */
tick++;
}
freq = read_c0_count();
local_irq_restore(flags);
return freq;
}
extern char __dtb_sead3_begin[];
MIPS_MACHINE(sead3) = {
.fdt = __dtb_sead3_begin,
.detect = sead3_detect,
.fixup_fdt = sead3_fixup_fdt,
.measure_hpt_freq = sead3_measure_hpt_freq,
};
/*
* Copyright (C) 2016 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <asm/fw/fw.h>
#include <asm/irq_cpu.h>
#include <asm/machine.h>
#include <asm/mips-cpc.h>
#include <asm/prom.h>
#include <asm/smp-ops.h>
#include <asm/time.h>
static __initdata const void *fdt;
static __initdata const struct mips_machine *mach;
static __initdata const void *mach_match_data;
void __init prom_init(void)
{
const struct mips_machine *check_mach;
const struct of_device_id *match;
if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
/*
* We booted using the UHI boot protocol, so we have been
* provided with the appropriate device tree for the board.
* Make use of it & search for any machine struct based upon
* the root compatible string.
*/
fdt = (void *)fw_arg1;
for_each_mips_machine(check_mach) {
match = mips_machine_is_compatible(check_mach, fdt);
if (match) {
mach = check_mach;
mach_match_data = match->data;
break;
}
}
} else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
/*
* We weren't booted using the UHI boot protocol, but do
* support some number of boards with legacy boot protocols.
* Attempt to find the right one.
*/
for_each_mips_machine(check_mach) {
if (!check_mach->detect)
continue;
if (!check_mach->detect())
continue;
mach = check_mach;
}
/*
* If we don't recognise the machine then we can't continue, so
* die here.
*/
BUG_ON(!mach);
/* Retrieve the machine's FDT */
fdt = mach->fdt;
}
BUG_ON(!fdt);
}
void __init *plat_get_fdt(void)
{
return (void *)fdt;
}
void __init plat_mem_setup(void)
{
if (mach && mach->fixup_fdt)
fdt = mach->fixup_fdt(fdt, mach_match_data);
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
__dt_setup_arch((void *)fdt);
}
void __init device_tree_init(void)
{
int err;
unflatten_and_copy_device_tree();
mips_cpc_probe();
err = register_cps_smp_ops();
if (err)
err = register_up_smp_ops();
}
void __init plat_time_init(void)
{
struct device_node *np;
struct clk *clk;
of_clk_init(NULL);
if (!cpu_has_counter) {
mips_hpt_frequency = 0;
} else if (mach && mach->measure_hpt_freq) {
mips_hpt_frequency = mach->measure_hpt_freq();
} else {
np = of_get_cpu_node(0, NULL);
if (!np) {
pr_err("Failed to get CPU node\n");
return;
}
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
return;
}
mips_hpt_frequency = clk_get_rate(clk);
clk_put(clk);
switch (boot_cpu_type()) {
case CPU_20KC:
case CPU_25KF:
/* The counter runs at the CPU clock rate */
break;
default:
/* The counter runs at half the CPU clock rate */
mips_hpt_frequency /= 2;
break;
}
}
clocksource_probe();
}
void __init arch_init_irq(void)
{
struct device_node *intc_node;
intc_node = of_find_compatible_node(NULL, NULL,
"mti,cpu-interrupt-controller");
if (!cpu_has_veic && !intc_node)
mips_cpu_irq_init();
irqchip_init();
}
static int __init publish_devices(void)
{
if (!of_have_populated_dt())
panic("Device-tree not present");
if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
panic("Failed to populate DT");
return 0;
}
arch_initcall(publish_devices);
void __init prom_free_prom_memory(void)
{
}
/*
* Copyright (C) 2016 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/irqchip/mips-gic.h>
#include <linux/types.h>
#include <asm/irq.h>
int get_c0_fdc_int(void)
{
int mips_cpu_fdc_irq;
if (cpu_has_veic)
panic("Unimplemented!");
else if (gic_present)
mips_cpu_fdc_irq = gic_get_c0_fdc_int();
else if (cp0_fdc_irq >= 0)
mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
else
mips_cpu_fdc_irq = -1;
return mips_cpu_fdc_irq;
}
int get_c0_perfcount_int(void)
{
int mips_cpu_perf_irq;
if (cpu_has_veic)
panic("Unimplemented!");
else if (gic_present)
mips_cpu_perf_irq = gic_get_c0_perfcount_int();
else if (cp0_perfcount_irq >= 0)
mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
else
mips_cpu_perf_irq = -1;
return mips_cpu_perf_irq;
}
unsigned int get_c0_compare_int(void)
{
int mips_cpu_timer_irq;
if (cpu_has_veic)
panic("Unimplemented!");
else if (gic_present)
mips_cpu_timer_irq = gic_get_c0_compare_int();
else
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
return mips_cpu_timer_irq;
}
/*
* Copyright (C) 2016 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/of.h>
#include <asm/bootinfo.h>
const char *get_system_type(void)
{
const char *str;
int err;
err = of_property_read_string(of_root, "model", &str);
if (!err)
return str;
err = of_property_read_string_index(of_root, "compatible", 0, &str);
if (!err)
return str;
return "Unknown";
}
/dts-v1/;
/ {
description = KERNEL_NAME;
#address-cells = <ADDR_CELLS>;
images {
kernel@0 {
description = KERNEL_NAME;
data = /incbin/(VMLINUX_BINARY);
type = "kernel";
arch = "mips";
os = "linux";
compression = VMLINUX_COMPRESSION;
load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
hash@0 {
algo = "sha1";
};
};
};
configurations {
default = "conf@default";
conf@default {
description = "Generic Linux kernel";
kernel = "kernel@0";
};
};
};
...@@ -126,8 +126,7 @@ ...@@ -126,8 +126,7 @@
#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p)) #define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p)) #define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK) #define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \ #define PHYS_TO_XKPHYS(cm, a) (XKPHYS | (_ACAST64_(cm) << 59) | (a))
(_CONST64_(cm) << 59) | (a))
/* /*
* The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting
......
...@@ -10,6 +10,102 @@ ...@@ -10,6 +10,102 @@
#include <asm/addrspace.h> #include <asm/addrspace.h>
/*
* Sync types defined by the MIPS architecture (document MD00087 table 6.5)
* These values are used with the sync instruction to perform memory barriers.
* Types of ordering guarantees available through the SYNC instruction:
* - Completion Barriers
* - Ordering Barriers
* As compared to the completion barrier, the ordering barrier is a
* lighter-weight operation as it does not require the specified instructions
* before the SYNC to be already completed. Instead it only requires that those
* specified instructions which are subsequent to the SYNC in the instruction
* stream are never re-ordered for processing ahead of the specified
* instructions which are before the SYNC in the instruction stream.
* This potentially reduces how many cycles the barrier instruction must stall
* before it completes.
* Implementations that do not use any of the non-zero values of stype to define
* different barriers, such as ordering barriers, must make those stype values
* act the same as stype zero.
*/
/*
* Completion barriers:
* - Every synchronizable specified memory instruction (loads or stores or both)
* that occurs in the instruction stream before the SYNC instruction must be
* already globally performed before any synchronizable specified memory
* instructions that occur after the SYNC are allowed to be performed, with
* respect to any other processor or coherent I/O module.
*
* - The barrier does not guarantee the order in which instruction fetches are
* performed.
*
* - A stype value of zero will always be defined such that it performs the most
* complete set of synchronization operations that are defined.This means
* stype zero always does a completion barrier that affects both loads and
* stores preceding the SYNC instruction and both loads and stores that are
* subsequent to the SYNC instruction. Non-zero values of stype may be defined
* by the architecture or specific implementations to perform synchronization
* behaviors that are less complete than that of stype zero. If an
* implementation does not use one of these non-zero values to define a
* different synchronization behavior, then that non-zero value of stype must
* act the same as stype zero completion barrier. This allows software written
* for an implementation with a lighter-weight barrier to work on another
* implementation which only implements the stype zero completion barrier.
*
* - A completion barrier is required, potentially in conjunction with SSNOP (in
* Release 1 of the Architecture) or EHB (in Release 2 of the Architecture),
* to guarantee that memory reference results are visible across operating
* mode changes. For example, a completion barrier is required on some
* implementations on entry to and exit from Debug Mode to guarantee that
* memory effects are handled correctly.
*/
/*
* stype 0 - A completion barrier that affects preceding loads and stores and
* subsequent loads and stores.
* Older instructions which must reach the load/store ordering point before the
* SYNC instruction completes: Loads, Stores
* Younger instructions which must reach the load/store ordering point only
* after the SYNC instruction completes: Loads, Stores
* Older instructions which must be globally performed when the SYNC instruction
* completes: Loads, Stores
*/
#define STYPE_SYNC 0x0
/*
* Ordering barriers:
* - Every synchronizable specified memory instruction (loads or stores or both)
* that occurs in the instruction stream before the SYNC instruction must
* reach a stage in the load/store datapath after which no instruction
* re-ordering is possible before any synchronizable specified memory
* instruction which occurs after the SYNC instruction in the instruction
* stream reaches the same stage in the load/store datapath.
*
* - If any memory instruction before the SYNC instruction in program order,
* generates a memory request to the external memory and any memory
* instruction after the SYNC instruction in program order also generates a
* memory request to external memory, the memory request belonging to the
* older instruction must be globally performed before the time the memory
* request belonging to the younger instruction is globally performed.
*
* - The barrier does not guarantee the order in which instruction fetches are
* performed.
*/
/*
* stype 0x10 - An ordering barrier that affects preceding loads and stores and
* subsequent loads and stores.
* Older instructions which must reach the load/store ordering point before the
* SYNC instruction completes: Loads, Stores
* Younger instructions which must reach the load/store ordering point only
* after the SYNC instruction completes: Loads, Stores
* Older instructions which must be globally performed when the SYNC instruction
* completes: N/A
*/
#define STYPE_SYNC_MB 0x10
#ifdef CONFIG_CPU_HAS_SYNC #ifdef CONFIG_CPU_HAS_SYNC
#define __sync() \ #define __sync() \
__asm__ __volatile__( \ __asm__ __volatile__( \
......
...@@ -28,6 +28,7 @@ ...@@ -28,6 +28,7 @@
* - flush_cache_sigtramp() flush signal trampoline * - flush_cache_sigtramp() flush signal trampoline
* - flush_icache_all() flush the entire instruction cache * - flush_icache_all() flush the entire instruction cache
* - flush_data_cache_page() flushes a page from the data cache * - flush_data_cache_page() flushes a page from the data cache
* - __flush_icache_user_range(start, end) flushes range of user instructions
*/ */
/* /*
...@@ -80,6 +81,10 @@ static inline void flush_icache_page(struct vm_area_struct *vma, ...@@ -80,6 +81,10 @@ static inline void flush_icache_page(struct vm_area_struct *vma,
extern void (*flush_icache_range)(unsigned long start, unsigned long end); extern void (*flush_icache_range)(unsigned long start, unsigned long end);
extern void (*local_flush_icache_range)(unsigned long start, unsigned long end); extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
extern void (*__flush_icache_user_range)(unsigned long start,
unsigned long end);
extern void (*__local_flush_icache_user_range)(unsigned long start,
unsigned long end);
extern void (*__flush_cache_vmap)(void); extern void (*__flush_cache_vmap)(void);
......
...@@ -24,7 +24,8 @@ static inline int __pure __get_cpu_type(const int cpu_type) ...@@ -24,7 +24,8 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_LOONGSON3: case CPU_LOONGSON3:
#endif #endif
#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B #if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
case CPU_LOONGSON1: case CPU_LOONGSON1:
#endif #endif
......
...@@ -240,6 +240,7 @@ ...@@ -240,6 +240,7 @@
#define PRID_REV_VR4130 0x0080 #define PRID_REV_VR4130 0x0080
#define PRID_REV_34K_V1_0_2 0x0022 #define PRID_REV_34K_V1_0_2 0x0022
#define PRID_REV_LOONGSON1B 0x0020 #define PRID_REV_LOONGSON1B 0x0020
#define PRID_REV_LOONGSON1C 0x0020 /* Same as Loongson-1B */
#define PRID_REV_LOONGSON2E 0x0002 #define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003 #define PRID_REV_LOONGSON2F 0x0003
#define PRID_REV_LOONGSON3A_R1 0x0005 #define PRID_REV_LOONGSON3A_R1 0x0005
......
...@@ -11,6 +11,11 @@ struct dma_map_ops; ...@@ -11,6 +11,11 @@ struct dma_map_ops;
struct dev_archdata { struct dev_archdata {
/* DMA operations on that device */ /* DMA operations on that device */
struct dma_map_ops *dma_ops; struct dma_map_ops *dma_ops;
#ifdef CONFIG_DMA_PERDEV_COHERENT
/* Non-zero if DMA is coherent with CPU caches */
bool dma_coherent;
#endif
}; };
struct pdev_archdata { struct pdev_archdata {
......
...@@ -9,14 +9,22 @@ ...@@ -9,14 +9,22 @@
#ifndef __ASM_DMA_COHERENCE_H #ifndef __ASM_DMA_COHERENCE_H
#define __ASM_DMA_COHERENCE_H #define __ASM_DMA_COHERENCE_H
#ifdef CONFIG_DMA_MAYBE_COHERENT enum coherent_io_user_state {
extern int coherentio; IO_COHERENCE_DEFAULT,
IO_COHERENCE_ENABLED,
IO_COHERENCE_DISABLED,
};
#if defined(CONFIG_DMA_PERDEV_COHERENT)
/* Don't provide (hw_)coherentio to avoid misuse */
#elif defined(CONFIG_DMA_MAYBE_COHERENT)
extern enum coherent_io_user_state coherentio;
extern int hw_coherentio; extern int hw_coherentio;
#else #else
#ifdef CONFIG_DMA_COHERENT #ifdef CONFIG_DMA_COHERENT
#define coherentio 1 #define coherentio IO_COHERENCE_ENABLED
#else #else
#define coherentio 0 #define coherentio IO_COHERENCE_DISABLED
#endif #endif
#define hw_coherentio 0 #define hw_coherentio 0
#endif /* CONFIG_DMA_MAYBE_COHERENT */ #endif /* CONFIG_DMA_MAYBE_COHERENT */
......
This diff is collapsed.
This diff is collapsed.
...@@ -115,11 +115,7 @@ static inline unsigned long fd_getfdaddr1(void) ...@@ -115,11 +115,7 @@ static inline unsigned long fd_getfdaddr1(void)
static inline unsigned long fd_dma_mem_alloc(unsigned long size) static inline unsigned long fd_dma_mem_alloc(unsigned long size)
{ {
unsigned long mem; return __get_dma_pages(GFP_KERNEL, get_order(size));
mem = __get_dma_pages(GFP_KERNEL, get_order(size));
return mem;
} }
static inline void fd_dma_mem_free(unsigned long addr, unsigned long size) static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment